Monitoring Violations PA

Wells Tannery Water Sys

EPA ID: PA4290003 · 95 people served · 2 ZIP codes

Federal compliance records for Wells Tannery Water Sys list 1 open violation that have not yet been resolved — the utility serves approximately 95 people, and each outstanding finding remains logged and active in the EPA enforcement database.

Data: EPA SDWIS Last verified: 2026-04-02

C · 55
Avg Safety Score
95
People Served
2
ZIP Codes Served
7
Violations (5yr)
Groundwater
Water Source
Zone 1
Radon Risk · High
4
Contaminants Flagged
$207K
Median Home Value in Service Area

Service Area Map

Coverage area for Wells Tannery Water Sys Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$67,084
Median Household Income
628
Service Area Population
0%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
74%
Pre-1986 Housing

The Wells Tannery Water Sys serves a community with a median household income of $67,084 and an estimated 628 residents across its service area. Approximately 74% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Wells Tannery Water Sys's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 1% of homes in Fulton County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

56 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
12 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 82% of expected lifespan used End of life

Detected Contaminants

How Wells Tannery Water Sys compares to EPA limits

Haloacetic Acids (HAA5) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Haloacetic Acids (HAA5) at 2 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Revised Total Coliform Rule at 3 presence exceeds the EPA maximum of presence.

Total Organic Carbon at 1 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Pennsylvania

0 violations
0 violations
0 violations
0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $1,500
Radon Mitigation $1,200
Total Estimated Cost $2,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $2,700 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

WELLS TANNERY WATER SYS (EPA ID: PA4290003) is a community water system in Pennsylvania that serves approximately 95 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (55/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

7 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Haloacetic Acids (HAA5) Monitoring Unresolved
April 1, 2023 Revised Total Coliform Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Revised Total Coliform Rule Microbiological 3 No
Haloacetic Acids (HAA5) Disinfection Byproducts 2 No
Total Organic Carbon Disinfection Byproducts 1 No
Stage 1 DBP Rule Treatment Failure 1 No

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Wells Tannery Water Sys (PA4290003) on EPA.gov.

Frequently Asked Questions

Is Wells Tannery Water Sys water safe to drink?

Wells Tannery Water Sys has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Wells Tannery Water Sys serve?

Wells Tannery Water Sys serves approximately 95 people across 2 ZIP codes in Pennsylvania.

Where does Wells Tannery Water Sys get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
32
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 1996-07-01 did not exceed the federal lead action level.
Population served: 95
Reported to Pennsylvania

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Wells Tannery Water Sys safe to drink?
Wells Tannery Water Sys has a C safety grade based on 7 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Wells Tannery Water Sys's water?
Detected contaminants include Haloacetic Acids (HAA5), Revised Total Coliform Rule, Total Organic Carbon, Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Wells Tannery Water Sys serve?
Wells Tannery Water Sys serves approximately 95 people with drinking water across 2 ZIP codes.
What is Wells Tannery Water Sys's water source?
Wells Tannery Water Sys draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Wells Tannery Water Sys's service area?
The Wells Tannery Water Sys service area has a median household income of $67,084. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Wells Tannery Water Sys get its water?
Wells Tannery Water Sys's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Wells Tannery Water Sys (EPA ID: PA4290003) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Pennsylvania Wells Tannery Water Sys

Get safety alerts for Wells Tannery Water Sys, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.