Water System Report PA

Mt Penn Boro Muni Authority

EPA ID: PA3060082 · 10,400 people served · 12 ZIP codes

Mt Penn Boro Muni Authority's five-year compliance history is clean by every EPA metric — no health-based violations, no monitoring lapses, no enforcement actions on record, reflecting consistent performance for a utility that supplies water to approximately 10,400 residents year after year.

Data: EPA SDWIS Last verified: 2026-04-02

10,400
People Served
12
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
0
Contaminants Flagged
$215K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 12 (2022) to 24 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Mt Penn Boro Muni Authority Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$80,649
Median Household Income
226,637
Service Area Population
30%
Disadvantaged Population
40th
Poverty Percentile
70th
Energy Burden Percentile
79%
Pre-1986 Housing

The Mt Penn Boro Muni Authority serves a community with a median household income of $80,649 and an estimated 226,637 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Mt Penn Boro Muni Authority's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
70th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 1% of homes in Berks County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

74 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
10 yr
Est. Remaining Life
Accelerating Decay
Decay Status
Installed 88% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 71 detections recorded. 16 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.014 ppt, PFOS: 0.018 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Pennsylvania

C 1 violation
C 19 violations
D 15 violations
0 violations
D 7 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,417
Radon Mitigation $1,200
PFAS Treatment $542
Water Filtration $300
Total Estimated Cost $3,458

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $3,458 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Mt Penn Boro Muni Authority (EPA ID: PA3060082) is a community water system in Pennsylvania that serves approximately 10,400 people from groundwater sources.

This system provides water to 12 ZIP codes across 1 community.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 11 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Mt Penn Boro Muni Authority (PA3060082) on EPA.gov.

Frequently Asked Questions

Is Mt Penn Boro Muni Authority water safe to drink?

Based on EPA records, Mt Penn Boro Muni Authority has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Mt Penn Boro Muni Authority serve?

Mt Penn Boro Muni Authority serves approximately 10,400 people across 12 ZIP codes in Pennsylvania.

Where does Mt Penn Boro Muni Authority get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
4
Latest sample
7/15/2025
Highest analyte
PFNA: 7.7 ppt
Analyte Max detected Current MCL Status
PFNA 7.7 ppt 10 ppt Below current MCL
PFOS 5.7 ppt 10 ppt Above 2029 federal MCL

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
100
Galvanized — Replacement Required
3,132
Unknown Material
539
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-06-01 did not exceed the federal lead action level.
Population served: 10,400
Reported to Pennsylvania

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Should I use a water filter?
Mt Penn Boro Muni Authority meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Mt Penn Boro Muni Authority serve?
Mt Penn Boro Muni Authority serves approximately 10,400 people with drinking water across 12 ZIP codes.
What is Mt Penn Boro Muni Authority's water source?
Mt Penn Boro Muni Authority draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Mt Penn Boro Muni Authority's service area?
The Mt Penn Boro Muni Authority service area has a median household income of $80,649. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Mt Penn Boro Muni Authority get its water?
Mt Penn Boro Muni Authority's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.
Home Water Systems Pennsylvania Mt Penn Boro Muni Authority

Get safety alerts for Mt Penn Boro Muni Authority, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.