Current Noncompliance TX

Horizon Regional Municipal Utility District

EPA ID: TX0710005 ยท 31,542 people served ยท 2 ZIP codes

ZipCheckup's reading of EPA SDWIS for Horizon Regional Municipal Utility District (TX0710005): 1 unresolved EPA violation on record. Current EPA status: Horizon Regional Municipal Utility District, 1 open violation, 31,542 people served.

Data: EPA SDWIS

B ยท 84
Avg Safety Score
31,542
People Served
2
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.000708 mg/L
Max Lead Level
Zone 3
Radon Risk ยท Low
1
Contaminants Flagged
$194K
Median Home Value in Service Area

Service Area Map

Coverage area for Horizon Regional Municipal Utility District Source: EPA SDWIS service area boundaries.

Service area boundary - Grade B

Service Area Demographics

$74,753
Median Household Income
180,643
Service Area Population
69%
Disadvantaged Population
60th
Poverty Percentile
40th
Energy Burden Percentile
9%
Pre-1986 Housing

The Horizon Regional Municipal Utility District serves a community with a median household income of $74,753 and an estimated 180,643 residents across its service area.

Environmental Justice Note: 69% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

๐Ÿ’ง Where Does Your Water Come From?

Groundwater

Horizon Regional Municipal Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

Infrastructure Risk

24 yr
Avg Pipe Age
PEX or Copper
Pipe Material
41 yr
Est. Remaining Life
Stable
Decay Status
Installed 37% of expected lifespan used End of life

Detected Contaminants

How Horizon Regional Municipal Utility District compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 10 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Texas

City of Southlake
31,576 people
B 1 violation
1 violation
City of Palestine
31,272 people
8 violations
A 0 violations
City of Sachse
30,630 people
A 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $600
PFAS Treatment $550
Total Estimated Cost $1,150

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,150 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Horizon Regional Municipal Utility District (EPA ID: TX0710005) is a community water system in Texas that serves approximately 31,542 people from groundwater sources.

This system provides water to 2 ZIP codes across 1 community.

ZIP-Area Home Safety Context: B (84/100)

This is the average Home Safety Score for 1 of 2 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.

Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.

Violation History

1 current noncompliance record in the accepted 2026Q2 snapshot; none are classified as health-based in this evidence.

Status breakdown for accepted records with record years 2021-2026: 0 resolved, 0 archived, 0 addressed, and 1 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 1, 2024 Surface Water Treatment Rule Non-health-based Unaddressed (current)

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.000708 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Horizon Regional Municipal Utility District (TX0710005) on EPA.gov.

Frequently Asked Questions

Is Horizon Regional Municipal Utility District water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 1 current noncompliance record and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.

How many people does Horizon Regional Municipal Utility District serve?

Horizon Regional Municipal Utility District serves approximately 31,542 people across 2 ZIP codes in Texas.

Where does Horizon Regional Municipal Utility District get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

Is water from Horizon Regional Municipal Utility District safe to drink?
Horizon Regional Municipal Utility District earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Horizon Regional Municipal Utility District's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Horizon Regional Municipal Utility District serve?
Horizon Regional Municipal Utility District serves approximately 31,542 people with drinking water across 2 ZIP codes.
What is Horizon Regional Municipal Utility District's water source?
Horizon Regional Municipal Utility District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Horizon Regional Municipal Utility District's water?
The maximum detected lead level is 0.000708 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Horizon Regional Municipal Utility District's service area?
The Horizon Regional Municipal Utility District service area has a median household income of $74,753. EPA EJScreen data classifies 69% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Horizon Regional Municipal Utility District get its water?
Horizon Regional Municipal Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on the exported violation history and environmental factors, the source contamination risk is classified as elevated.

How to cite this page

APA ZipCheckup. (n.d.). Horizon Regional Municipal Utility District: 1 EPA Violation. https://zipcheckup.com/water-system/tx0710005/
BibTeX
@misc{zipcheckup-water-system-tx0710005,
  author = {{ZipCheckup}},
  title  = {{Horizon Regional Municipal Utility District: 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx0710005/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Horizon Regional Municipal Utility District (EPA ID: TX0710005) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas Horizon Regional Municipal Utility District

Get safety alerts for Horizon Regional Municipal Utility District, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.