Monitoring Violations PA

Milford Water Authority

EPA ID: PA2520046 · 2,420 people served · 1 ZIP code

Federal compliance records for Milford Water Authority list 6 open violations that have not yet been resolved — the utility serves approximately 2,420 people, and each outstanding finding remains logged and active in the EPA enforcement database.

Data: EPA SDWIS Last verified: 2026-04-02

C · 56
Avg Safety Score
2,420
People Served
1
ZIP Code Served
38
Violations (5yr)
Surface Water
Water Source
Zone 2
Radon Risk · Moderate
11
Contaminants Flagged
$284K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 1 (2022) to 1 (2023). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Milford Water Authority Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$89,935
Median Household Income
15,517
Service Area Population
11%
Disadvantaged Population
40th
Poverty Percentile
90th
Energy Burden Percentile
49%
Pre-1986 Housing

The Milford Water Authority serves a community with a median household income of $89,935 and an estimated 15,517 residents across its service area. Approximately 49% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Milford Water Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 0% of homes in Pike County, Pennsylvania rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

43 yr
Avg Pipe Age
Copper
Pipe Material
27 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 61% of expected lifespan used End of life

Detected Contaminants

How Milford Water Authority compares to EPA limits

Contaminant 2110 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.005 mg/L
Leukemia & blood cancers (known carcinogen)
Haloacetic Acids (HAA5) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Contaminant 2110 at 1 mg/L exceeds the EPA maximum of 0.005 mg/L. Leukemia & blood cancers (known carcinogen). Consider granular activated carbon (GAC) filtration.

Haloacetic Acids (HAA5) at 2 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Contaminant 0700 at 19 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Contaminant 2110 was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Pennsylvania

F 43 violations
C 36 violations
C 2 violations
Smethport Borough
2,400 people
C 13 violations
Aqua Pa Monroe Twp
2,400 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $1,200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$7,500
10 years
$15,000
20 years
$30,000

Compare: Estimated remediation cost is $2,400 (one-time) vs. $15,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Milford Water Authority (EPA ID: PA2520046) is a community water system in Pennsylvania that serves approximately 2,420 people from surface water sources.

This system serves ZIP code 18337 in Milford.

Average Home Safety Score: C (56/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

38 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
September 11, 2025 Lead and Copper Rule Monitoring Unresolved
August 1, 2025 Contaminant 0700 Monitoring Unresolved
April 11, 2025 Lead and Copper Rule Monitoring Unresolved
October 1, 2024 Surface Water Treatment Rule Monitoring Resolved
August 1, 2024 Consumer Confidence Report Rule Monitoring Resolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
May 1, 2024 Contaminant 0700 Monitoring Resolved
March 1, 2024 Revised Total Coliform Rule Monitoring Unresolved
March 1, 2024 Contaminant 0700 Monitoring Resolved
January 1, 2024 Contaminant 2063 Monitoring Unresolved
January 1, 2024 Revised Total Coliform Rule Monitoring Unresolved
January 1, 2024 Copper Monitoring Resolved
October 1, 2023 Haloacetic Acids (HAA5) Monitoring Resolved
August 1, 2023 Fecal Coliform Monitoring Resolved
May 1, 2023 Consumer Confidence Report Rule Monitoring Resolved
May 1, 2023 Contaminant 0700 Monitoring Resolved
April 1, 2023 Contaminant 0700 Monitoring Resolved
January 1, 2023 Haloacetic Acids (HAA5) Monitoring Resolved
January 1, 2023 Contaminant 2110 Monitoring Resolved
January 1, 2023 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 0700 Other Violation 19 No
Consumer Confidence Report Rule Reporting Failure 4 No
Surface Water Treatment Rule Treatment Failure 3 No
Revised Total Coliform Rule Microbiological 3 No
Haloacetic Acids (HAA5) Disinfection Byproducts 2 No
Lead and Copper Rule Treatment Failure 2 No
Copper Inorganic 1 No
Contaminant 2063 Other Violation 1 No
Contaminant 2110 Other Violation 1 No
Stage 1 DBP Rule Treatment Failure 1 No
Fecal Coliform Microbiological 1 No

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by PA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Milford Water Authority (PA2520046) on EPA.gov.

Frequently Asked Questions

Is Milford Water Authority water safe to drink?

Milford Water Authority has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Milford Water Authority serve?

Milford Water Authority serves approximately 2,420 people across 1 ZIP code in Pennsylvania.

Where does Milford Water Authority get its water?

The primary water source is surface water.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
3
Galvanized — Replacement Required
0
Unknown Material
814
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 1993-07-01 did not exceed the federal lead action level.
Population served: 2,420
Reported to Pennsylvania

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Milford Water Authority safe to drink?
Milford Water Authority has a C safety grade based on 38 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Milford Water Authority's water?
Detected contaminants include Contaminant 2110, Haloacetic Acids (HAA5), Contaminant 0700, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Milford Water Authority serve?
Milford Water Authority serves approximately 2,420 people with drinking water across 1 ZIP code.
What is Milford Water Authority's water source?
Milford Water Authority draws water from surface water sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Milford Water Authority's service area?
The Milford Water Authority service area has a median household income of $89,935. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Milford Water Authority get its water?
Milford Water Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Milford Water Authority (EPA ID: PA2520046) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Pennsylvania Milford Water Authority

Get safety alerts for Milford Water Authority, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.