Water System Report KY

Taylorsville Water Works

EPA ID: KY1080425 · 22,286 people served · 13 ZIP codes

Taylorsville Water Works carries zero EPA violations in five years — a spotless record for a utility serving 22,286 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 59
Avg Safety Score
22,286
People Served
13
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.003 mg/L
Max Lead Level
Zone 1
Radon Risk · High
0
Contaminants Flagged
$260K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 6 (2023) to 2 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Taylorsville Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$85,419
Median Household Income
213,409
Service Area Population
23%
Disadvantaged Population
49th
Poverty Percentile
44th
Energy Burden Percentile
38%
Pre-1986 Housing

The Taylorsville Water Works serves a community with a median household income of $85,419 and an estimated 213,409 residents across its service area.

🌊 Where Does Your Water Come From?

Surface Water

Taylorsville Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
55th
Wastewater Discharge Proximity
36th
Superfund Site Proximity

About 1% of homes in Nelson County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

32 yr
Avg Pipe Age
Copper
Pipe Material
38 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 46% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 38 detections recorded. 12 exceed federal EPA limits (4 ppt for PFOA/PFOS). 12 exceed state limits.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Kentucky

D 0 violations
Fort Campbell
22,000 people
B 0 violations
0 violations
D 0 violations
B 2 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,246
Radon Mitigation $892
PFAS Treatment $554
Water Filtration $23
Total Estimated Cost $2,715

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $2,715 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Taylorsville Water Works (EPA ID: KY1080425) is a community water system in Kentucky that serves approximately 22,286 people from surface water sources.

This system provides water to 13 ZIP codes across 12 communities.

Average Home Safety Score: C (59/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
40071 0.003 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Taylorsville Water Works (KY1080425) on EPA.gov.

Frequently Asked Questions

Is Taylorsville Water Works water safe to drink?

Based on EPA records, Taylorsville Water Works has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Taylorsville Water Works serve?

Taylorsville Water Works serves approximately 22,286 people across 13 ZIP codes in Kentucky.

Where does Taylorsville Water Works get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.

Source: Taylorsville Water Works Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
87
Detections
3
Latest sample
11/4/2025
Highest analyte
PFOA: 6.5 ppt
Analyte Max detected Current MCL Status
PFOA 6.5 ppt 10 ppt Above 2029 federal MCL
PFPeA 4.9 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

55
Confirmed Lead
85
Galvanized — Replacement Required
684
Unknown Material
8,368
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 22,286
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Taylorsville Water Works safe to drink?
Taylorsville Water Works has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Taylorsville Water Works meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Taylorsville Water Works serve?
Taylorsville Water Works serves approximately 22,286 people with drinking water across 13 ZIP codes.
What is Taylorsville Water Works's water source?
Taylorsville Water Works draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Taylorsville Water Works's water?
The maximum detected lead level is 0.003 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Taylorsville Water Works's service area?
The Taylorsville Water Works service area has a median household income of $85,419. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Taylorsville Water Works get its water?
Taylorsville Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Taylorsville Water Works (EPA ID: KY1080425) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Taylorsville Water Works

Get safety alerts for Taylorsville Water Works, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.