City of Haltom City
EPA ID: TX2200014 · 46,260 people served · 5 ZIP codes
Five years of EPA monitoring have produced no violations for City of Haltom City — the supplier serving 46,260 residents has kept every contaminant level within federal limits, a result that places it among the top-performing utilities for systems with a service population of comparable size.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Haltom City Source: EPA SDWIS service area boundaries.
Service area boundary — Grade A
Service Area Demographics
The City of Haltom City serves a community with a median household income of $78,688 and an estimated 173,801 residents across its service area. Approximately 61% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 31% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
City of Haltom City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Tarrant County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 33 detections recorded. 11 exceed federal EPA limits (4 ppt for PFOA/PFOS).
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Haltom City (EPA ID: TX2200014) is a community water system in Texas that serves approximately 46,260 people from surface water sources.
This system provides water to 5 ZIP codes across 3 communities.
Average Home Safety Score: A (85/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 76117 | 0.002 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
- 76111 — Fort Worth
- 76117 — Haltom City
- 76137 — Fort Worth
- 76148 — Fort Worth
- 76180 — North Richland Hills
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Haltom City (TX2200014) on EPA.gov.
Frequently Asked Questions
Is City of Haltom City water safe to drink?
Based on EPA records, City of Haltom City has no recorded violations in the past 5 years — a positive indicator of water quality management.
How many people does City of Haltom City serve?
City of Haltom City serves approximately 46,260 people across 5 ZIP codes in Texas.
Where does City of Haltom City get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Above Current MCL
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS compounds were measured above the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.