Health Violations Found CA 1 HEALTH VIOLATION

Alpaugh Community Services District

EPA ID: CA5410050 · 871 people served · 1 ZIP code

Over the past five years, Alpaugh Community Services District recorded 1 violation, all subsequently resolved through the EPA enforcement process — the supplier currently operates in good standing, with no active actions on file for its 871 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 70
Avg Safety Score
871
People Served
1
ZIP Code Served
1
Violations (5yr)
Groundwater
Water Source
0.0085 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$93K
Median Home Value in Service Area

Service Area Map

Coverage area for Alpaugh Community Services District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$51,181
Median Household Income
1,146
Service Area Population
78%
Disadvantaged Population
70th
Poverty Percentile
60th
Energy Burden Percentile
58%
Pre-1986 Housing

The Alpaugh Community Services District serves a community with a median household income of $51,181 and an estimated 1,146 residents across its service area. Approximately 58% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 78% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Alpaugh Community Services District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 1% of homes in Tulare County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

54 yr
Avg Pipe Age
Copper
Pipe Material
16 yr
Est. Remaining Life
Stable
Decay Status
Installed 77% of expected lifespan used End of life

Detected Contaminants

How Alpaugh Community Services District compares to EPA limits

Barium 1 mg/L (50% of limit)
0 EPA Limit: 2 mg/L

Comparable Water Systems

Similar-sized systems in California

B 4 violations
B 2 violations
Inyokern Csd
878 people
C 6 violations
0 violations
City of Tulelake
856 people
A 7 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Water Filtration
Radon Mitigation $400
Water Filtration $300
Total Estimated Cost $700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $700 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Alpaugh Community Services District (EPA ID: CA5410050) is a community water system in California that serves approximately 871 people from groundwater sources.

This system serves ZIP code 93201 in Alpaugh.

Average Home Safety Score: B (70/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. All violations have been resolved.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Barium Inorganic 1 Yes

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
93201 0.0085 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Alpaugh Community Services District (CA5410050) on EPA.gov.

Frequently Asked Questions

Is Alpaugh Community Services District water safe to drink?

Alpaugh Community Services District has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Alpaugh Community Services District serve?

Alpaugh Community Services District serves approximately 871 people across 1 ZIP code in California.

Where does Alpaugh Community Services District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(559) 949-8199, (559) 303-9082
Address
5446 Tule Road, Alpaugh, California

Contact information from Alpaugh Community Services District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Alpaugh Community Services District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Alpaugh Community Services District Consumer Confidence Report:
A source water assessment was completed in March 2004. The activities to which the Alpaugh water system is most vulnerable include septic systems and agricultural wells.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Septic systemsAgricultural wells

Treatment classification and chemical list sourced from Alpaugh Community Services District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
413
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 871
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

Fluoride
0.89 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Total dissolved solids
160 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from Alpaugh Community Services District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL · Arsenic
    Date not published
    Our system does not meet the MCL for Arsenic. Some people who drink water containing arsenic in excess of the MCL over many years may experience skin damage or circulatory system problems, and may have an increased risk of getting cancer. We are looking into options to do away with the arsenic, one being to drill new wells or to locate other wells in the area that do not have the arsenic levels we do. The other options are systems that filter the arsenic out of the water.
  • MCL · Color
    Date not published
    Our system is over the MCL in color in water. The secondary standards cover the constituents in the water that affect the aesthetics of the water, in order to keep an acceptable quality. There is no health effects language for secondary standards.

Violations record from Alpaugh Community Services District Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Alpaugh Community Services District safe to drink?
Alpaugh Community Services District earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Alpaugh Community Services District's water?
Detected contaminants include Barium. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 recorded violation, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Alpaugh Community Services District serve?
Alpaugh Community Services District serves approximately 871 people with drinking water across 1 ZIP code.
What is Alpaugh Community Services District's water source?
Alpaugh Community Services District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Alpaugh Community Services District's water?
The maximum detected lead level is 0.0085 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Alpaugh Community Services District's service area?
The Alpaugh Community Services District service area has a median household income of $51,181. EPA EJScreen data classifies 78% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Alpaugh Community Services District get its water?
Alpaugh Community Services District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Alpaugh Community Services District (EPA ID: CA5410050) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems California Alpaugh Community Services District

Get safety alerts for Alpaugh Community Services District, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.