City of Royse City
EPA ID: TX1990002 · 16,400 people served · 3 ZIP codes
With 1 unresolved EPA violation, City of Royse City is currently out of full compliance — approximately 16,400 people in its service area.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Royse City Source: EPA SDWIS service area boundaries.
Service area boundary — Grade A
Service Area Demographics
The City of Royse City serves a community with a median household income of $128,590 and an estimated 92,813 residents across its service area.
🌊 Where Does Your Water Come From?
City of Royse City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Rockwall County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How City of Royse City compares to EPA limits
What This Means For You
Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 15 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Royse City (EPA ID: TX1990002) is a community water system in Texas that serves approximately 16,400 people from surface water sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: A (89/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| May 15, 2025 | Lead and Copper Rule | Monitoring | Unresolved |
| December 1, 2024 | Lead and Copper Rule | Monitoring | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Monitoring | Resolved |
| September 29, 2024 | Stage 1 DBP Rule | Monitoring | Resolved |
| October 1, 2023 | Stage 1 DBP Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Stage 1 DBP Rule | Treatment Failure | 2 | No |
| Stage 2 DBP Rule | Treatment Failure | 2 | Yes |
| Lead and Copper Rule | Treatment Failure | 2 | No |
| Revised Total Coliform Rule | Microbiological | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 75189 | 0.00102 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Royse City (TX1990002) on EPA.gov.
Frequently Asked Questions
Is City of Royse City water safe to drink?
City of Royse City has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does City of Royse City serve?
City of Royse City serves approximately 16,400 people across 3 ZIP codes in Texas.
Where does City of Royse City get its water?
The primary water source is surface water.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from CITY OF ROYSE CITY Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: CITY OF ROYSE CITY Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Treatment classification and chemical list sourced from CITY OF ROYSE CITY Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Aesthetic water quality
These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.
Aesthetic measurements from CITY OF ROYSE CITY Consumer Confidence Report.
Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.
Hard water detected in CITY OF ROYSE CITY
Your utility reported water hardness of 202 ppm CaCO₃ (11.8 grains per gallon) in its most recent Consumer Confidence Report. This is in the hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.
There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.
Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.
Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Federal compliance violations on record
These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).
-
monitoring2023-10-01/2024-05-22
We failed to test our drinking water for the contaminant and period indicated. Subsequent testing has been completed with all metrics within the required range.
-
reporting · Lead2024-09-29/2024-11-07
We failed to provide the results of lead tap water monitoring to the consumers at the location water was tested. Results were provided, however we did not meet the 30 day deadline.
-
public notice2024-12-01/2024-12-31
We failed to adequately notify you within the required timeframe of the violation above.
Violations record from CITY OF ROYSE CITY Consumer Confidence Report.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Royse City (EPA ID: TX1990002) — request the latest Consumer Confidence Report or ask about specific contaminants.