Brookside Village Mhp
EPA ID: PA4190019 · 475 people served · 4 ZIP codes
Zero EPA violations over five years — Brookside Village Mhp has kept tap water compliance clean for its full service population of 475.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Brookside Village Mhp Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Brookside Village Mhp serves a community with a median household income of $55,969 and an estimated 23,734 residents across its service area. Approximately 83% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Brookside Village Mhp's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 2% of homes in Luzerne County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.
Infrastructure Risk
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 14 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).
Comparable Water Systems
Similar-sized systems in Pennsylvania
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
BROOKSIDE VILLAGE MHP (EPA ID: PA4190019) is a community water system in Pennsylvania that serves approximately 475 people from groundwater sources.
This system provides water to 4 ZIP codes across 4 communities.
Average Home Safety Score: D (45/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Brookside Village Mhp (PA4190019) on EPA.gov.
Frequently Asked Questions
Is Brookside Village Mhp water safe to drink?
Based on EPA records, Brookside Village Mhp has no recorded violations in the past 5 years — a positive indicator of water quality management.
How many people does Brookside Village Mhp serve?
Brookside Village Mhp serves approximately 475 people across 4 ZIP codes in Pennsylvania.
Where does Brookside Village Mhp get its water?
The primary water source is groundwater.
PFAS Substances Detected in This System
This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.
In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →
Source: Consumer Confidence Report disclosed by BROOKSIDE VILLAGE MHP.
ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Brookside Village Mhp (EPA ID: PA4190019) — request the latest Consumer Confidence Report or ask about specific contaminants.