Historical Compliance Records TX

Bridgestone Municipal Utility District

EPA ID: TX1011550 ยท 24,528 people served ยท 1 ZIP code

ZipCheckup's reading of EPA records for Bridgestone Municipal Utility District (TX1011550): 1 violation on record since 2021. 1 violation on file at Bridgestone Municipal Utility District, none open; 24,528 people served.

Data: EPA SDWIS

24,528
People Served
1
ZIP Code Served
1
Violations (since 2021)
Surface Water
Water Source
Below the reporting limit
Most recent lead 90th percentile on record (monitoring period ending 2023-12-31)
1
Contaminants Flagged
$265K
Median Home Value in ZIP Codes Served

Service Area Map

Coverage area for Bridgestone Municipal Utility District Source: EPA SDWIS service area boundaries.

Service area boundary

Demographics of ZIP Codes Served

$101,588
Median Household Income
52,910
Population of ZIP Codes Served (Census)
51%
Disadvantaged Population
50th
Poverty Percentile
40th
Energy Burden Percentile
32%
Pre-1986 Housing

The ZIP codes associated with Bridgestone Municipal Utility District have a median household income of $101,588 and about 52,910 residents live in those ZIP codes (Census; not the number of people this system supplies).

Environmental Justice Note: On average, 51% of census tracts in the counties mapped to this service area are designated disadvantaged by the federal Climate and Economic Justice Screening Tool (CEJST, 2022 version). Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Bridgestone Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
60th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

36 yr
Estimated pipe age (modeled from housing age)
Copper
Likely pipe material (modeled)
34 yr
Est. Remaining Life
Stable
Decay Status
Installed 51% of expected lifespan used (estimate) End of life

PFAS in ZIP Codes This System Serves

PFAS ("forever chemicals") have been reported in samples from water systems associated with the ZIP codes in this system's area. These results can come from other water systems serving the same ZIP codes; check the UCMR5 section for any results reported for this system. 10 detections recorded. 3 detections are above the level of a federal PFAS MCL (4 ppt for PFOA and PFOS), with compliance required from 2029.

Health concern: Exposure to certain PFAS has been associated with some cancers and with immune and developmental effects; effects differ by compound. Many PFAS break down very slowly in the environment.
Recommended filter: An activated carbon filter certified under NSF/ANSI 53 or a reverse osmosis system certified under NSF/ANSI 58 for the PFAS listed in its certification. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Texas

2 violations
3 violations
City of Royse City
24,313 people
C 10 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

PFAS Treatment Water Filtration
PFAS Treatment $600
Water Filtration $300
Total Estimated Cost $900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

Illustrative per-household cost scenario based on stated assumptions:

Estimated Healthcare Costs $500

Annual per household (ZipCheckup estimate)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $900 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Individual costs vary by household size, property, and health factors. These estimates are for awareness, not financial advice.

System Overview

Bridgestone Municipal Utility District (EPA ID: TX1011550) is a community water system in Texas that serves approximately 24,528 people from surface water sources.

This system serves ZIP code 77388 in Spring.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 1 record in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 2, 2024 Consumer Confidence Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Rule Other (notice or report rule) 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
Below the reporting limit No 2023-12-31

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Ask your water utility whether running cold water for 2 minutes is enough to flush your plumbing before drinking.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for Bridgestone Municipal Utility District (TX1011550) on EPA.gov.

Frequently Asked Questions

Is Bridgestone Municipal Utility District water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Bridgestone Municipal Utility District; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Bridgestone Municipal Utility District serve?

Bridgestone Municipal Utility District serves approximately 24,528 people across 1 ZIP code in Texas.

Where does Bridgestone Municipal Utility District get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected; the table compares each one with the EPA MCL where one exists (April 2024 rule, compliance required from 2029) and with this state's enforceable standard where one exists.

Samples collected
348
Detections
1
Latest sample
4/25/2024
Highest analyte
PFPeA: 3 ppt
Analyte Max detected EPA MCL (compliance required from 2029) Status
PFPeA 3 ppt No federal MCL โ€”

EPA's April 2024 PFAS rule sets MCLs of 4 ppt for PFOA and PFOS and 10 ppt for PFHxS, PFNA and HFPO-DA (GenX); water systems must comply from 2029. Other PFAS compounds have no individual federal MCL. A state standard is shown only where this system's state has its own enforceable PFAS limit. Detection results are EPA UCMR5 samples, not a measurement at your tap.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

Should I use a water filter? ▼
Given 1 recorded violation, review the violation types and dates; a filter certified for a specific contaminant of concern can reduce that contaminant at the tap. Monitoring or reporting violations are not something a filter addresses.
How many people does Bridgestone Municipal Utility District serve? ▼
Bridgestone Municipal Utility District serves approximately 24,528 people with drinking water across 1 ZIP code.
What is Bridgestone Municipal Utility District's water source? ▼
Bridgestone Municipal Utility District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bridgestone Municipal Utility District's water? ▼
The reported 90th-percentile lead result is below the laboratory reporting limit, not a measured zero; EPA's health goal for lead is zero. This is at or below the EPA lead action level, which triggers system action and is not a safe level; the EPA health goal for lead is zero.
What is the demographic profile of the ZIP codes associated with Bridgestone Municipal Utility District? ▼
The ZIP codes mapped to Bridgestone Municipal Utility District have a median household income of $101,588 (Census ZIP-code estimate). In CEJST data, 51% of census tracts in the counties mapped to this area are designated disadvantaged (average across mapped ZIP codes), which may indicate greater vulnerability to environmental health risks.
Where does Bridgestone Municipal Utility District get its water? ▼
Bridgestone Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on the available data, the modeled source-contamination category is moderate; test local water to assess actual exposure.

How to cite this page

APA ZipCheckup. (n.d.). Bridgestone Municipal Utility District (TX): 1 EPA Violation. https://zipcheckup.com/water-system/tx1011550/
BibTeX
@misc{zipcheckup-water-system-tx1011550,
  author = {{ZipCheckup}},
  title  = {{Bridgestone Municipal Utility District (TX): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx1011550/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Bridgestone Municipal Utility District (EPA ID: TX1011550) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home › Water Systems › Texas › Bridgestone Municipal Utility District

Get safety alerts for Bridgestone Municipal Utility District, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.