Monitoring Violations PA

Gettysburg Muni Authority

EPA ID: PA7010019 · 12,425 people served · 3 ZIP codes

Although 13 violations appeared on Gettysburg Muni Authority's record, all have been remedied — currently compliant, 12,425 served.

Data: EPA SDWIS Last verified: 2026-04-02

D · 47
Avg Safety Score
12,425
People Served
3
ZIP Codes Served
13
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 1
Radon Risk · High
6
Contaminants Flagged
$257K
Median Home Value in Service Area

Service Area Map

Coverage area for Gettysburg Muni Authority Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$79,164
Median Household Income
43,076
Service Area Population
0%
Disadvantaged Population
40th
Poverty Percentile
60th
Energy Burden Percentile
56%
Pre-1986 Housing

The Gettysburg Muni Authority serves a community with a median household income of $79,164 and an estimated 43,076 residents across its service area. Approximately 56% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Gettysburg Muni Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 1% of homes in Adams County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Stable
Decay Status
Installed 67% of expected lifespan used End of life

Detected Contaminants

How Gettysburg Muni Authority compares to EPA limits

Copper 1 mg/L (77% of limit)
0 EPA Limit: 1.3 mg/L

What This Means For You

Contaminant 0700 at 8 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

E. coli at 1 Zero tolerance (any positive sample triggers immediate action) exceeds the EPA maximum of Zero tolerance (any positive sample triggers immediate action). Severe GI illness; potentially fatal kidney failure in children. Consider UV disinfection (99.99%) filtration.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 11 detections recorded. 4 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.014 ppt, PFOS: 0.018 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

E. coli was detected in this water system. UV disinfection (99.99%) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Pennsylvania

0 violations
D 11 violations
D 0 violations
Quakertown Boro
12,800 people
D 22 violations
Paw Huntsville
11,987 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $1,000
PFAS Treatment $400
Total Estimated Cost $2,600

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,165
10 years
$10,330
20 years
$20,660

Compare: Estimated remediation cost is $2,600 (one-time) vs. $10,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Gettysburg Muni Authority (EPA ID: PA7010019) is a community water system in Pennsylvania that serves approximately 12,425 people from surface water sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: D (47/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

13 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
August 1, 2025 Contaminant 0700 Monitoring Resolved
July 11, 2025 Lead and Copper Rule Monitoring Resolved
October 1, 2024 Combined Radium Monitoring Resolved
April 1, 2024 Copper Monitoring Resolved
December 1, 2023 Contaminant 0700 Monitoring Resolved
August 1, 2023 Contaminant 0700 Monitoring Resolved
February 1, 2023 Contaminant 0700 Monitoring Resolved
January 1, 2023 Contaminant 0700 Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 0700 Other Violation 8 No
Copper Inorganic 1 No
Combined Radium Radionuclides 1 No
Surface Water Treatment Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No
E. coli Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
17325 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Gettysburg Muni Authority (PA7010019) on EPA.gov.

Frequently Asked Questions

Is Gettysburg Muni Authority water safe to drink?

Gettysburg Muni Authority has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Gettysburg Muni Authority serve?

Gettysburg Muni Authority serves approximately 12,425 people across 3 ZIP codes in Pennsylvania.

Where does Gettysburg Muni Authority get its water?

The primary water source is surface water.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Minimal — disinfection only
Disinfection (typically chlorine) without additional filtration or coagulation stages. Common for groundwater systems where source water meets federal standards after disinfection alone.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
CHLORINE

Treatment classification and chemical list sourced from GETTYSBURG MUNI AUTH Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Above Current MCL

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS compounds were measured above the current state-enforceable MCL.

Samples collected
464
Detections
16
Latest sample
4/14/2025
Highest analyte
PFOS: 14.1 ppt
Analyte Max detected Current MCL Status
PFOS 14.1 ppt 10 ppt Above current MCL
PFOA 7.4 ppt 10 ppt Above 2029 federal MCL
PFPeA 5 ppt
PFHxA 4.1 ppt
PFBS 3.7 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFBS
Perfluorobutanesulfonic acid
EPA-regulated (2024 NPDWR)
Component of EPA Hazard Index — combined exposure assessed against unitless threshold of 1.0.
4.05 ppt No federal limit set
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
2.895 ppt 10 ppt Below EPA limit
PFNA
Perfluorononanoic acid
EPA-regulated (2024 NPDWR)
0.472 ppt 10 ppt Below EPA limit
PFOS
Perfluorooctanesulfonic acid
EPA-regulated (2024 NPDWR)
11.348 ppt 4 ppt Above EPA limit
PFOA
Perfluorooctanoic acid
EPA-regulated (2024 NPDWR)
5.718 ppt 4 ppt Above EPA limit

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by GETTYSBURG MUNI AUTH.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
3
Galvanized — Replacement Required
3,762
Unknown Material
864
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-06-01 did not exceed the federal lead action level.
Population served: 12,425
Reported to Pennsylvania

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Gettysburg Muni Authority safe to drink?
Gettysburg Muni Authority has a D safety grade based on 13 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Gettysburg Muni Authority's water?
Detected contaminants include Contaminant 0700, Surface Water Treatment Rule, Lead and Copper Rule, E. coli. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Gettysburg Muni Authority serve?
Gettysburg Muni Authority serves approximately 12,425 people with drinking water across 3 ZIP codes.
What is Gettysburg Muni Authority's water source?
Gettysburg Muni Authority draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Gettysburg Muni Authority's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Gettysburg Muni Authority's service area?
The Gettysburg Muni Authority service area has a median household income of $79,164. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Gettysburg Muni Authority get its water?
Gettysburg Muni Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Gettysburg Muni Authority (EPA ID: PA7010019) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Pennsylvania Gettysburg Muni Authority

Get safety alerts for Gettysburg Muni Authority, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.