Washington Twp Water System
EPA ID: PA6250092 · 797 people served · 7 ZIP codes
While 3 violations did appear in Washington Twp Water System's five-year monitoring record, none remain unresolved — the utility has returned to full compliance and continues to serve approximately 797 residents under all current EPA drinking water standards.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 1 (2021) to 1 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Washington Twp Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Washington Twp Water System serves a community with a median household income of $78,961 and an estimated 41,005 residents across its service area. Approximately 63% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 36% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Washington Twp Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 3% of homes in Crawford County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Superfund Proximity Note: This service area ranks in the 67th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.
Infrastructure Risk
Detected Contaminants
How Washington Twp Water System compares to EPA limits
What This Means For You
Revised Total Coliform Rule at 3 presence exceeds the EPA maximum of presence.
Comparable Water Systems
Similar-sized systems in Pennsylvania
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Washington Twp Water System (EPA ID: PA6250092) is a community water system in Pennsylvania that serves approximately 797 people from groundwater sources.
This system provides water to 7 ZIP codes across 6 communities.
Average Home Safety Score: B (74/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2024 | Revised Total Coliform Rule | Monitoring | Resolved |
| July 1, 2023 | Revised Total Coliform Rule | Monitoring | Resolved |
| January 1, 2023 | Revised Total Coliform Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Revised Total Coliform Rule | Microbiological | 3 | No |
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 6 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
- 16403 — Cambridge Springs
- 16410 — Cranesville
- 16412 — Edinboro
- 16417 — Girard
- 16426 — Mc Kean
- 16441 — Waterford
- 16444 — Edinboro
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Washington Twp Water System (PA6250092) on EPA.gov.
Frequently Asked Questions
Is Washington Twp Water System water safe to drink?
Washington Twp Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Washington Twp Water System serve?
Washington Twp Water System serves approximately 797 people across 7 ZIP codes in Pennsylvania.
Where does Washington Twp Water System get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
PFAS Substances Detected in This System
This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.
In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →
Source: Consumer Confidence Report disclosed by Washington Twp Water System.
ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Washington Twp Water System (EPA ID: PA6250092) — request the latest Consumer Confidence Report or ask about specific contaminants.