Monitoring Violations WA

Cedar River Water & Sewer District

EPA ID: WA5341800 · 28,671 people served · 6 ZIP codes

Since the flagged events, Cedar River Water & Sewer District resolved all 4 violations — compliant today, 28,671 residents served.

Data: EPA SDWIS Last verified: 2026-04-02

B · 72
Avg Safety Score
28,671
People Served
6
ZIP Codes Served
4
Violations (5yr)
Surface Water
Water Source
0.0013 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$703K
Median Home Value in Service Area

Service Area Map

Coverage area for Cedar River Water & Sewer District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$125,554
Median Household Income
160,383
Service Area Population
12%
Disadvantaged Population
30th
Poverty Percentile
10th
Energy Burden Percentile
48%
Pre-1986 Housing

The Cedar River Water & Sewer District serves a community with a median household income of $125,554 and an estimated 160,383 residents across its service area. Approximately 48% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Cedar River Water & Sewer District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 2% of homes in King County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

43 yr
Avg Pipe Age
Copper
Pipe Material
27 yr
Est. Remaining Life
Stable
Decay Status
Installed 61% of expected lifespan used End of life

Detected Contaminants

How Cedar River Water & Sewer District compares to EPA limits

Lead 1 mg/L (action level) (EXCEEDS LIMIT)
0 EPA Limit: 0.015 mg/L (action level)
Brain damage in children, kidney & blood pressure in adults

What This Means For You

Lead at 1 mg/L (action level) exceeds the EPA maximum of 0.015 mg/L (action level). Brain damage in children, kidney & blood pressure in adults. Consider reverse osmosis filtration.

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 19 detections recorded. 3 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.01 ppt, PFOS: 0.015 ppt, PFHxS: 0.065 ppt, PFBS: 0.345 ppt, HFPO-DA: 0.024 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Lead was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Washington

B 2 violations
City of Port Angeles
28,946 people
A 6 violations
B 11 violations
A 2 violations
B 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,080
PFAS Treatment $460
Total Estimated Cost $1,540

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,540 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

CEDAR RIVER WATER & SEWER DISTRICT (EPA ID: WA5341800) is a community water system in Washington that serves approximately 28,671 people from surface water sources.

This system provides water to 6 ZIP codes across 6 communities.

Average Home Safety Score: B (72/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
August 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
May 1, 2025 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 2 No
Lead Inorganic 1 No
Stage 1 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
98038 0.0013 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Cedar River Water & Sewer District (WA5341800) on EPA.gov.

Frequently Asked Questions

Is Cedar River Water & Sewer District water safe to drink?

Cedar River Water & Sewer District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Cedar River Water & Sewer District serve?

Cedar River Water & Sewer District serves approximately 28,671 people across 6 ZIP codes in Washington.

Where does Cedar River Water & Sewer District get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
425-255-6370
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Cedar River Water & Sewer District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Blended (groundwater + surface water)
Combines water from both groundwater and surface sources.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinefluoridecalcium oxide

Source: Cedar River Water & Sewer District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Advanced
Advanced treatment that may include ozonation, ultraviolet disinfection, activated-carbon filtration, or membrane filtration. Used when source water has elevated contamination risk or to remove disinfection byproducts.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
calcium oxide

Treatment classification and chemical list sourced from Cedar River Water & Sewer District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
174
Detections
1
Latest sample
3/7/2024
Highest analyte
PFBA: 12.2 ppt
Analyte Max detected Current MCL Status
PFBA 12.2 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFOA
Perfluorooctanoic acid
EPA-regulated (2024 NPDWR)
0 ppt 4 ppt Below EPA limit
PFOS
Perfluorooctanesulfonic acid
EPA-regulated (2024 NPDWR)
0 ppt 4 ppt Below EPA limit
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
0 ppt 10 ppt Below EPA limit
PFNA
Perfluorononanoic acid
EPA-regulated (2024 NPDWR)
0 ppt 10 ppt Below EPA limit
PFBS
Perfluorobutanesulfonic acid
EPA-regulated (2024 NPDWR)
Component of EPA Hazard Index — combined exposure assessed against unitless threshold of 1.0.
0 ppt 2000 ppt Below EPA limit

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Cedar River Water & Sewer District.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
8,208
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 28,671
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
8.2
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.7 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm

Aesthetic measurements from Cedar River Water & Sewer District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from Cedar River Water & Sewer District Consumer Confidence Report:
  • Intermittent use of inter-tie with Covington Water District (CWD) and Tacoma water for customers in the southeast area.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Cedar River Water & Sewer District safe to drink?
Cedar River Water & Sewer District earns a B safety grade with 4 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Cedar River Water & Sewer District's water?
Detected contaminants include Lead, Consumer Confidence Report Rule, Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Cedar River Water & Sewer District serve?
Cedar River Water & Sewer District serves approximately 28,671 people with drinking water across 6 ZIP codes.
What is Cedar River Water & Sewer District's water source?
Cedar River Water & Sewer District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Cedar River Water & Sewer District's water?
The maximum detected lead level is 0.0013 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Cedar River Water & Sewer District's service area?
The Cedar River Water & Sewer District service area has a median household income of $125,554. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Cedar River Water & Sewer District get its water?
Cedar River Water & Sewer District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Cedar River Water & Sewer District (EPA ID: WA5341800) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Washington Cedar River Water & Sewer District

Get safety alerts for Cedar River Water & Sewer District, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.