Historical Compliance Records PA

Slippery Rock Muni Authority

EPA ID: PA5100079 ยท 15,778 people served ยท 2 ZIP codes

ZipCheckup's reading of EPA SDWIS for Slippery Rock Muni Authority (PA5100079): 4 EPA violations in the last five years. Water monitoring history for Slippery Rock Muni Authority includes 4 violations, each addressed and closed - the system holds no active EPA enforcement today for its 15,778 residents.

Data: EPA SDWIS

15,778
People Served
2
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.00055 mg/L
Max Lead Level
Zone 1
Radon Risk ยท High
3
Contaminants Flagged
$209K
Median Home Value in Service Area

Service Area Map

Coverage area for Slippery Rock Muni Authority Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$65,577
Median Household Income
18,477
Service Area Population
9%
Disadvantaged Population
30th
Poverty Percentile
50th
Energy Burden Percentile
60%
Pre-1986 Housing

The Slippery Rock Muni Authority serves a community with a median household income of $65,577 and an estimated 18,477 residents across its service area. Approximately 60% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐Ÿ’ง Where Does Your Water Come From?

Groundwater

Slippery Rock Muni Authority's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

Infrastructure Risk

43 yr
Avg Pipe Age
Copper
Pipe Material
27 yr
Est. Remaining Life
Stable
Decay Status
Installed 61% of expected lifespan used End of life

Detected Contaminants

How Slippery Rock Muni Authority compares to EPA limits

What This Means For You

Contaminant 2031 at 2 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Contaminant 0700 at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Pennsylvania

D 30 violations
D 47 violations
C 3 violations
D 13 violations
16 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $600
Total Estimated Cost $1,800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,800 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Slippery Rock Muni Authority (EPA ID: PA5100079) is a community water system in Pennsylvania that serves approximately 15,778 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 4 records in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 4 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
March 11, 2024 Consumer Confidence Report Rule Non-health-based Resolved
November 1, 2023 Contaminant 0700 Non-health-based Resolved
October 1, 2023 Contaminant 2031 Non-health-based Resolved
October 1, 2023 Contaminant 2031 Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 2031 Other Violation 2 No
Consumer Confidence Report Rule Reporting Failure 1 No
Contaminant 0700 Other Violation 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.00055 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by PA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Slippery Rock Muni Authority (PA5100079) on EPA.gov.

Frequently Asked Questions

Is Slippery Rock Muni Authority water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Slippery Rock Muni Authority; its 4 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Slippery Rock Muni Authority serve?

Slippery Rock Muni Authority serves approximately 15,778 people across 2 ZIP codes in Pennsylvania.

Where does Slippery Rock Muni Authority get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

What contaminants are in Slippery Rock Muni Authority's water?
Detected contaminants include Contaminant 2031, Consumer Confidence Report Rule, Contaminant 0700. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Slippery Rock Muni Authority serve?
Slippery Rock Muni Authority serves approximately 15,778 people with drinking water across 2 ZIP codes.
What is Slippery Rock Muni Authority's water source?
Slippery Rock Muni Authority draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Slippery Rock Muni Authority's water?
The maximum detected lead level is 0.00055 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Slippery Rock Muni Authority's service area?
The Slippery Rock Muni Authority service area has a median household income of $65,577. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Slippery Rock Muni Authority get its water?
Slippery Rock Muni Authority's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Slippery Rock Muni Authority (PA): 4 EPA Violations. https://zipcheckup.com/water-system/pa5100079/
BibTeX
@misc{zipcheckup-water-system-pa5100079,
  author = {{ZipCheckup}},
  title  = {{Slippery Rock Muni Authority (PA): 4 EPA Violations}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/pa5100079/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Slippery Rock Muni Authority (EPA ID: PA5100079) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Pennsylvania Slippery Rock Muni Authority

Get safety alerts for Slippery Rock Muni Authority, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.