⚠ 3 violations recorded in 2024 (+1 vs 2021)
Health Violations Found
B 74

Crawfordville, FL: PFAS Above EPA Limit — 74/100 (2026)

EPA data for City of Tallahassee

Health Violations Found PFAS Detected High Flood Risk

The EPA file for 32327 in Crawfordville, FL includes 3 violations rated as health-based — the more serious category, where contaminant readings surpassed applicable federal safety limits rather than just missing a reporting deadline.

Data source: U.S. Environmental Protection Agency (EPA) SDWIS Last verified: April 2, 2026

Based on EPA Drinking Water FEMA Flood Data U.S. Census CDC Energy Information Admin. USGS Water Data & 9 more federal sources
Today's Safety: Poor
AQI 56 Violations: 3 active Alerts: 0
2026-06-03
Your water right now: 3 health violations
AQI: 56 (Moderate) Lead: 3.0 ppb
See details ↓
Updated: 2026-06-03

Key Findings

Health-Based Water Violations 3 health violation(s) on record
High Flood Risk 774 FEMA flood claims in this ZIP
PFAS Detected in Water Supply "Forever chemicals" detected in local water system

3 other areas checked — no concerns found.

Safety Score
B 74/100
▼ -1 vs last year
Water Quality Issues 3 health violations
Lead Risk Safe 0.003 mg/L
Flood Risk High 774 claims
Data confidence: High (direct measurement) Medium (sampled / sub-geography) Low (modeled / inferred) Methodology →

At a Glance

  • Water EPA records show 3 health-based violations and 9 non-health on the water system serving this ZIP (5-year window).
  • Lead Lead reading of 0.003 mg/L is well below EPA action level.
  • PFAS PFAS levels exceed EPA MCL on at least one compound (UCMR5 sampling).
  • Radon EPA Zone 3 — low predicted indoor radon (below 2 pCi/L).
  • Flood 774 cumulative NFIP flood claims — persistent flood exposure.

Composite Home Safety Score has declined -1 points in the last 90 days.

Contaminant Summary
Health Violations
12 / 15 exceed limits
15 tested 12 violations 3 health-based PFAS detected 2 risks identified
Data updated: Apr 2026 ✓ All data sources current

What’s Happening in Crawfordville, Florida

3 active health-based violations are currently on record for the water system serving this ZIP. PFAS (forever chemicals) have been detected in the local water supply.

What's Happening

declining

Violations increasing

▼ Violations increased from 2 in 2021 to 3 in 2024.

Updated 2026-06-03 · Based on EPA and public utility data

B
Home Safety Score: 74 / 100
↓ -1 vs 2025
7
Water Systems
200,480
People Served
3
Health Violations (5yr)Median is 0 — most ZIPs have none
Groundwater
Water Source
0.003 mg/L
Lead Level1.5× the national median
Zone 3
Radon Risk · Low
$216K
Median Home Value27% below state median ($296K)
🌊
Your #1 Priority

Check your flood insurance coverage

This ZIP has 774 FEMA flood insurance claims on record. Standard homeowner insurance does not cover flood damage.

Flood insurance: $700–$1,500/year average. Flood damage repair: $10,000–$50,000+. Get a Flood Insurance Quote →

Recommended Buyer Guides for This ZIP

Independent guides — grounded in EPA, NSF, FEMA, and CDC standards. Matched to risks detected in your area.

This Summer — what to check

Season-specific maintenance for home safety. Universal tasks — apply everywhere unless noted.

  • Water Heater

    Flush sediment (1–2×/year). Cuts energy use and prevents bacterial growth in low-use hot-water pockets.

    Source: DOE
  • Wildfire & Smoke

    Clear leaves and debris from gutters and the 30-ft home-ignition zone. Replace HVAC filters with MERV 13+.

    Source: Firewise
  • HVAC Filter

    Peak AC run. Replace filters monthly during high pollen / wildfire-smoke days; standard interval otherwise.

    Source: EPA IAQ

Get notified when water quality changes in your area

Free alerts when new EPA data affects ZIP code 32327. No spam — just safety updates.

Unsubscribe anytime. We only send updates when your safety score changes. See our Privacy Policy.

Share Your Home Safety Score
Share on X Share on Facebook

Tip: You can also screenshot the card above to share it as an image.

● Lead Level: higher than 63% of U.S. ZIP codes ● EPA Violations: more than 86% of U.S. ZIP codes ● Health Violations: more than 91% of U.S. ZIP codes ● Flood Claims: more than 97% of U.S. ZIP codes

How Crawfordville Compares

Safety Score vs. Wakulla County and Florida averages

Safety Score
Crawfordville
74
Wakulla County
66
Florida avg
73
Better than 67% of ZIPs in Wakulla County 3.5x more violations than county average
Metric Crawfordville Wakulla County Florida
Safety Score 74 66 73
EPA Violations (total) 12 3.4 23.7
Lead (ppb) 3 3.3 2.3

County and state averages computed from 41,344 ZIP codes. Data: EPA SDWIS.

🔴
Critical Risk Signals
Multiple high-priority conditions detected — action recommended

Each number below connects you directly to a licensed specialist contractor in your area. Calls are free.

774 FEMA flood insurance claims filed in this ZIP

Average claim payout: $18,183

172 claims in the past 5 years

Median home age: 34 years — older homes have higher mold risk after flooding

What to do Schedule a professional mold inspection, especially in basements and crawl spaces. Consider flood insurance if not already covered.
Estimated cost: $300–$600 for mold inspection, $1,500–$5,000 for remediation

3 health-based water quality violations on record

12 total EPA violations recorded for City of Tallahassee

Recent EPA enforcement actions against this water system

What to do Review your water system's Consumer Confidence Report. Consider installing a whole-house water filtration system.
Estimated cost: $300–$800 for under-sink RO, $1,500–$3,500 for whole-house filter

See incorrect data? Let us know

🔍Key Insights for Crawfordville 32327

Derived from EPA, Census, FEMA, and EIA data — exclusive to ZipCheckup

Water System Reliability
36 /100 Poor
Reliability score based on violation trends, system size, CCR compliance, and enforcement history. The national median is 10/100.
Infrastructure Investment Gap
$2,250
Estimated per-household infrastructure deficit based on housing age, pipe materials, lead risk, and water system violations. That's 225.0x the national median of $10.
Seasonal Risk
High Seasonal
Year-round contamination risk from seasonal factors: radon peaks in winter, flooding in spring, air quality in summer. Key factors: High flood zone (VE), High flood claim history, Moderate air quality concerns.
Environmental Justice Index
50 /100 High
Communities with high violations, low income, and environmental hazards face disproportionate risk. Higher score = greater environmental justice concern. The national median is 10/100.
Home Purchase Risk
52 /100 Moderate Risk
Composite "should I buy here?" score for homebuyers. Weighs water quality (25%), flood risk (20%), lead (15%), energy costs (15%), housing age (10%), radon (10%), and air quality (5%). The national median is 10/100.
Methodology: Lead exposure combines EPA LCR testing, Census housing age (ACS B25034), and LCRI service line estimates. Maintenance debt uses Census median build year and NAHB equipment lifespan data. Compliance risk weights health violations, unresolved issues, and EPA enforcement actions. Energy burden uses EIA state rates and Census B19013 median income. Flood cost uses FEMA NFIP claims data (1978–2024) divided by housing units. Water system reliability cross-references violation trends, system size, CCR compliance, and enforcement history. Infrastructure gap estimates deferred costs from housing vintage, pipe materials, and lead detection. Seasonal risk combines radon zones, flood zones, housing age, and air quality data. Environmental justice index weights violations, income disparity, Superfund proximity, and enforcement actions. Home purchase risk is a weighted composite of all environmental and infrastructure factors. Full methodology →
📊 ZipCheckup Cross-Reference Engine · Updated March 2026 · View source →

Score Breakdown

How your Home Safety Score of 68 is calculated.

Water
13/25
Lead
25/25
Radon
25/25
Flood
5/25
68 = Water 13/25 + Lead 25/25 + Radon 25/25 + Flood 5/25

Score dropped 1 point over 90 days.

Safety & Health (10) HIGH

Compliance Alerts for 32327

2 issues flagged based on EPA data, state regulations, and housing age estimates.

⚠
PFAS Contamination
Action Needed
PFAS detected in water supply. A reverse osmosis (RO) filter certified NSF/ANSI 58 is recommended.
ⓘ
Electrical Panels
Monitor
FPE/Zinsco panel risk — 23

Estimates based on EPA data, U.S. Census ACS housing vintage, and state regulations. Individual homes may vary.

📊 EPA + Census ACS + State Regs · Updated March 2026

Compliance Risk Forecast

Probability of future drinking water violations based on historical patterns, enforcement trends, and system size.

High Risk ▼ Declining trend

95% probability of new violation within 2 years

1-Year 93%
2-Year 95%
3-Year 95%

Based on 2.7 events/year rate. Model uses Poisson distribution with trend and system-size adjustments.

Service Disruption Risk

Critical
85%

85% estimated probability of a boil water advisory or service interruption in the next 90 days.

Based on infrastructure age, EPA violation history, flood exposure, and seasonal patterns.

Contributing Factors
Health Violations
+30%
Violation History
+25%
Flood Exposure
+15%
Seasonal Baseline
+10%
Infrastructure Age
+5%

Estimates based on EPA enforcement data, U.S. Census ACS housing vintage, and FEMA flood claims. Not a guarantee of disruption.

📊 EPA + Census ACS + FEMA · Updated March 2026

Your Water System

ZIP code 32327 in Crawfordville, Florida is served by City of Tallahassee (EPA ID: FL1370655). This system provides water to approximately 200,480 people from groundwater sources.

There are 7 community water systems serving this area.

Home Safety Score: B (74/100)

Based on water quality violations, lead levels, and radon risk in your area. This score is better than 64% of ZIP codes nationally and 51% in Florida.

Factor Status Details
Water Quality poor 12 violations, 3 health-based
Lead in Water safe 0.003 mg/L (EPA action level: 0.015 mg/L)
Radon Risk Low Zone 3
Gas Safety low 0 incidents, score 0/100
Wildfire Smoke moderate score 33/100, 17 county fires (5yr)
Earthquake Risk Very Low score 0.6/50
Superfund NPL Very Low nearest 28.7 mi (Post and Lumber Preserving Co. Inc.), 0 sites within 10 km

Lead & Copper in Your Water

The EPA requires water systems to monitor lead and copper levels under the Lead and Copper Rule.

Metal Measured Level EPA Action Level Status Sample Date
Lead 0.003 mg/L 0.015 mg/L Within limit N/A
Copper 2.1815 mg/L 1.3 mg/L Exceeds action level N/A

Radon Risk

Radon Zone 3 — Low potential (Wakulla County)

Lower radon potential for this area, but testing is still recommended for individual homes. Zone 3 indicates a predicted average indoor radon screening level below 2 pCi/L. Actual levels can vary based on home construction and geology.

CO & Gas Safety

Gas Distribution Risk: Low (score: 0/100)

No gas distribution incidents recorded in this county since 2004.

The CPSC recommends CO detectors on every level of your home. Have gas appliances inspected annually by a licensed technician.

Wildfire & Smoke Risk

Smoke Risk: Moderate (score: 33/100)

17 wildfires recorded in this county over the past 5 years. Nearest recent wildfire: 9 km (6 miles).

Monitor air quality at AirNow.gov during fire season (June–November). A HEPA air purifier can reduce indoor PM2.5 by up to 80% during smoke events.

Earthquake & Seismic Risk

Risk Rating: Very Low (score: 0.6/50)

Metric Value
Risk Score 0.6
Risk Rating Very Low
Annual Frequency < 0.001 damaging events/yr
Expected Annual Loss $16K (Very Low)

Monitor seismic activity at the USGS Earthquake Map. Secure heavy furniture, maintain an emergency kit, and know your gas shutoff location.

Superfund Site Proximity

Proximity Risk: Very Low (score: 9/100)

Nearest NPL site: Post and Lumber Preserving Co. Inc. at 28.7 miles (46.2 km).

Radius NPL Sites
Within 5 km (3.1 mi) 0
Within 10 km (6.2 mi) 0
Within 25 km (15.5 mi) 0

Nearest NPL Sites

  • Post and Lumber Preserving Co. Inc. — 28.7 mi (Active Cleanup), listed 08/03/2017

Search nearby sites at the EPA Superfund Site Search. If you garden or use well water near an NPL site, consider soil and water testing.

Violation Summary

3 health-based violations recorded in the past 5 years. 10 violations remain unresolved.

Recent Violations

Date Contaminant Type Status
April 1, 2024 Haloacetic Acids (HAA5) Health-based Unresolved
January 1, 2024 Haloacetic Acids (HAA5) Health-based Resolved
February 1, 2023 Consumer Confidence Report Rule Monitoring Unresolved
February 1, 2023 Total Coliform Monitoring Unresolved
January 1, 2023 Consumer Confidence Report Rule Monitoring Unresolved
January 1, 2023 Total Coliform Monitoring Unresolved
January 1, 2023 Consumer Confidence Report Rule Monitoring Unresolved
January 1, 2023 Consumer Confidence Report Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for water systems serving this ZIP code:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting 4 No
Haloacetic Acids (HAA5) Disinfection Byproducts 4 Yes
Total Coliform Microbiological 2 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Stage 1 DBP Rule Treatment Technique 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

PFAS Contamination

PFAS ("forever chemicals") have been detected in water systems serving this ZIP code. One or more PFAS compounds exceed EPA maximum contaminant levels (MCLs).

PFAS detected: PFOS, PFPeA, PFHxA, PFBS.

Highest measured level: 0.016 µg/L across all detected compounds.

PFAS (per- and polyfluoroalkyl substances) are a group of synthetic chemicals that do not break down in the environment or the human body. Long-term exposure has been linked to immune system effects, hormone disruption, and increased cancer risk.

Recommended filtration: Reverse osmosis (RO) or activated carbon block filters certified NSF/ANSI 58 or NSF/ANSI 53 are the most effective at reducing PFAS in drinking water.

Learn more about PFAS in drinking water →

Energy Costs in FL

Residential electricity rate: 15.92¢/kWh — 6% below the national average (17.0¢/kWh).

Lower electricity rates in Florida make electric appliances and heat pumps a cost-effective choice compared to other states.

Energy Sources

Florida generates 9.4% of its electricity from renewable sources — 18% below the national average of 26.9%. Including nuclear, 20.8% of the state's power is carbon-free (EIA 2025).

Source Share
Natural gas 72.9%
Nuclear 11.4%
Solar 9.3%
Coal 3.8%
Petroleum 0.5%

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

Water Systems Serving This Area

System Name EPA ID Population Source
City of Tallahassee, FL1370655 200,480 Groundwater
City of Sopchoppy FL1650612 12,290 Groundwater
Wakulla Regional (aka Gulf Coast) FL1650785 10,637 Groundwater
Panacea Area Water System FL1650514 3,020 Groundwater
Winco Utilities W/s FL1650791 3,545 Groundwater
Wakulla Water System (riversink) FL1650792 225 Groundwater
Mysterious Waters Subdivision FL1650778 117 Groundwater

What You Can Do

  1. Request your water system's Consumer Confidence Report (CCR) — Your utility is required to publish this annually
  2. Consider a home water test — Independent testing can reveal issues in your specific plumbing
  3. Install a certified water filter — NSF-certified filters can address specific contaminants
  4. Contact your water provider — Ask about current treatment and any ongoing remediation

Need help with water testing or filtration?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

Other Water Quality Reports in Florida

Nearby Water Quality Reports

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Tallahassee (FL1370655) on EPA.gov.

Frequently Asked Questions

Is the tap water in 32327 safe to drink?

Crawfordville's water system has recorded 3 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

Where does 32327's water come from?

The primary water source for this area is groundwater. City of Tallahassee serves approximately 200,480 people.

How can I get my water tested?

Contact your local water utility for a free water quality report, or hire a certified lab for independent home water testing. The EPA recommends testing annually if you use a private well.

Does 32327 have lead in the water?

Lead and Copper Rule sampling data for ZIP code 32327 shows a lead level of 0.003 mg/L, which is below the EPA action level of 0.015 mg/L. Still, older homes with lead service lines or pre-1986 plumbing may have higher levels at individual taps.

What is the radon risk in 32327?

ZIP code 32327 (Wakulla County) falls in EPA Radon Zone 3, indicating low radon potential. Zone 3 areas have lower radon potential, though individual homes can still have elevated radon levels depending on construction and local geology. Testing is still recommended.

USGS reports that 4 of the top compounds applied across the surrounding county are flagged by the EPA for drinking-water monitoring — see the agricultural pesticide-use section

📊 EPA Safe Drinking Water · Updated March 2026 · View source →

Your Water Source: Tallahassee, City Of

22 ZIP codes share this system
Source: Groundwater
Serving 200,480 people
Avg. score: 64/100

⚠ 20 of 22 communities on this water system have reported EPA violations, including 560 health-based violations (3020 still unresolved).

This system draws from groundwater (wells or aquifers). Groundwater systems can be affected by naturally occurring contaminants like arsenic and radon, as well as industrial or agricultural contamination that seeps into aquifers over time.

Other ZIP codes on this system

System ID: FL1370655 · Source: EPA SDWIS

Contaminant Stress Analysis

Statistical envelope (p10/p50/p90) of measured contaminant levels compared to EPA Maximum Contaminant Levels (MCL). Based on enforcement and compliance monitoring data.

Total Trihalomethanes (UG/L) 3 measurements
▼ Improving Exceeds MCL
MCL 80
p10: 87.35 p50: 88.69 p90: 122

Even in the best-case scenario (10th percentile), Total Trihalomethanes levels at 87.35 UG/L exceeded the safe limit of 80 UG/L. All measured values surpass the EPA maximum contaminant level.

Lead (LCR 90th) (PPB) 3 measurements
▼ Improving
MCL 15
p10: 1.4 p50: 2 p90: 2.1

All measured values of Lead (LCR 90th) remain below the MCL of 15 PPB.

📊 EPA SDWIS Enforcement & Compliance · Updated March 2026 · View source →

Florida Water Quality Overview

Statewide grade: B (73/100)

Florida relies primarily on federal EPA standards but maintains active monitoring through the DEP for its thousands of public water systems. ZipCheckup analyzes lab results from 4,515 water systems across Florida, covering 16 contaminants from 4 data sources. The most frequently tested contaminants include Lead (Pb 90th %ile), NMeFOSAA, NEtFOSAA. Overall, Florida earns a water quality grade of B (average score: 73/100) across 1,484 ZIP codes. 84% of tested systems have at least one EPA violation on record. If you live in Florida, review the contaminant table above for your specific water system — state averages may not reflect local conditions.

4,515 systems tested
16 contaminants tracked
1,484 ZIP codes
Florida vs. federal limits →
📊 State Environmental Agency · Updated March 2026

Score History

↓ Declining Score changed from 80 to 74 over 1615 days (-6)
30-day change: 0 90-day change: -1

Tracking since 2021-12-31 · 59 data points

Safety Score Timeline

85+ 70–84 55–69 <55 Oldest → Newest · 24 data points

Compliance History

2021 2 2022 2023 2024 3 2025
Health-based (MCL/TT) Other violations

Environmental Incidents

15
Active Issues
EPA enforcement actions & health violations in 32327 (last 5 years)
Enforcement Actions
10
0 formal
Health Violations
5
3 unresolved
Last Enforcement
2024-09-18
Last Violation
2024-04-01

Health-Based Violations

HAA5 — 61.76 UG/L
Pending
MCL violation · 2024-04-01 to 2024-06-30
Total Trihalomethanes — 88.6913 UG/L
Pending
MCL violation · 2024-04-01 to 2024-06-30
Total Trihalomethanes — 87.3513 UG/L
Resolved
MCL violation · 2024-01-01 to 2024-03-31
Operator Certification
Resolved
MCL violation · 2021-04-01 to 2021-04-30
Total Trihalomethanes — 122 UG/L
Pending
MCL violation · 2021-04-01 to 2021-06-30

Enforcement Actions

State Informal Action
2024-09-18
State Informal Enforcement
2024-09-13
State Informal Action
2024-08-15
State Informal Enforcement
2024-07-15
State Informal Action
2024-05-07
State Order Extension
2024-05-07
State Informal Enforcement
2024-04-10
State Order Extension
2023-08-08
State Order Extension
2023-07-27
State Informal Action
2021-11-29

Understanding EPA Enforcement

  • MCL Violation — Contaminant exceeded the Maximum Contaminant Level set by EPA
  • Treatment Technique (TT) — Water system failed to follow required treatment methods
  • Formal Enforcement — EPA or state issued a legal order (administrative order, court action, or compliance order)
  • Resolved — The water system returned to compliance
ⓘ
This ZIP code has 3 unresolved health violations. Consider testing your water independently or using a water filter rated for the specific contaminants found.

Source: EPA Enforcement and Compliance History Online (ECHO). Data from the Safe Drinking Water Information System (SDWIS). Updated quarterly.

PFAS Contamination Detected

PFAS ("forever chemicals") have been detected in water systems serving ZIP code 32327. One or more compounds exceed EPA maximum contaminant levels.

Detected compounds: PFOS, PFPeA, PFHxA, PFBS.

Highest measured level: 0.016 µg/L

Reverse osmosis (RO) and activated carbon block filters certified NSF/ANSI 58 or NSF/ANSI 53 are the most effective at reducing PFAS levels at the tap.

📊 EPA UCMR5 · Updated March 2026 · View source →

Health Risks from Detected Contaminants

Haloacetic Acids (HAA5)

High Risk

EPA limit: 0.06 mg/L · 4 violations on record

Cancer risk; reproductive & developmental effects

At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water

Removal: granular activated carbon (GAC), carbon block filter, reverse osmosis · Find a filter →

Total Trihalomethanes (TTHM)

High Risk

EPA limit: 0.08 mg/L

Bladder & rectal cancer risk; reproductive concerns

At-risk groups: pregnant women, long-term consumers of chlorinated water, people who frequently shower in chlorinated water

Removal: granular activated carbon (GAC), carbon block filter, point-of-entry aeration · Find a filter →

📊 EPA SDWIS + SDWA · Updated March 2026 · View source →

Consumer Confidence Report

2024 Report

Annual water quality report published by City of Tallahassee for ZIP code 32327.

15
Contaminants Tested
0
MCL Violations
💧 Water source: Groundwater

Key Contaminants

Contaminant Level MCL Status
Lead (point of entry) 600 ppb 15 ppb Exceeds MCL
Mercury 100 ppb 2 ppb Exceeds MCL
Uranium 500 ppb 30 ppb Exceeds MCL
Tetrachloroethylene 1.78 ppb 3 ppb Within Limit

Lead & Copper Rule Results

Lead (90th percentile): 1.4 ppb — EPA action level: 15 ppb
Copper (90th percentile): 0.52 ppm — EPA action level: 1.3 ppm

What Is a Consumer Confidence Report?

Every community water system in the U.S. is required by the EPA to publish an annual Consumer Confidence Report (CCR), also known as a Water Quality Report. It lists all detected contaminants, their levels compared to federal limits (MCLs), and information about where your water comes from.

How to Read Your CCR

  • MCL (Maximum Contaminant Level) — the highest level of a contaminant allowed in drinking water
  • MCLG (Maximum Contaminant Level Goal) — the level below which there is no known health risk
  • Action Level — used for lead and copper; triggers treatment if exceeded at the 90th percentile
  • A violation means detected levels exceeded the MCL — your utility must notify you and take corrective action
📊 Water Utility CCR Report · Updated March 2026 · View source →
💧

Based on your water data

Reverse Osmosis (under-sink) · $150–$500 · NSF/ANSI 58, NSF/ANSI 372

Removes 99%+ of lead and PFAS. Addresses Uranium detected in your water.

View details →
Reverse Osmosis (under-sink) · $180–$250 · NSF/ANSI 58

6-stage RO with alkaline remineralization. View details →

🧪 Verify your water first

CCR data shows community averages. A home water test confirms what's actually coming from your tap. Tap Score Advanced Lead & Heavy Metals ($149) — focused heavy metals panel at lower cost. Get test kit →

Product links are affiliate links — we may earn a commission at no extra cost to you. Recommendations are based on NSF certifications and EPA contaminant data, not advertiser influence. See our disclosure.

Childhood Environmental Risk Score — 32327

Moderate Risk
39/100
Childhood Environmental Risk Score
Combining water lead, air toxics, housing age & EPA violations

This ZIP's score is higher than 38% of U.S. ZIP codes and 68% of those in Florida — a relative ranking, not a verdict on any home.

Risk Factor Breakdown

Housing Lead Paint Probability 4/100
4% of homes built before 1970, when lead paint was widely used.
Water System Violations 83/100
EPA water system violation history for this area.
What weighs most here

Water system violation history is the largest contributor to this ZIP's score. A pattern of violations can signal recurring quality issues worth monitoring, and reviewing a system's recent record helps families know what to ask about.

Pre-1970 Housing
4%
homes likely containing lead paint
EPA Radon Zone Zone 3
Zone 3 indicates lower radon potential, though individual homes can still test high depending on construction and local geology.
Radon is a naturally occurring radioactive gas. Children spend more time at home than adults, and a radon test kit is inexpensive.
Important Health Information
  • Children under 6 are most vulnerable to lead exposure — there is no safe level of lead in blood
  • Test your home's drinking water, especially if your home was built before 1986

What families can do

Here are calm, practical steps families in this ZIP can consider — informational guidance, not cause for alarm.

No specific actions are flagged for this ZIP. The general guidance above still applies to every family.

Share with other parents

Know a family in 32327? A free 30-second ZIP check shows them the same lead, water, and housing data.

Disclaimer: This environmental health risk assessment uses publicly available data from the EPA, Census Bureau, and CDC to estimate relative risk levels. It is not a medical diagnosis or substitute for professional health advice. Individual exposure depends on many factors not captured in this analysis. Consult your pediatrician or local health department for specific guidance. Data sources: EPA AirToxScreen, EPA SDWIS, U.S. Census Bureau, CDC Childhood Blood Lead Surveillance.
📊 EPA AirToxScreen, SDWIS, Census, CDC · Updated March 2026 · View source →

Lead Pipe Replacement Funding for Florida

$28.6M
allocated in fiscal year 2025 for lead service line replacement
ⓘ
Up to $14.0M available as grants for disadvantaged communities (49% of allocation)

Key LCRI Deadlines

✓
Now
Your water system must notify you if you have a lead service line
1
Oct 2027
Water systems must complete service line inventories
2
Oct 2034
All lead service lines must be replaced

What This Means for You

  • If your home was built before 1986, it may have lead service lines
  • Your water utility is required to inventory and replace lead lines at no cost to you
  • Contact your water utility to check if your address is in their inventory

Source: EPA DWSRF Lead Service Line Replacement Program, FY2025 Allotment Memorandum.

Active Alerts in Florida

0 active weather alerts in Florida. Severe weather can affect your water quality and home safety.

View alerts for Florida →

📊 NWS · Updated March 2026 · View source →
Environmental Hazards (10) HIGH

Flood Risk Profile

774
High Flood Risk
FEMA flood insurance claims filed in 32327
Total Claims Paid
$10
since 1970
Average Claim
$10
per claim
Flood Zone
VE
most common FEMA zone
Recent Claims
10
since 2010

FEMA Flood Zones Explained

  • Zone A / AE — High-risk (100-year floodplain). Flood insurance required for federally backed mortgages
  • Zone V / VE — High-risk coastal area with wave action. Strictest building requirements
  • Zone X — Moderate-to-low risk (500-year floodplain or minimal flood hazard)
  • Zone B / C — Areas of moderate or minimal flood hazard
ⓘ
This ZIP code has a significant flood claim history. Standard homeowner insurance does not cover flood damage. Consider a separate flood insurance policy through the National Flood Insurance Program (NFIP).
📊 FEMA NFIP · Updated March 2026 · View source →

Air Quality for 32327

56
AQI
Moderate
Primary pollutant: PM2.5
Station: Tallahassee (12.5 mi away)
Health Recommendations

Air quality is acceptable. However, there may be a risk for some people, particularly those who are unusually sensitive to air pollution. Consider reducing prolonged outdoor exertion if you experience symptoms.

AQI Scale
050100150200300500
📊 EPA AirNow · Updated March 2026 · View source →

Termite Risk for 32327

Very Heavy Termite Zone
WDI Inspection Requirement

Required for VA/FHA loans statewide; very common in conventional. Formosan and drywood termites prevalent

Typical Inspection Cost
$75 – $200
Based on Florida market rates
Consequence

VA/FHA loan will not close without clear NPMA-33 form; coastal properties may face higher scrutiny

Termite Damage in the U.S.

  • Termites cause an estimated $5 billion in property damage annually in the United States, according to the USDA.
  • Standard termite treatment costs $225–$2,500; fumigation for severe infestations: $2,000–$8,000.
  • Homeowner insurance typically does not cover termite damage, as it is considered preventable.

What Homeowners Should Know

  • Annual termite inspections are recommended in moderate-to-heavy risk zones. Early detection can prevent thousands in repair costs.
  • VA and FHA loans require a clear NPMA-33 (Wood Destroying Insect Inspection Report) for closing in most states.
  • Warning signs: mud tubes on foundation walls, hollow-sounding wood, discarded wings near windows, and frass (droppings) near baseboards.
  • Preventive treatment ($200–$900 per year) is far less expensive than structural damage repair, which averages $3,000 and can exceed $50,000.
  • Florida falls in a very heavy termite infestation probability (TIP) zone. Subterranean termites are the primary concern, with Formosan subterranean termites also present in this region.
Reference: VA lender requirements; NPMA-33 form; FL Statute 482 (Pest Control)

Source: USDA Forest Service Termite Infestation Probability (TIP) zones, VA/FHA lender requirements, Florida pest control regulations. Inspection cost estimates reflect typical market rates and may vary by provider, property size, and location. This information is for general guidance only.

Pest Risk for 32327

High Pest Pressure
Top Pest Threats in Florida

termites, mosquitoes, fire ants, cockroaches and rodents

Typical Pest Inspection Cost
$75 – $200
Based on Florida market rates
Licensed Applicator Required
Yes
Florida pesticide regulations
⚠ CDC / EPA Disease Zone Alerts
  • West Nile activity zone
  • Zika risk area
  • Dengue activity zone
Real Estate Transaction Requirement

Required for VA loans in all states; WDI inspection standard in most conventional sales

Penalty for Unlicensed Application

Up to $10,000 per violation

Why This Matters

  • Health risks: Mosquitoes transmit West Nile virus (1,000+ U.S. cases annually). Ticks spread Lyme disease (estimated 476,000 cases/year per CDC). Rodent droppings can carry hantavirus.
  • Property damage: Carpenter ants and termites cause billions in structural damage annually. Rodents gnaw wiring, creating fire hazards.
  • Food safety: Cockroaches and rodents contaminate food preparation areas and can trigger allergies and asthma, especially in children.
  • Florida's climate creates year-round pest pressure. Regular professional inspections and preventive treatment are strongly recommended.

Common Questions

Do I need a pest inspection before buying a home in Florida?
VA and FHA loans require a Wood Destroying Insect (WDI) inspection in all states. Required for VA loans in all states; WDI inspection standard in most conventional sales Even when not legally required, a professional pest inspection ($75–$200) can reveal hidden infestations that cost thousands to remediate.
Can I apply pesticides myself in Florida?
Homeowners can generally use over-the-counter pesticide products on their own property. However, restricted-use pesticides require a licensed applicator in Florida. Commercial pest control services must be licensed. Up to $10,000 per violation.
What are the most common pests in Florida?
The top pest threats in Florida include termites, mosquitoes, fire ants, cockroaches and rodents. Pest activity varies by season and local conditions. As a high pest pressure state, year-round preventive treatment is recommended.
Legal Reference: Florida Pest Control Act (FL Statutes Chapter 482)

Source: CDC vector-borne disease surveillance, EPA pesticide regulation data, Florida pest control board, NPMA pest prevalence maps. Inspection cost estimates reflect typical market rates and may vary by provider, property size, and location. This information is for general guidance only.

Wildfire & Smoke Risk Profile

33
Moderate Smoke Risk
Wildfire smoke exposure risk score for 32327
Nearest Fire
6 mi
9 km to nearest recent wildfire
County Fires (5yr)
17
wildfires in county since 2021
Risk Level
Moderate
based on fire proximity & history
Air Quality
Seasonal
during fire season (Jun–Nov)
SMOKE RISK SCORE 33/100
0 — Minimal 100 — Highest Risk
ⓘ
This area has moderate wildfire smoke exposure risk. During fire season (June–November), air quality can deteriorate rapidly. Monitor conditions at EPA AirNow and the National Interagency Fire Center.

Wildfire Smoke Safety Tips

  • Air purifier with HEPA filter: run in the room where you spend the most time. Close windows and doors during smoke events.
  • N95 or KN95 masks: standard cloth and surgical masks do not filter fine particulate matter (PM2.5) from wildfire smoke.
  • Seal gaps: use wet towels or tape around doors and windows to reduce smoke infiltration during poor air quality days.
  • Monitor AQI: check AirNow.gov daily during fire season. AQI above 100 = unhealthy for sensitive groups; above 150 = unhealthy for everyone.
  • Create a clean room: designate one room with the air purifier running, keep it sealed, and limit time outdoors when AQI is elevated.

Protect Your Indoor Air from Wildfire Smoke

A HEPA air purifier can reduce indoor PM2.5 by up to 80% during smoke events. Portable units for a single room start at $80. Whole-home solutions start at $300.

Product links may earn a commission — see our disclosure.

📊 NIFC Wildfire Data & EPA AirNow · Updated March 2026 · View source →

Earthquake & Seismic Risk Profile

0.6
VERY LOW RISK
FEMA National Risk Index earthquake score for 32327
Risk Rating
Very Low
FEMA earthquake hazard classification
Expected Annual Loss
$16K
estimated county-level annual loss (Very Low)
Annual Frequency
< 0.001
expected damaging earthquakes per year
Structural Vulnerability
Low
based on housing age (34 yr median) + seismic zone
EARTHQUAKE RISK SCORE 0.6/50
0 — Minimal 50 — Highest Risk

Earthquake Preparedness Tips

  • Secure heavy furniture: anchor bookshelves, water heaters, and large appliances to wall studs. Unsecured items cause most earthquake injuries.
  • Emergency kit: water (1 gallon per person per day for 3 days), non-perishable food, flashlight, batteries, first aid kit, wrench to turn off gas. Keep kits at home and in your car.
  • Know how to shut off gas: locate the gas meter shutoff valve and keep a wrench nearby. Gas leaks are a leading cause of post-earthquake fires.
  • Drop, Cover, Hold On: during shaking, drop to hands and knees, take cover under a sturdy table, and hold on. Do not stand in doorways or run outside.
  • Structural retrofit: homes built before 1980 may need foundation bolting or cripple wall bracing. FEMA's earthquake resources offer guidance on retrofitting.
  • USGS ShakeMap: monitor real-time and recent seismic activity at earthquake.usgs.gov.

Build Your Earthquake Preparedness Kit

FEMA recommends every household in a seismic zone maintain a 72-hour emergency kit. Pre-assembled kits start at $40 and include water, food, first aid, and tools.

Product links may earn a commission — see our disclosure.

📊 FEMA National Risk Index & USGS · Updated March 2026 · View source →

Mold Risk Assessment for 32327

High Risk
68/100
Mold Probability Score
Based on humidity, housing age, flood history & water infrastructure
Avg. Humidity
78%
annual relative humidity
Summer Humidity
80%
Jun–Aug average
Median Home Age
1992
median year built
Flood Claims
774
FEMA insurance claims
Seasonal Risk

Summer months (June–August) present the highest mold risk in 32327, with average humidity reaching 80%. Indoor humidity can be 10–15% higher in poorly ventilated spaces. Winter humidity drops to 76%, reducing but not eliminating risk.

Why Mold Matters

  • The CDC and EPA identify mold as a significant indoor health hazard. Common symptoms include respiratory irritation, allergic reactions, and asthma exacerbation.
  • Mold begins growing within 24–48 hours on damp surfaces when relative humidity exceeds 60%. Bathrooms, basements, and crawl spaces are most vulnerable.
  • Professional mold remediation costs $1,500–$9,000 on average. Homeowner insurance often excludes mold coverage unless caused by a "covered peril."
  • Homes built before 1980 typically lack modern vapor barriers and ventilation systems, increasing moisture infiltration risk.

Prevention Recommendations

  • Use a dehumidifier to keep indoor humidity below 50%. This is especially important in basements, crawl spaces, and bathrooms in high-humidity areas like 32327.
  • Ensure proper ventilation: use exhaust fans in bathrooms and kitchens, and keep attic and crawl space vents unblocked.
  • Fix leaks immediately. Even small plumbing leaks can create mold-favorable conditions within 48 hours.
  • This ZIP has a history of flood insurance claims (774). Previous flooding significantly increases the likelihood of hidden moisture and mold behind walls and under flooring.
  • Monitor indoor humidity with a hygrometer ($10–$20). Target 30–50% year-round.
Recommended: Whole-Home Dehumidifier

With 78% average humidity, a dehumidifier is the most effective way to reduce mold risk in 32327. Energy Star-rated units cost $200–$400 and can reduce humidity by 20–30%.

Compare Dehumidifiers
As an Amazon Associate, ZipCheckup earns from qualifying purchases.
Sources: NOAA Climate Normals 1991–2020 (humidity), U.S. Census ACS (housing age), FEMA NFIP (flood claims), EPA SDWIS (water violations). Score methodology: humidity 40%, housing age 30%, flood history 20%, water infrastructure 10%.

Respiratory Risk Today

High Risk
50
Respiratory Risk Score
Combined air quality, humidity & mold risk for 32327
Air Quality
7/40
EPA AQI index
Humidity
23/30
seasonal impact
Mold
20/30
housing + humidity
RISK SCORE 50/100
Low Moderate Severe
High humidity is the top respiratory concern
A whole-home dehumidifier can reduce indoor humidity to the 30–50% comfort zone, reducing mold growth and dust mite populations.
Sources: EPA AirNow (daily AQI), NOAA humidity normals, mold risk model (housing age + humidity + flood history). Updated daily. Score combines air quality (40%), humidity stress (30%), and mold risk (30%).

Superfund Sites & Soil Contamination Risk

9
Very Low Proximity Risk
EPA Superfund NPL site proximity score for 32327
Nearest NPL Site
28.7 mi
46.2 km — Post and Lumber Preserving Co. Inc.
Sites Within 10 km
0
NPL sites within ~6.2 miles
Risk Level
Very Low
based on proximity & site status
Sites Within 25 km
0
NPL sites within ~15.5 miles
SUPERFUND PROXIMITY SCORE 9/100
0 — No nearby sites 100 — Highest Risk

Nearest Superfund (NPL) Sites

Site Name Distance Status Listed
Post and Lumber Preserving Co. Inc.
Quincy, Florida
 28.7 mi Active Cleanup 08/03/2017

What Are Superfund NPL Sites?

The National Priorities List (NPL) is the EPA's list of the most contaminated sites in the United States. These sites are eligible for federal cleanup funding under CERCLA (the "Superfund" law). Common contaminants include heavy metals, volatile organic compounds (VOCs), pesticides, and industrial solvents that can leach into soil, groundwater, and air.

  • Active Cleanup: EPA is investigating or remediating the site — contamination may still be present.
  • Construction Complete: Physical cleanup is done, but long-term monitoring continues.
  • Deleted: Site meets EPA cleanup standards and has been removed from the NPL.

Know What's in Your Soil

If you live near a Superfund site, a home soil test kit can detect heavy metals, lead, and other contaminants — especially important if you garden, have children, or use well water.

Product links may earn a commission — see our disclosure.

📊 EPA Superfund National Priorities List (NPL) · Updated March 2026 · View source →

Pollution and Population Health

This section places two independent federal datasets side by side: environmental measurements from the EPA and population-health estimates from the CDC. They describe the same ZIP code but are collected separately, and each one is read on its own terms.

Environmental data — EPA

Local pollution measurements

Air, traffic and contaminated-site indicators for this ZIP code, from EPA programs.

Fine particulate matter (PM2.5) Nat. percentile: 30
Diesel exhaust Nat. percentile: 10
Traffic proximity Nat. percentile: 10

Each bar is this ZIP code’s EJScreen national percentile; a higher value means more exposure compared with other U.S. areas.

Air quality (NEI)
Grade B+ · median AQI 41
Toxic-release facilities (TRI)
Facilities reporting to the EPA Toxics Release Inventory: 1 · reporting a carcinogen: 1
Superfund site proximity
Superfund (NPL) sites within 10 km: 0 · nearest about 28.7 mi away
📊 EPA — National Emissions Inventory, EJScreen, Toxics Release Inventory & Superfund (NPL) · Updated 2026 · View source →
AIR EMISSIONS TREND (5-YEAR, EPA AIRDATA)

EPA AirData has insufficient reporting cycles or facilities for Wakulla County, FL — trend display held.

EPA AirData methodology

Two independent datasets. Air and soil pollution data (EPA) and health-prevalence data (CDC) are independent datasets shown side by side for context only. ZipCheckup does not establish a causal link between local pollution and any health condition, and these figures do not demonstrate one.

Health data — CDC

Population-health estimates

CDC PLACES modeled prevalence among adults in this ZIP code, each shown with its 95% confidence interval. The prior-release figure is shown alongside as a reference point only; CDC explicitly cautions that small-area year-to-year differences may reflect model recalibration rather than real change.

Adult asthma
Current (2025 release)
10%
95% CI 8.8–11.3
Prior (2024 release)
9.5% (95% CI 8.4–10.7)
Within model uncertainty
COPD
Current (2025 release)
7.8%
95% CI 7–8.7
Prior (2024 release)
8.5% (95% CI 7.7–9.4)
Within model uncertainty
Cancer
Current (2025 release)
8.9%
95% CI 8.1–9.8
Prior (2024 release)
9% (95% CI 8.2–9.8)
Within model uncertainty

Modeled small-area estimates produced from the BRFSS national survey and census demographics (Zhang et al. 2014). Not direct measurements; not for diagnostic or screening use.

Only CDC PLACES measures present in every release since 2020 appear with a prior-release reference; newer measures (added in 2023 and later) are presented without a prior figure.

CDC PLACES estimates are modeled from the BRFSS national survey and ACS demographics — not direct counts. Year-to-year differences between releases may reflect model recalibration, BRFSS sample-frame changes or census-tract-to-ZIP crosswalk adjustments rather than actual change. Margins of error often exceed annual differences at this geography. Not for diagnostic or screening use.
📊 CDC PLACES — modeled small-area health estimates (current 2025 release, with 2024 prior release shown for reference) · Updated PLACES 2025 · View source →
Food access — USDA

Food access for this area

How the USDA classifies access to grocery stores and fresh food across the surrounding census tract.

USDA access category
Moderate access concern

USDA Food Access Research Atlas tract estimates, mapped from census tract to ZIP code. These are modeled population-level figures, not findings about any individual or any specific address.

📊 USDA — Food Access Research Atlas · Updated FARA 2019 · View source →

Pollution–Health Comparison Index

In 32327, the CDC models adult-asthma prevalence at 10%, while a statistical model of local pollution and poverty predicts about 11.2% — below the model’s prediction.

Below predicted Above predicted

Among U.S. ZIP codes, this one sits at percentile 17 for how far observed asthma is above or below the model’s prediction.

Model fit (R²): 0.1601  how much of the variation in asthma the model accounts for; a lower value means a weaker fit and a less reliable comparison.

The Pollution–Health Comparison Index is a percentile rank showing how this ZIP code’s observed asthma prevalence compares with what a statistical model would predict from local pollution and poverty alone. It describes a statistical association, not a cause-and-effect relationship.

The environmental data (EPA) and health-prevalence data (CDC) in this section are independent datasets presented side by side for general informational purposes. Health figures are CDC PLACES modeled estimates with 95% confidence intervals — statistical models, not diagnoses, and they do not describe any individual. ZipCheckup does not establish a causal link between environmental conditions and health outcomes, and nothing in this section is medical advice. For questions about personal health or local environmental conditions, a licensed clinician or a state or local public-health authority is the right source.

Agricultural pesticide use in the surrounding county

USGS estimates how many kilograms of agricultural pesticides are applied each year in this ZIP code’s surrounding county, plus the five most-applied compounds. These are county-level use estimates, not a measurement of any pesticide in the tap water served to this ZIP code.

USGS county-level estimate
1.6k kg
estimated kilograms of pesticides applied each year across the surrounding county.

Top compounds by volume

The five compounds applied in the largest amounts across this county. Where the EPA sets a drinking-water reference limit (MCL) for a compound, that limit is shown for context — it is a regulatory reference, not a finding of any concentration in this ZIP code’s water.

  • 2,4-D
    Herbicide · 1.1k kg/yr · EPA drinking-water reference limit: 70 ppb
    Moderate water concern
  • DICAMBA
    Herbicide · 243 kg/yr
    Low water concern
  • GLYPHOSATE
    Herbicide · 131 kg/yr · EPA drinking-water reference limit: 700 ppb
    Moderate water concern
  • CHLOROTHALONIL
    Fungicide · 60 kg/yr
    Moderate water concern
  • ATRAZINE
    Herbicide · 24 kg/yr · EPA drinking-water reference limit: 3 ppb
    High water concern

4 of the top compounds are ones the EPA flags for drinking-water monitoring — see the drinking-water section above

What this means

  • These figures describe pesticide application across the surrounding county, not the drinking water at this address.
  • An EPA Maximum Contaminant Level (MCL) is a regulatory reference for how much of a compound is allowed in finished tap water — it is not a finding of contamination at this ZIP code.
  • Tested drinking-water results from the local water system — when reported — appear in the drinking-water section of this report.

Methodology: Annual county pesticide-use estimates are from the USGS Pesticide National Synthesis Project, mapped from county FIPS to ZIP code. EPA Maximum Contaminant Levels are reproduced from federal drinking-water regulations and are reference points only.

Informational only. County-level agricultural pesticide-use estimates are not a measurement of any pesticide in the drinking water served by this ZIP code, nor an assessment of health risk. Tested drinking-water results, when reported by the local water system, appear in the drinking-water section above.

📊 USGS Pesticide National Synthesis Project · Updated May 2026
Home & Infrastructure (7) OK

Home Buyer Risk Report

An inspection-grade snapshot of public-data risk factors for this ZIP, built to help a buyer decide what to verify before closing.

52/100
Home Purchase Risk Score
Moderate Risk

Public federal data shows a moderate risk profile for this ZIP. Several factors below are worth verifying independently before closing.

Seven-factor inspection checklist

Each factor below is scored 0–100 from public federal data. A higher score means the factor is more worth verifying before you buy.

Water quality · 25% of score

The local water system's recent EPA violation and contaminant history, along with an independent tap-water test, gives more context.

Test recommended
Flood · 20% of score

The FEMA flood zone, whether the property has flooded before, and flood-insurance requirements are key points to review.

Test recommended
Lead · 15% of score

Homes built before 1986 may have lead pipes or solder, and pre-1978 homes may have lead paint — a lead inspection adds clarity.

No flag
Energy · 15% of score

Heating and cooling costs and the age of the HVAC system, along with recent utility bills, give a fuller picture.

No flag
Housing age · 10% of score

Older homes more often have aging plumbing, wiring, and a water heater near end of life — a full inspection adds detail.

No flag
Radon · 10% of score

The EPA recommends testing every home for radon; homes in EPA Radon Zone 1 have the highest potential.

No flag
Air quality · 5% of score

Local air-quality history is useful context; for sensitive occupants, an HVAC system with good filtration helps.

No flag

Nearby hazards

Superfund proximity

No EPA Superfund (National Priorities List) sites recorded within 10 km.

ATSDR public-health assessment for nearby sites: No Apparent Public Health Hazard.

85%

Modeled probability of a local water-service disruption in the next 90 days.

See the 90-day disruption outlook

Inspection-day checklist

Practical items to raise with your inspector, agent, or the seller — tailored to this ZIP's data.

  • Get a flood-insurance quote and confirm the FEMA flood zone before making an offer.
  • Review the local water system's recent disruption and violation history with the utility.
  • Hire an independent home inspector for a full walkthrough of the property.
  • Read the seller's disclosure and any past inspection or repair records.
  • Ask for service records for the HVAC system, water heater, and roof.

What this means

  • This report consolidates seven home-purchase risk factors and nearby hazards from public federal data into one place.
  • Each flagged item is a recommendation to verify independently — not a finding of a defect.
  • An independent home inspection remains an essential step before closing.

Methodology: The report combines the home purchase risk score — a seven-factor composite of public federal data — with EPA Superfund, ATSDR, water-disruption, and NRC nuclear-zone proximity datasets. All figures are modeled estimates.

Informational only. This is a modeled summary of public federal data, not a home inspection, an appraisal, or a prediction of defects. Verify any concern with a qualified inspector before a purchase.

📊 EPA, FEMA, U.S. Census, NRC · Updated May 2026

Housing Profile for 32327

Based on U.S. Census data (ACS B25034), there are 11,509 housing units in this ZIP code. The median home was built around 1992, making it roughly 34 years old.

Median Home Age
34
years (built ~1992)
Lead Paint Risk
23%
homes built before 1986
Lead Pipe Risk
1%
homes built before 1950

When Homes Were Built

Pre-1940
1% (87)
1940–1949
0% (16)
1950–1959
3% (365)
1960–1969
3% (384)
1970–1979
7% (850)
1980–1989
14% (1,563)
1990–1999
27% (3,158)
2000–2009
32% (3,682)
2010–2019
11% (1,260)
2020+
1% (144)
Highest risk (pre-1950) Elevated risk (1950–1979) Lower risk (1980+)

What This Means for Home Equipment

Homes from the 1992s are approaching or past their first major equipment replacement cycle:

  • Water heater: estimated ~10 years old — nearing end of life
  • HVAC system: estimated ~0 years old
  • Plumbing: likely Copper

Home Value Context

Median Home Value
$215,500
27% below state median ($295,700)
Est. Safety Remediation
$2,400
1.1% of median home value

Estimated median home value in this ZIP code based on Census ACS data. Safety remediation costs include water filtration, lead abatement, radon mitigation, and flood insurance where applicable.

📊 Census ACS B25034 · Updated March 2026 · View source →

Equipment Age Estimate for 32327

Based on Census data, the median home in this ZIP was built in 1992 (~34 years old).

Lead Pipe Risk
Low
23% homes pre-1986
Electrical Risk
Low
4% homes pre-1970
Water Heater Est. Age
~10 yrs
Avg lifespan: 12 yrs
HVAC Est. Age
~0 yrs
Avg lifespan: 17 yrs

Likely pipe material: Copper

Estimates based on U.S. Census ACS housing vintage data and typical equipment lifespans. Actual conditions vary by home.

Water Infrastructure Risk

26%
Moderate Risk
Estimated pipe failure probability for 32327
State Funding Gap
$505
per resident (20-year need)
Pre-1980 Housing
23%
of homes built before 1980
System Violations
2
EPA violations on record
Lead Indicators
Low
no lead service line indicators

Risk Factor Breakdown

Infrastructure Funding Gap 22%
State drinking water infrastructure need relative to population
Housing Vintage 14%
Proportion of homes with plumbing installed before 1980
Violation History 45%
EPA Safe Drinking Water Act violations and enforcement actions
Lead Exposure Risk 21%
Lead service line probability and lead testing results

What This Means

ZIP code 32327 has some aging water infrastructure. While not at the highest risk level, periodic water testing is a sensible precaution, particularly if your home was built before 1980.

📊 EPA DWINS, Census ACS, EPA SDWIS, LCRR · Updated March 2026 · View source →

Infrastructure Decay & Disruption

51
Low infrastructure stress
Higher modeled infrastructure stress than 47% of US ZIP codes

Water pipe decay

Local water mains have an estimated 7 years of modeled service life remaining.

New 49% of service life consumed End of life
Decay trend
Slow
Likely pipe material
Copper
Estimated system age
34 yrs
Modeled failure probability
26%
estimated annual water-main break likelihood

Bridge condition (FHWA NBI)

Bridges in area
50
Rated in poor condition
12%
FHWA NBI structural rating
Average bridge age
47 yrs
Worst bridge rating
3/9
FHWA NBI scale — 9 is excellent, 0 is failed

Bridge figures are from the Federal Highway Administration's National Bridge Inventory. They describe area-level structural ratings, not the safety of any specific bridge.

Bridge condition — FHWA NBI 2024 annual release

Of 48 bridges classified within this ZIP code's surrounding county, 6 are classified Poor by FHWA NBI 2024.

Good (18) · Fair (24) · Poor (6)

FHWA classifies bridges as Good (rating 7-9), Fair (5-6), or Poor (0-4) based on biennial inspections of deck, superstructure, substructure, and culvert components.

Counts are county-level aggregated; multiple ZIP codes within the same county share these counts. No per-bridge or per-structure-ID claim is made.

Source: FHWA National Bridge Inventory, 2024 annual release.

Gas pipeline incident history

PHMSA records no reported gas-distribution pipeline incidents on file for this area.

Source: U.S. Pipeline and Hazardous Materials Safety Administration (PHMSA) historical incident data.

85%

This is the modeled probability of a boil-water advisory or water-service interruption in the next 90 days.

See the full service-disruption breakdown →

What this means

  • This score blends four public federal datasets — water-pipe decay, bridge condition, gas-pipeline incident history, and a 90-day disruption estimate — into one area-level measure of infrastructure stress.
  • It describes the infrastructure around a home, not the condition of the home itself, and it is a modeled estimate rather than an engineering assessment.
  • Aging water mains raise the chance of breaks and service interruptions; a plumber can inspect a home's own supply line and shut-off valve.

Methodology: Water-pipe decay is modeled with an exponential-decay bathtub curve from Census ACS housing age, EPA ECHO compliance records, and EPA infrastructure-needs data. Bridge condition is from the FHWA National Bridge Inventory; gas-pipeline incidents from PHMSA; the 90-day disruption estimate from EPA and FEMA data. The stress score is a weighted composite of these four signals.

All figures are modeled estimates from public federal data. They are not engineering assessments, predictions of failure, or a judgment about any specific structure or utility.

📊 Census ACS, EPA ECHO, FHWA NBI, PHMSA, FEMA · Updated May 2026

Appliance Age Estimates for 32327

Median home built in 1992 (~34 years old). Appliance ages estimated from typical replacement cycles.

4 appliances likely are near or past typical replacement age.

Water Heater
~10 yrs
Avg lifespan: 12 yrs · $800–$2500
Dishwasher
~10 yrs
Avg lifespan: 12 yrs · $700–$2500
Washing Machine
~10 yrs
Avg lifespan: 12 yrs · $600–$2200
Dryer
~8 yrs
Avg lifespan: 13 yrs · $500–$2000
Refrigerator
~6 yrs
Avg lifespan: 14 yrs · $1000–$4000
Garbage Disposal
~10 yrs
Avg lifespan: 12 yrs · $200–$600

How Water Quality Affects Appliance Lifespan

Water conditions in Crawfordville directly impact how long your appliances last.

Hard Water
Mineral buildup (calcium, magnesium) clogs water heaters, dishwashers, and washing machines. Can reduce lifespan by 25–30%.
Sediment & Particulates
Sand and rust particles accelerate wear on valves, seals, and heating elements in water heaters and dishwashers.
High Chlorine
Corrodes rubber gaskets and seals in washing machines and dishwashers, leading to leaks and premature failure.
Low pH (Acidic Water)
Corrodes metal components inside water heaters and garbage disposals, shortening their service life.

Homes built before 1996 have likely gone through 2+ full appliance replacement cycles. If original appliances remain, they are well past expected lifespan.

Appliance Maintenance FAQ

How often should I flush my water heater?

Flush your tank water heater at least once a year to remove sediment buildup. In areas with hard water, every 6 months is recommended. Sediment reduces heating efficiency and accelerates tank corrosion, shortening lifespan by 2–4 years.

When should I replace my dishwasher vs. repair it?

If your dishwasher is over 9 years old and the repair costs more than 50% of a new unit, replacement is generally more cost-effective. Common signs: dishes not getting clean, water pooling after cycles, or rust spots on the interior.

Does a water softener really extend appliance life?

Yes. A water softener can extend water heater lifespan by up to 30% and reduce dishwasher and washing machine maintenance by preventing mineral scale buildup on heating elements, valves, and spray arms. The Battelle Memorial Institute found that softened water kept water heaters at original factory efficiency over a 15-year period.

Estimates based on U.S. Census housing vintage data and manufacturer-average replacement cycles. Actual appliance age depends on renovation history and maintenance.

Electrical Safety for 32327

Median home built in 1992 (~34 years old).

Electrical Risk Level
Low
4% homes pre-1970
Est. Panel Age
~4 yrs
Avg lifespan: 25–40 yrs

Common Electrical Issues for 1992-Era Homes

  • Aging circuit breakers — breakers can weaken over time and fail to trip during overloads, creating fire hazards
  • Insufficient circuits — homes from this era may lack dedicated circuits for kitchen, bathroom, and laundry areas
  • Missing GFCI/AFCI protection — current code requires GFCI in wet areas and AFCI in bedrooms; older homes often lack both
  • Outdated panel capacity — 100–150 amp panels may be insufficient for modern loads (heat pumps, EV charging, home office)

⚠️ Insurance Compliance Alert

23% of homes in 32327 were built before 1986 — the era when Federal Pacific (FPE StabLok), Zinsco, and Challenger electrical panels were commonly installed.

These panels have a documented 60%+ breaker failure rate and are refused by major insurance companies including State Farm, Allstate, and Citizens (FL).

If you receive an insurance non-renewal notice or 4-point inspection failure:

  • Typical deadline: 30 days to replace panel
  • Replacement cost: $1,500–$4,000
  • Failure to replace: insurance cancellation → mortgage default risk

Insurance blacklist: State Farm, Farmers, Allstate, USAA, Mercury, Citizens (FL), Nationwide.

Florida 4-Point Inspection Requirement

Florida insurance carriers (including Citizens) require a 4-point inspection for homes over 30 years old. This covers: Roof, Electrical, Plumbing, and HVAC.

If an inspector finds FPE, Zinsco, or aluminum wiring, the inspection automatically fails — meaning the insurer can deny coverage.

When to Call an Electrician

Urgent Signs
  • Burning smell from outlets or panel
  • Frequent breaker trips
  • Sparking or discolored outlets
  • Buzzing sounds from wiring or panel
Recommended Inspections
  • Before buying a home (especially pre-1980)
  • After any water damage or flooding
  • Before adding major appliances or EV charger
  • If your panel is 25+ years old

Electrical Safety Tips

Panel & Wiring
  • Never use a fuse with a higher amperage rating than the circuit is designed for
  • Label all breakers clearly in your electrical panel
  • Keep 3 feet of clearance in front of your electrical panel
Around the Home
  • Test GFCI outlets monthly using the built-in test button
  • Replace any cracked or warm outlet covers immediately
  • Do not daisy-chain power strips or extension cords

Homes built before 1996 should have their electrical panel and GFCI protection reviewed, especially if no upgrades have been made.

Electrical Safety Questions for 32327

How do I know if my electrical panel needs an upgrade?

Key signs include: frequent breaker trips, a panel over 25 years old, fuses instead of circuit breakers, visible rust or corrosion, and a panel rated below 200 amps if you have modern appliances, HVAC, or an EV charger. Based on census data, the median home in 32327 was built in 1992 — homes of this age often have panels that don't meet current electrical demands.

How much does an electrical panel upgrade cost?

A panel upgrade from 100 to 200 amps typically costs $1,500–$4,000 depending on your location and the complexity of the work. If the meter base or service entrance also needs replacement, costs can reach $4,000–$6,000. Rewiring a full home (common in pre-1960 homes) ranges from $8,000–$15,000+ depending on size and accessibility.

Is aluminum wiring dangerous?

Aluminum wiring itself is not inherently dangerous, but connections between aluminum wiring and copper devices (outlets, switches) can overheat due to differential thermal expansion. The Consumer Product Safety Commission (CPSC) found that homes with aluminum wiring are 55 times more likely to have fire-hazard conditions. If your home has aluminum wiring, a qualified electrician can install COPALUM or AlumiConn connectors to make connections safe.

Is my home likely to have a Federal Pacific or Zinsco panel?

These panels were installed primarily between 1960 and 1985. Based on census data, 23% of homes in 32327 were built during this era. If your home was built in this period and the panel has never been replaced, there is a meaningful chance it contains an FPE StabLok or Zinsco panel. Look for the brand name on your breaker panel door.

Electrical risk assessment based on U.S. Census ACS housing vintage data. Actual wiring and panel condition varies by home and renovation history.

Septic System Requirements in Florida

ℹ Partial Requirements Apply
Periodic mandatory in BMAP zones; at-sale varies by county

Every 5 years in Basin Management Action Plan (BMAP) areas. At-sale inspection depends on county ordinance.

Typical Inspection Cost
$150 – $500
Based on Florida market rates
Consequence of Non-Compliance

Fines for non-compliance in BMAP zones. County-level enforcement varies.

Legal Reference: Florida Statutes §381.0065; Clean Waterways Act (SB 712, 2020)

What Homeowners Should Know

  • Approximately 1 in 5 U.S. households relies on a septic system for wastewater treatment.
  • Regular pumping every 3–5 years is recommended by the EPA to prevent system failure.
  • A failed septic system can cost $7,000–$15,000 or more to replace, depending on system type and soil conditions.
  • If you are selling a property in Florida, check your state and local requirements before listing.
  • Signs of septic failure include slow drains, sewage odors, and standing water near the drain field.

Source: Florida environmental and health department regulations. Cost estimates reflect typical market rates and may vary by provider, system size, and location. This information is for general guidance only—contact your local health department for requirements specific to your property.

CO & Gas Safety Profile

0
Low Gas Risk
PHMSA gas distribution incident risk score for 32327
County Incidents
0
gas distribution incidents since 2004
Fatalities
0
no deaths reported
Risk Level
Low
based on incident history
RISK SCORE 0/100
0 — Safe 100 — Highest Risk

CO & Gas Safety Tips

  • Install CO detectors on every level of your home and near sleeping areas. Replace batteries annually and units every 5-7 years.
  • Know gas leak signs: rotten egg smell, hissing sounds near gas lines, dead vegetation near pipelines, bubbling in standing water.
  • Annual inspection: have a licensed technician inspect gas appliances (furnace, water heater, stove) every year.
  • Emergency: if you smell gas, leave immediately, do not use electrical switches, and call 911 or your gas company from outside.

Protect Your Home from Carbon Monoxide

The CPSC recommends a CO detector on every level. Battery-operated models start at $20. Smart detectors with app alerts start at $35.

Product link may earn a commission — see our disclosure.

📊 PHMSA Gas Distribution Incidents · Updated March 2026 · View source →

Remodeling Permit Requirements in Florida

⚠ Strict Permit Enforcement
What Requires a Permit

Structural, electrical, plumbing, mechanical, roofing, impact windows. Any work altering building systems requires permit.

Typical Permit Cost
$150 – $4000
Based on Florida fee schedules
Penalty for Non-Compliance

Fines up to $5,000, retroactive permit at double fee, lien on property, criminal penalties for contractors

Legal Reference: Florida Building Code §105.1; FS §553.79

Why This Matters

  • Unpermitted work can reduce your home's appraised value by 10–20% and complicate or block a sale entirely.
  • Homeowner insurance may deny claims for damage caused by or related to unpermitted renovations.
  • Buyers' lenders may require proof of permits before approving a mortgage, especially for kitchens, bathrooms, and structural changes.
  • Unpermitted electrical and plumbing work is a leading cause of house fires and water damage — permits exist to ensure safety inspections.
  • If you are planning remodeling work in Florida, contact your local building department before starting any project that alters structure, electrical, plumbing, or mechanical systems.

Remodeling Permit Questions for 32327

What remodeling work requires a permit in Florida?

In Florida, permits are generally required for any work that alters the structure, electrical wiring, plumbing, or mechanical systems of a home. This includes kitchen and bathroom renovations involving plumbing or electrical changes, wall removal, room additions, window enlargements, re-roofing, and HVAC replacement. Purely cosmetic work — painting, flooring, cabinet refacing without plumbing changes — typically does not require a permit. Always check with your local building department, as municipal requirements may be stricter than state minimums.

What happens if I remodel without a permit in Florida?

Working without a required permit in Florida can result in Fines up to $5,000, retroactive permit at double fee, lien on property, criminal penalties for contractors. Beyond legal penalties, unpermitted work creates problems when selling: buyers' home inspectors and appraisers flag unpermitted additions, lenders may refuse financing, and title companies may require permits to be obtained retroactively — often at 2–3 times the original permit fee. In serious cases, you may be required to open walls for inspection or demolish non-compliant work.

How much does a remodeling permit cost in Florida?

Remodeling permit fees in Florida typically range from $150 to $4000, depending on the scope and value of the project. Most jurisdictions calculate fees as a percentage of the project's estimated construction cost (usually 1–2%) or use a flat fee schedule based on project type. Electrical and plumbing sub-permits may be billed separately. Contact your local building department for an exact fee quote before starting work.

Permit requirements based on Florida building codes and ICC adoption data. Costs reflect typical municipal fee schedules and may vary by jurisdiction, project scope, and valuation. This information is for general guidance only — contact your local building department for requirements specific to your project.

Cost & Community (5) OK

True Cost of Ownership

$3,770
estimated extra annual cost vs a median-risk US ZIP
Higher modeled annual risk-cost than 88% of US ZIP codes

How this ZIP compares

US median ZIP
$1,200
per year
FL median
$4,440
per year

Where the estimate comes from

Flood$2,800
Sea level rise$400
Wildfire$300
Show all 4 factors
Energy-code gap$270

5-year equipment outlook

Major home equipment that may reach the end of its typical service life within five years. Figures are national-average installed-cost ranges, not quotes.

Water heater $800–$2,500
Estimated age ~10 yrs; typical service life 12 yrs
Estimated water heater age is near the end of its typical service life.
Estimated 5-year replacement range $800–$2,500

What this means

  • This is a modeled estimate of how much more — or less — a household here may spend each year on risk-related costs such as insurance, mitigation, testing, and maintenance, compared with a typical US ZIP.
  • It is a comparison figure for context, not a bill, a quote, or financial advice.
  • The 5-year equipment ranges above are separate one-time replacements, not part of the annual figure.

Planning for aging home equipment? — talk to a local expert.

Call (855) 384-4856

This is a free service. You will be connected with an independent service provider. We may receive compensation.

Methodology: Each of 13 risk verticals is assigned a dollar figure from public federal data; the total is the modeled annual difference from a median-risk US ZIP. The 5-year equipment outlook flags major home equipment whose estimated age is within five years of its typical service life; figures are national-average installed-cost ranges.

Estimates are modeled from public federal data. They are not quotes, prices, or financial or insurance advice.

Tax Burden in Florida

State tax rates affect cost of ownership. Here's how Florida compares to national averages.

Income Tax
None
top marginal rate
US avg: 5.3%
Sales Tax
7.0%
combined avg
US avg: 6.6%
Property Tax
0.97%
effective rate
US avg: 0.98%
Sales Tax Breakdown
State rate: 6.00%
Avg local add-on: 1.01%

No state income tax

Source: Tax Foundation 2024. Income tax = top marginal rate. Sales tax = state + avg local. Property tax = effective rate on home value.

Energy Costs in Florida

Residential electricity rate: 15.92¢/kWh — 6% below the national average (national avg: 17.0¢/kWh · EIA, December 2025)

Florida Energy Mix

Solar 9.3% Nuclear 11.4% Gas 72.9% Coal 3.8% Petroleum 0.5%
Renewable energy
9.4%
Clean energy (incl. nuclear)
20.8%

Source: EIA Form 923, 2025 data. Renewable = solar + wind + hydro + geothermal.

📊 EIA + Census ACS · Updated March 2026 · View source →

Electric Utility for 32327

Provider
"Duke Energy Florida
Bundled
Residential Rate
9.7¢/kWh
State avg: 15.9¢/kWh

Source: U.S. Energy Information Administration, Form EIA-861 (2024 data). EIA ID: 6455.

Home Energy Audit for 32327

IRA Energy Incentives Are Time-Limited

The Inflation Reduction Act provides up to $8,000 in rebates and $3,200 in annual tax credits for home energy upgrades — but many provisions phase down or expire after 2032. A professional energy audit is the first step to qualifying for these incentives. Homes in 32327 average ~34 years old, making energy audits especially impactful.

Electricity Rate
9.7¢/kWh
State avg: 15.9¢/kWh (6% below U.S. avg)
Est. Annual Energy Cost
$1,672
based on avg U.S. household (10,500 kWh/yr)
Renewable Energy
9%
of Florida's electricity from renewables
Potential Annual Savings
$167–$418
10–25% savings from energy audit

What a Home Energy Audit Covers

Thermal Envelope
  • Insulation levels in attic, walls, and basement
  • Air leaks around windows, doors, and ducts
  • Blower door test (measures total air leakage)
Equipment & Systems
  • HVAC efficiency and age assessment
  • Water heater type and condition
  • Lighting and appliance energy use
Safety Checks
  • Carbon monoxide and combustion safety
  • Moisture and ventilation assessment
  • Gas leak detection
Deliverables
  • Prioritized list of recommended upgrades
  • Estimated cost and savings for each upgrade
  • Rebate and tax credit eligibility report
Potential Savings from an Energy Audit
  • The average home energy audit identifies $200–$400/year in savings (DOE)
  • Properly sealed and insulated homes save 15% on heating and cooling costs (DOE)
  • Heat pump upgrades can reduce heating costs by 30–50% compared to electric resistance
  • ENERGY STAR certified windows save $101–$583/year compared to single-pane windows
  • Weatherization assistance programs are available for income-qualifying households

Homes in 32327 are ~34 years old on average — older homes typically have the most to gain from an energy audit due to outdated insulation, single-pane windows, and aging HVAC systems.

Your Utility: "Duke Energy Florida

"Duke Energy Florida (Bundled) serves 32327. Your local residential rate is 9.7¢/kWh , which is below the national average — but efficiency upgrades still pay for themselves over time . Many utilities offer additional rebates on top of federal IRA incentives — ask your energy auditor about programs from "Duke Energy Florida.

Federal & State Incentives
IRA Tax Credits (IRC §25C) — up to $3,200/year
$2,000 — Heat pump / heat pump water heater
$1,600 — Insulation & air sealing
$600 — Windows & doors
$150 — Home energy audit itself
IRA Rebates (HEEHRA — income-qualified)
Up to $8,000 — Heat pump installation
Up to $1,600 — Insulation & air sealing
Up to $2,500 — Electrical panel upgrade
Up to $840 — Heat pump clothes dryer
30% tax credit for solar panels — extended through 2032 under the Inflation Reduction Act (IRC §25D). No annual cap for residential solar.

Under the Inflation Reduction Act. Income limits apply for HEEHRA rebates. Tax credits require tax liability. IRS details →

DOE Home Energy Audit Standards

To claim the $150 federal tax credit, your energy audit must meet DOE standards (10 CFR 440.21) and be performed by a qualified auditor. A DOE-compliant audit includes:

  • Blower door test to measure air infiltration
  • Infrared thermography to identify insulation gaps
  • Combustion safety testing for gas appliances
  • Written report with prioritized, cost-effective upgrade recommendations

Energy Audit Questions for 32327

How much does a home energy audit cost?

A professional home energy audit typically costs $150–$400 depending on the size of your home and the depth of testing. The Inflation Reduction Act provides a $150 tax credit for qualifying audits performed by a certified auditor, effectively covering a significant portion of the audit cost. Some utilities also subsidize audits for their customers — check with "Duke Energy Florida for local programs.

What is the difference between an energy audit and a home inspection?

A home inspection (done during a home sale) evaluates structural and safety conditions. An energy audit specifically measures how your home uses energy and identifies efficiency improvements. Energy audits use specialized tools like blower doors, infrared cameras, and duct blasters that are not part of a standard home inspection. The audit produces a prioritized list of upgrades with estimated costs and savings.

How much can I save after an energy audit?

According to the U.S. Department of Energy, the average audit identifies $200–$400/year in savings. Actual savings depend on your home's age, current insulation, HVAC efficiency, and local energy rates. At current rates in Florida, the average home spends approximately $1,672/year on electricity — a 15–25% reduction through audit-recommended upgrades could save $251–$418 annually. With homes in 32327 averaging ~34 years old, there is likely significant potential for improvement.

What rebates and tax credits are available for energy upgrades?

The Inflation Reduction Act (IRA) provides two types of incentives: (1) Tax credits up to $3,200/year for heat pumps ($2,000), insulation ($1,600), windows ($600), and the audit itself ($150); and (2) HEEHRA rebates for income-qualifying households — up to $8,000 for heat pumps, $1,600 for insulation, $2,500 for electrical panels, and $840 for heat pump dryers. Solar panels qualify for a separate 30% tax credit through 2032.

Do I need an energy audit before installing solar panels?

An energy audit is not legally required before installing solar, but the DOE strongly recommends it. Reducing your home's energy consumption before adding solar means you need a smaller (cheaper) system to cover your needs. An audit typically identifies 15–30% in energy reductions through insulation, air sealing, and HVAC improvements — which directly reduces the size and cost of a solar installation.

How long does a home energy audit take?

A comprehensive energy audit takes 2–4 hours for a typical single-family home. The auditor will inspect the attic, basement, walls, windows, HVAC system, water heater, and ductwork. Diagnostic tests (blower door, infrared scan) add precision to the findings. You will receive a written report within 1–2 weeks with prioritized recommendations and estimated costs.

Source: U.S. Energy Information Administration (EIA), U.S. Department of Energy (DOE), Inflation Reduction Act of 2022 (P.L. 117-169).

Safety Updates for Crawfordville, Florida

Violations & Enforcement Timeline

2024-09-18 State Informal Action
2024-09-13 State Informal Enforcement
2024-08-15 State Informal Action
2024-07-15 State Informal Enforcement
2024-05-07 State Informal Action
View all 15 records
2024-05-07 State Order Extension
2024-04-10 State Informal Enforcement
2024-04-01 MCL HAA5 Resolved 61.76 UG/L
2024-04-01 MCL Total Trihalomethanes Resolved 88.6913 UG/L
2024-01-01 MCL Total Trihalomethanes Resolved 87.3513 UG/L
2023-08-08 State Order Extension
2023-07-27 State Order Extension
2021-11-29 State Informal Action
2021-04-01 MCL Operator Certification Resolved
2021-04-01 MCL Total Trihalomethanes Resolved 122 UG/L

National safety news feed →

📊 EPA ECHO · Updated March 2026 · View source →

Recent Product Recalls

Recent CPSC recalls for plumbing and HVAC products that may affect homes in your area.

Superbobi 7 3/8 Inch Pool Drain Covers
Shenzhen Jiangtou Technology Co. · 2026-05-14

Electric Kettles (ENFINIGY 1.5 l and ENFINIGY Pro 1.5 l)
ZWILLING J. A. Henckels Aktiengesellschaft · 2026-05-14

Electric Start Pressure Washers
Generac Power Systems Expands · 2026-05-14

1-K Kerosene Heater Fluid Portable Fuel Containers
Alliance Chemical · 2026-04-30

View all recalls →

📊 CPSC · Updated March 2026 · View source →

Protect Your Home in Crawfordville

Based on local data for ZIP 32327, these services may benefit homeowners in your area.

Based on local data for your area. Use the tools below to explore your options.

Home & Flood Insurance

Crawfordville has 774 FEMA flood claims on record. Standard homeowner policies don't cover flood damage — make sure you're protected.

Typical cost: Flood insurance: typically $700–$1,500/year in flood-prone areas

Check Your Flood Zone (Free)

FEMA flood map lookup — see if your property is in a flood zone

Free tip: Check your FEMA flood zone at msc.fema.gov (free lookup)

Service recommendations are based on public data for this ZIP code (FEMA, Census ACS, NWS). Actual needs vary by property. By calling, your information will be shared with an independent service provider. ZipCheckup may receive compensation. Cost estimates are approximate and vary by property, condition, and contractor.

Take Action

Concerned about these findings? Contact your local elected officials to ask what is being done about water quality in your area.

Email Your Representative

Don't know who to contact? Find your local representative at usa.gov/elected-officials

Frequently Asked Questions

Is the tap water in 32327 safe to drink?

Based on EPA SDWIS data, Crawfordville's primary water system (City of Tallahassee) has 12 recorded violations in the past 5 years, including 3 health-based. Check the full report above for details.

Where does 32327's water come from?

The primary water source for ZIP code 32327 is Groundwater. City of Tallahassee serves approximately 200,480 people.

How can I get my water tested in Crawfordville?

Contact your local water utility (City of Tallahassee) for a free Consumer Confidence Report, or hire a certified lab for independent home water testing. The EPA recommends annual testing if you use a private well.

Is lead a concern in 32327 tap water?

The most recent lead sampling for 32327 recorded 0.003 mg/L. The EPA action level is 0.015 mg/L. This result is below the EPA action level.

What is the radon risk for 32327?

32327 falls in EPA Radon Zone 3 (Low risk), located in Wakulla County. Zone 1 indicates the highest radon potential. Testing your home is recommended regardless of zone.

Are there PFAS (forever chemicals) in 32327's water?

Yes, PFAS contamination has been detected in water systems serving 32327. One or more PFAS compounds exceed EPA maximum contaminant levels. Reverse osmosis and activated carbon filters certified NSF/ANSI 53 or 58 are the most effective at reducing PFAS.

What contaminants were found in ZIP 32327 water?

According to the most recent Consumer Confidence Report, 15 contaminants were detected. The top contaminants include Lead (point of entry) (600 ppb, exceeds MCL), Mercury (100 ppb, exceeds MCL), Uranium (500 ppb, exceeds MCL). See the full water quality breakdown above.

Are there flood risks in ZIP 32327?

Yes. FEMA records show 774 flood insurance claims filed in ZIP code 32327, with the dominant flood zone being VE. This is a significant flood history — consider a separate flood insurance policy through the National Flood Insurance Program.

Nearby ZIP Code Reports

Water quality comparison for ZIP codes near 32327

ZIP Code City, State Distance Grade Violations
32326 Crawfordville, FL 4.1 mi A 12
32355 Saint Marks, FL 7.5 mi C 0
32362 Woodville, FL 8.1 mi B 0
32305 Tallahassee, FL 8.7 mi D 157
32358 Sopchoppy, FL 12.5 mi B 5
32310 Tallahassee, FL 13.0 mi D 157
32346 Panacea, FL 14.2 mi B 8
32307 Tallahassee, FL 15.0 mi D 157
32301 Tallahassee, FL 15.5 mi D 157
32302 Tallahassee, FL 15.9 mi D 157

Contaminants Detected in 32327

Learn more about the contaminants found in your water supply:

Overall safety breakdown

Home Safety Score →

Find the right water filter

Water Filter Matcher →

Compare filters, tests & services

Compare My Options →

Compare with another ZIP

Compare Tool →
Coverage: 16/17 risk factors Data sources →
Get alerts for 32327