Health Violations Found VA 3 HEALTH VIOLATIONS

City of Danville,

EPA ID: VA5590100 · 43,055 people served · 9 ZIP codes

In the five-year tracking period, City of Danville, filed 22 violations — each has been cleared, and the utility now meets all federal standards for its 43,055 residents.

Data: EPA SDWIS Last verified: 2026-04-02

D · 52
Avg Safety Score
43,055
People Served
9
ZIP Codes Served
22
Violations (5yr)
Surface Water
Water Source
0.0017 mg/L
Max Lead Level
Zone 1
Radon Risk · High
6
Contaminants Flagged
$146K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 9 (2022) to 18 (2023). Violation counts have remained relatively steady.

Service Area Map

Coverage area for City of Danville, Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$51,761
Median Household Income
71,415
Service Area Population
68%
Disadvantaged Population
73th
Poverty Percentile
90th
Energy Burden Percentile
61%
Pre-1986 Housing

The City of Danville, serves a community with a median household income of $51,761 and an estimated 71,415 residents across its service area. Approximately 61% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 68% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

City of Danville,'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
42th
Wastewater Discharge Proximity
57th
Superfund Site Proximity

About 1% of homes in Pittsylvania County, Virginia rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

45 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 66% of expected lifespan used End of life

Detected Contaminants

How City of Danville, compares to EPA limits

Arsenic 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.01 mg/L
Haloacetic Acids (HAA5) 3 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Arsenic at 1 mg/L exceeds the EPA maximum of 0.01 mg/L.

Haloacetic Acids (HAA5) at 3 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Consumer Confidence Report Rule at 13 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded. 3 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 0.14 ppt, HFPO-DA: 0.08 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Virginia

City of Manassas
42,696 people
C 2 violations
Frederick Water
46,206 people
C 3 violations
Fort Belvoir
39,303 people
C 0 violations
D 0 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance Water Filtration PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $878
Water Filtration $267
PFAS Treatment $200
Total Estimated Cost $2,544

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$7,665
10 years
$15,330
20 years
$30,660

Compare: Estimated remediation cost is $2,544 (one-time) vs. $15,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

DANVILLE, CITY OF (EPA ID: VA5590100) is a community water system in Virginia that serves approximately 43,055 people from surface water sources.

This system provides water to 9 ZIP codes across 6 communities.

Average Home Safety Score: D (52/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 health-based violations recorded in the past 5 years. All violations have been resolved.

Recent Violations

Date Contaminant Type Status
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
April 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved
January 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 13 No
Haloacetic Acids (HAA5) Disinfection Byproducts 3 Yes
Surface Water Treatment Rule Treatment Failure 2 No
Lead and Copper Rule Treatment Failure 2 No
Arsenic Inorganic 1 No
Stage 1 DBP Rule Treatment Failure 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
24540 0.0017 mg/L No N/A
24541 0.0017 mg/L No N/A
24543 0.0017 mg/L No N/A
24544 0.0017 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 7 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Danville, (VA5590100) on EPA.gov.

Frequently Asked Questions

Is City of Danville, water safe to drink?

City of Danville, has recorded 3 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does City of Danville, serve?

City of Danville, serves approximately 43,055 people across 9 ZIP codes in Virginia.

Where does City of Danville, get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
434-799-6473
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from City of Danville Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinefluoride

Source: City of Danville Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Danville Consumer Confidence Report:
The Dan River was determined to be 'highly susceptible' to contamination using the criteria developed by the State in its approved Source Water Assessment Program.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

AgricultureIndustrial activityUrban stormwater runoffSewage treatment plantsSeptic systemsOil and gas productionMining

Treatment classification and chemical list sourced from City of Danville Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
1
Latest sample
9/8/2025
Highest analyte
PFOA: 9.1 ppt
Analyte Max detected Current MCL Status
PFOA 9.1 ppt 10 ppt Above 2029 federal MCL

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead service line replacement plan from City of Danville Consumer Confidence Report:
All water service lines, public and private, that are found to contain lead service line material will be required to be replaced by November 2037, according to the EPA mandate.

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Danville

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

121
Confirmed Lead
0
Galvanized — Replacement Required
18,327
Unknown Material
2,753
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 43,055
Reported to Virginia

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.15
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.55 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
26 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.

Aesthetic measurements from City of Danville Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from City of Danville Consumer Confidence Report:
  • The city was required to complete a lead service line inventory of the water line material providing service to homes and business.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from City of Danville, safe to drink?
City of Danville, has a D safety grade based on 22 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in City of Danville,'s water?
Detected contaminants include Arsenic, Haloacetic Acids (HAA5), Consumer Confidence Report Rule, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Danville, serve?
City of Danville, serves approximately 43,055 people with drinking water across 9 ZIP codes.
What is City of Danville,'s water source?
City of Danville, draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Danville,'s water?
The maximum detected lead level is 0.0017 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Danville,'s service area?
The City of Danville, service area has a median household income of $51,761. EPA EJScreen data classifies 68% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Danville, get its water?
City of Danville,'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Danville, (EPA ID: VA5590100) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Virginia City of Danville,

Get safety alerts for City of Danville,, Virginia

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.