City of Keizer
EPA ID: OR4100744 · 38,585 people served · 3 ZIP codes
Current EPA status: City of Keizer, 5 open violations, 38,585 people served.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Keizer Source: EPA SDWIS service area boundaries.
Service area boundary — Grade A
Service Area Demographics
The City of Keizer serves a community with a median household income of $69,277 and an estimated 97,167 residents across its service area. Approximately 65% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 31% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
City of Keizer's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 2% of homes in Marion County, Oregon rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How City of Keizer compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 5 mg/L exceeds the EPA maximum of mg/L.
Gross Alpha at 1 pCi/L exceeds the EPA maximum of pCi/L. Increased cancer risk from radioactive particles. Consider reverse osmosis filtration.
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.
Gross Alpha was detected in this water system. reverse osmosis filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Oregon
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Keizer, (EPA ID: OR4100744) is a community water system in Oregon that serves approximately 38,585 people from groundwater sources.
This system provides water to 3 ZIP codes across 2 communities.
Average Home Safety Score: A (88/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Unresolved |
| October 1, 2024 | Gross Alpha | Monitoring | Resolved |
| October 1, 2024 | Stage 1 DBP Rule | Monitoring | Resolved |
| October 1, 2024 | Surface Water Treatment Rule | Monitoring | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Unresolved |
| October 1, 2023 | Surface Water Treatment Rule | Monitoring | Unresolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 5 | No |
| Gross Alpha | Radionuclides | 1 | No |
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 97307 | 0.0022 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Keizer (OR4100744) on EPA.gov.
Frequently Asked Questions
Is City of Keizer water safe to drink?
City of Keizer has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does City of Keizer serve?
City of Keizer serves approximately 38,585 people across 3 ZIP codes in Oregon.
Where does City of Keizer get its water?
The primary water source is groundwater.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from City of Keizer Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: City of Keizer Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Source Water Assessment conducted by Oregon Health Authority and Oregon DEQ. Report on file at Keizer City Hall. Aquifer located beneath entire city. Wells identified for contamination potential from pesticides/herbicides, vehicle fluids, fertilizers.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Watershed exposure sources reported
Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.
Treatment classification and chemical list sourced from City of Keizer Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Notable events from the utility's CCR
These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.
- VOC contamination (tetrachloroethylene, trichloroethylene) detected in Willamette and Cherry Ave wells since 2002; city monitors monthly voluntarily. All detects below MCL.
- Meadows Filter Project completed 2023, online summer 2024 — removes odor, manganese and iron at Meadows Pump Station.
- Degassers added to Meadows Filter Plant, completed September 2025 to address entrapped air issue.
- City sold water to City of Salem in December and January causing irregular high flows and manganese complaints.
- 6 of 15 wells had nitrate detects ranging 0.15-5.47 ppm. MCL is 10 ppm.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Keizer (EPA ID: OR4100744) — request the latest Consumer Confidence Report or ask about specific contaminants.