Health Violations Found TX 2 HEALTH VIOLATIONS

Benton City Water Supply Corporation

EPA ID: TX1630034 · 20,940 people served · 12 ZIP codes

Based on the latest federal compliance data, Benton City Water Supply Corporation has 5 violations that the EPA has not yet closed — those outstanding findings are part of the enforcement record for a utility that delivers water to approximately 20,940 people throughout its service territory.

Data: EPA SDWIS Last verified: 2026-04-02

A · 89
Avg Safety Score
20,940
People Served
12
ZIP Codes Served
16
Violations (5yr)
Groundwater
Water Source
0.002 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
7
Contaminants Flagged
$143K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 9 (2021) to 5 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Benton City Water Supply Corporation Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$67,180
Median Household Income
87,962
Service Area Population
72%
Disadvantaged Population
63th
Poverty Percentile
48th
Energy Burden Percentile
41%
Pre-1986 Housing

The Benton City Water Supply Corporation serves a community with a median household income of $67,180 and an estimated 87,962 residents across its service area. Approximately 41% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 72% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Benton City Water Supply Corporation's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
32th
Superfund Site Proximity

About 2% of homes in Frio County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

37 yr
Avg Pipe Age
Copper
Pipe Material
33 yr
Est. Remaining Life
Stable
Decay Status
Installed 53% of expected lifespan used End of life

Detected Contaminants

How Benton City Water Supply Corporation compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 7 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 2 presence exceeds the EPA maximum of presence.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 12 detections recorded.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Texas

City of Alamo
21,065 people
B 4 violations
B 21 violations
B 0 violations
0 violations
Windermere Community
21,231 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Water Filtration
Flood Insurance $1,140
PFAS Treatment $250
Water Filtration $120
Total Estimated Cost $1,510

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$7,665
10 years
$15,330
20 years
$30,660

Compare: Estimated remediation cost is $1,510 (one-time) vs. $15,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Benton City Water Supply Corporation (EPA ID: TX1630034) is a community water system in Texas that serves approximately 20,940 people from groundwater sources.

This system provides water to 12 ZIP codes across 12 communities.

Average Home Safety Score: A (89/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. 5 remain unresolved.

Recent Violations

Date Contaminant Type Status
September 29, 2025 Stage 1 DBP Rule Monitoring Unresolved
July 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
May 1, 2025 Lead and Copper Rule Monitoring Unresolved
April 1, 2025 Revised Total Coliform Rule Monitoring Unresolved
March 16, 2025 Lead and Copper Rule Monitoring Resolved
March 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
January 18, 2025 Consumer Confidence Report Rule Health-based Resolved
January 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
September 29, 2024 Stage 1 DBP Rule Monitoring Resolved
July 2, 2024 Surface Water Treatment Rule Monitoring Resolved
January 1, 2024 Contaminant 2047 Monitoring Unresolved
January 1, 2024 Stage 1 DBP Rule Monitoring Resolved
December 30, 2023 Stage 1 DBP Rule Monitoring Resolved
July 1, 2023 Revised Total Coliform Rule Monitoring Unresolved
January 1, 2023 Stage 1 DBP Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 7 No
Consumer Confidence Report Rule Reporting Failure 3 Yes
Stage 2 DBP Rule Treatment Failure 2 Yes
Lead and Copper Rule Treatment Failure 2 No
Revised Total Coliform Rule Microbiological 2 No
Contaminant 2047 Other Violation 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
78011 0.002 mg/L No N/A
78061 0.001 mg/L No N/A
78052 0.0007 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Benton City Water Supply Corporation (TX1630034) on EPA.gov.

Frequently Asked Questions

Is Benton City Water Supply Corporation water safe to drink?

Benton City Water Supply Corporation has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Benton City Water Supply Corporation serve?

Benton City Water Supply Corporation serves approximately 20,940 people across 12 ZIP codes in Texas.

Where does Benton City Water Supply Corporation get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(830) 709-3254
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
980 FM 3175, Lytle, TX 78052

Contact information from Benton City Water Supply Corporation Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
Chlorine

Source: Benton City Water Supply Corporation Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Benton City Water Supply Corporation Consumer Confidence Report:
TCEQ completed source water assessment. Some sources are susceptible to certain contaminants. Sampling requirements based on susceptibility and previous sample data. Any detections reported in CCR. Contact Maria F. Vela at (830) 709-3254 for details.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
Chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

MicrobialInorganicPesticides/herbicidesOrganic chemicalsRadioactive contaminants

Treatment classification and chemical list sourced from Benton City Water Supply Corporation Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
232

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
8,135
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 20,940
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Benton City Water Supply Corporation safe to drink?
Benton City Water Supply Corporation earns a A safety grade with 16 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Benton City Water Supply Corporation's water?
Detected contaminants include Stage 1 DBP Rule, Consumer Confidence Report Rule, Stage 2 DBP Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Benton City Water Supply Corporation serve?
Benton City Water Supply Corporation serves approximately 20,940 people with drinking water across 12 ZIP codes.
What is Benton City Water Supply Corporation's water source?
Benton City Water Supply Corporation draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Benton City Water Supply Corporation's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Benton City Water Supply Corporation's service area?
The Benton City Water Supply Corporation service area has a median household income of $67,180. EPA EJScreen data classifies 72% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Benton City Water Supply Corporation get its water?
Benton City Water Supply Corporation's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Benton City Water Supply Corporation (EPA ID: TX1630034) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas Benton City Water Supply Corporation

Get safety alerts for Benton City Water Supply Corporation, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.