Monitoring Violations MT

Fort Peck Rural County Water District

EPA ID: MT0004177 · 663 people served · 1 ZIP code

Over the tracked period, Fort Peck Rural County Water District logged 1 EPA violation — each has been remedied, and the system now supplies 663 people in good standing.

Data: EPA SDWIS Last verified: 2026-04-02

B · 70
Avg Safety Score
663
People Served
1
ZIP Code Served
1
Violations (5yr)
Surface Water
Water Source
0.005 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$443K
Median Home Value in Service Area

Service Area Map

Coverage area for Fort Peck Rural County Water District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$150,313
Median Household Income
25
Service Area Population
67%
Disadvantaged Population
60th
Poverty Percentile
60th
Energy Burden Percentile
75%
Pre-1986 Housing

The Fort Peck Rural County Water District serves a community with a median household income of $150,313 and an estimated 25 residents across its service area. Approximately 75% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 67% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Fort Peck Rural County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

About 0% of homes in Valley County, Montana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

65 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Stable
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Fort Peck Rural County Water District compares to EPA limits

Barium 1 mg/L (50% of limit)
0 EPA Limit: 2 mg/L

Comparable Water Systems

Similar-sized systems in Montana

0 violations
D 31 violations
Cascade Town of
650 people
B 0 violations
Circle Town of
644 people
D 5 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $1,200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,400 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Fort Peck Rural County Water District (EPA ID: MT0004177) is a community water system in Montana that serves approximately 663 people from surface water sources.

This system serves ZIP code 59223 in Fort Peck.

Average Home Safety Score: B (70/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
January 1, 2024 Barium Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Barium Inorganic 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
59223 0.005 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Fort Peck Rural County Water District (MT0004177) on EPA.gov.

Frequently Asked Questions

Is Fort Peck Rural County Water District water safe to drink?

Fort Peck Rural County Water District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Fort Peck Rural County Water District serve?

Fort Peck Rural County Water District serves approximately 663 people across 1 ZIP code in Montana.

Where does Fort Peck Rural County Water District get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: FORT PECK RURAL COUNTY WATER DISTRICT Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from FORT PECK RURAL COUNTY WATER DISTRICT Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
0
Galvanized — Replacement Required
3
Unknown Material
397
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 663
Reported to Montana

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Fort Peck Rural County Water District safe to drink?
Fort Peck Rural County Water District earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Fort Peck Rural County Water District's water?
Detected contaminants include Barium. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 recorded violation, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Fort Peck Rural County Water District serve?
Fort Peck Rural County Water District serves approximately 663 people with drinking water across 1 ZIP code.
What is Fort Peck Rural County Water District's water source?
Fort Peck Rural County Water District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Fort Peck Rural County Water District's water?
The maximum detected lead level is 0.005 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Fort Peck Rural County Water District's service area?
The Fort Peck Rural County Water District service area has a median household income of $150,313. EPA EJScreen data classifies 67% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Fort Peck Rural County Water District get its water?
Fort Peck Rural County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Fort Peck Rural County Water District (EPA ID: MT0004177) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Montana Fort Peck Rural County Water District

Get safety alerts for Fort Peck Rural County Water District, Montana

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.