Exceeds EPA Limit Copper EXCEEDS EPA LIMIT

Copper in Bird In Hand, PA Drinking Water

Copper data for Bird In Hand, Pennsylvania · 120,000 residents · 1 ZIP code

Not every city shows Copper in its water data; in Bird In Hand, Pennsylvania, federal sampling has confirmed its presence at detectable levels in at least one recent reporting cycle.

0.283 ppb
Max Level Detected
0.28 ppb
Average Level
1.3 mg/L (action level)
EPA action level
Moderate
Health Risk
Reverse Osmosis or NSF 53 Carbon Block
Best Filter Method

Data: EPA SDWIS, CCR Reports, ECHO Last verified: 2026-05-14

Copper in Bird In Hand Tap Water

Copper has been detected in Bird In Hand, Pennsylvania drinking water at a maximum level of 0.283 ppb — below the EPA action level of 1.3 mg/L (action level).

This analysis covers 120,000 residents across 1 ZIP code in Bird In Hand.

Bird In Hand's overall water quality grade is D (53/100).

Is Copper in Bird In Hand Water Safe?

Copper levels in parts of Bird In Hand exceed the EPA action level of 1.3 mg/L (action level). The EPA requires water systems to take corrective action when this limit is exceeded.

If you live in an affected ZIP code, consider installing a reverse osmosis or nsf 53 carbon block filter certified under NSF 53 and testing your water independently.

Copper Levels by ZIP Code

ZIP Code Copper Level EPA Limit Status
17505 0.283 ppm 1.3 mg/L (action level) OK

Average copper level across Bird In Hand: 0.28 ppb

Health Effects of Copper

  • Nausea, vomiting, and diarrhea (short-term, high levels)
  • Liver and kidney damage (long-term)
  • Particularly dangerous for people with Wilson's disease
  • Infants are more sensitive than adults

Health risk severity: Moderate. Governed by the Lead and Copper Rule.

How Copper Gets Into Drinking Water

  • Corrosion of copper household plumbing
  • Acidic (low pH) water accelerates copper leaching
  • New copper pipes leach more than aged ones
  • Mining and industrial discharge (rare for tap water)

What to Do About Copper in Bird In Hand Water

  1. Run water for 30-60 seconds before use (flushes stagnant water)
  2. Install an NSF 53 or NSF 58 certified filter
  3. If pH is low, consider a whole-home acid neutralizer
  4. Test first-draw morning water to check actual copper levels

Look for filters certified under NSF 53 for copper removal.

Related

HomeContaminantsCopperPennsylvania → Bird In Hand
Check your water filter options Free tool — no phone call required.