Monitoring Violations OR

City of Hillsboro

EPA ID: OR4101513 · 92,632 people served · 7 ZIP codes

In the five-year tracking period, City of Hillsboro filed 7 violations — each has been cleared, and the utility now meets all federal standards for its 92,632 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 75
Avg Safety Score
92,632
People Served
7
ZIP Codes Served
7
Violations (5yr)
Surface Water
Water Source
0.0011 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
4
Contaminants Flagged
$480K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2021) to 2 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Hillsboro Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$96,962
Median Household Income
247,352
Service Area Population
9%
Disadvantaged Population
30th
Poverty Percentile
20th
Energy Burden Percentile
45%
Pre-1986 Housing

The City of Hillsboro serves a community with a median household income of $96,962 and an estimated 247,352 residents across its service area. Approximately 45% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

City of Hillsboro's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 2% of homes in Washington County, Oregon rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

39 yr
Avg Pipe Age
Copper
Pipe Material
31 yr
Est. Remaining Life
Stable
Decay Status
Installed 56% of expected lifespan used End of life

Detected Contaminants

How City of Hillsboro compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

E. coli at 1 Zero tolerance (any positive sample triggers immediate action) exceeds the EPA maximum of Zero tolerance (any positive sample triggers immediate action). Severe GI illness; potentially fatal kidney failure in children. Consider UV disinfection (99.99%) filtration.

Fecal Coliform at 1 presence exceeds the EPA maximum of presence.

E. coli was detected in this water system. UV disinfection (99.99%) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Oregon

City of Beaverton
88,045 people
0 violations
Medford Water Commission
106,068 people
B 8 violations
City of Bend
77,704 people
A 7 violations
City of Gresham
73,932 people
B 7 violations
Rockwood Pud
65,443 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,286
Radon Mitigation $400
Water Filtration $86
Total Estimated Cost $1,771

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,771 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Hillsboro, (EPA ID: OR4101513) is a community water system in Oregon that serves approximately 92,632 people from surface water sources.

This system provides water to 7 ZIP codes across 5 communities.

Average Home Safety Score: B (75/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

7 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Resolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
July 1, 2023 E. coli Monitoring Resolved
July 1, 2023 Fecal Coliform Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 4 No
Stage 1 DBP Rule Treatment Failure 1 No
E. coli Microbiological 1 No
Fecal Coliform Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
97123 0.0011 mg/L No N/A
97124 0.0011 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OR or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Hillsboro (OR4101513) on EPA.gov.

Frequently Asked Questions

Is City of Hillsboro water safe to drink?

City of Hillsboro has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Hillsboro serve?

City of Hillsboro serves approximately 92,632 people across 7 ZIP codes in Oregon.

Where does City of Hillsboro get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
28,351
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 92,632
Reported to Oregon

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from City of Hillsboro safe to drink?
City of Hillsboro earns a B safety grade with 7 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Hillsboro's water?
Detected contaminants include Surface Water Treatment Rule, Stage 1 DBP Rule, E. coli, Fecal Coliform. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Hillsboro serve?
City of Hillsboro serves approximately 92,632 people with drinking water across 7 ZIP codes.
What is City of Hillsboro's water source?
City of Hillsboro draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Hillsboro's water?
The maximum detected lead level is 0.0011 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Hillsboro's service area?
The City of Hillsboro service area has a median household income of $96,962. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Hillsboro get its water?
City of Hillsboro's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Hillsboro (EPA ID: OR4101513) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Oregon City of Hillsboro

Get safety alerts for City of Hillsboro, Oregon

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.