Health Violations Found KY 5 HEALTH VIOLATIONS

Jenkins Water System

EPA ID: KY0670213 · 2,609 people served · 5 ZIP codes

Compliance tracking for Jenkins Water System shows 2 pending violations logged in the EPA system — the supplier delivers water to approximately 2,609 residents while those findings remain open.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
2,609
People Served
5
ZIP Codes Served
6
Violations (5yr)
Surface Water
Water Source
0.0025 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
3
Contaminants Flagged

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 10 (2022) to 8 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Jenkins Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$33,587
Median Household Income
4,007
Service Area Population
93%
Disadvantaged Population
84th
Poverty Percentile
90th
Energy Burden Percentile
62%
Pre-1986 Housing

The Jenkins Water System serves a community with a median household income of $33,587 and an estimated 4,007 residents across its service area. Approximately 62% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 93% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Jenkins Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
52th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 1% of homes in Letcher County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

50 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 68% of expected lifespan used End of life

Detected Contaminants

How Jenkins Water System compares to EPA limits

Lead 1 mg/L (action level) (EXCEEDS LIMIT)
0 EPA Limit: 0.015 mg/L (action level)
Brain damage in children, kidney & blood pressure in adults
Total Trihalomethanes (TTHM) 4 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns
Haloacetic Acids (HAA5) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Lead at 1 mg/L (action level) exceeds the EPA maximum of 0.015 mg/L (action level). Brain damage in children, kidney & blood pressure in adults. Consider reverse osmosis filtration.

Total Trihalomethanes (TTHM) at 4 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Haloacetic Acids (HAA5) at 1 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Lead was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Kentucky

C 0 violations
C 1 violation
B 0 violations
C 0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,680
Radon Mitigation $400
Water Filtration $120
Total Estimated Cost $2,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Property Value Decline $4,093

5% of median home value (EPA est.)

Estimated Cumulative Cost Per Household

5 years
$7,045
10 years
$14,090
20 years
$28,180

Compare: Estimated remediation cost is $2,200 (one-time) vs. $14,090 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

JENKINS WATER SYSTEM (EPA ID: KY0670213) is a community water system in Kentucky that serves approximately 2,609 people from surface water sources.

This system provides water to 5 ZIP codes across 5 communities.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

5 health-based violations recorded in the past 5 years. 2 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 1, 2024 Haloacetic Acids (HAA5) Health-based Resolved
April 1, 2023 Total Trihalomethanes (TTHM) Health-based Resolved
January 1, 2023 Total Trihalomethanes (TTHM) Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 4 Yes
Lead Inorganic 1 No
Haloacetic Acids (HAA5) Disinfection Byproducts 1 Yes

Health Risk Details

Total Trihalomethanes (TTHM) (EPA limit: 0.08 mg/L)

Bladder & rectal cancer risk; reproductive concerns At-risk groups: pregnant women, long-term consumers of chlorinated water, people who frequently shower in chlorinated water.

Removal methods: granular activated carbon (GAC), carbon block filter, point-of-entry aeration. Find the right filter →

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
41537 0.0025 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 4 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Jenkins Water System (KY0670213) on EPA.gov.

Frequently Asked Questions

Is Jenkins Water System water safe to drink?

Jenkins Water System has recorded 5 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Jenkins Water System serve?

Jenkins Water System serves approximately 2,609 people across 5 ZIP codes in Kentucky.

Where does Jenkins Water System get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Jenkins Water System Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from Jenkins Water System Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
0
Galvanized — Replacement Required
968
Unknown Material
130
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 2,609
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL · Total Trihalomethanes (TTHM)
    2024-07-01/2024-09-30
    Water samples showed that the amount of this contaminant in our drinking water was above its standard (called a maximum contaminant level and abbreviated MCL) for the period indicated.

Violations record from Jenkins Water System Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Jenkins Water System safe to drink?
Jenkins Water System has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Jenkins Water System's water?
Detected contaminants include Lead, Total Trihalomethanes (TTHM), Haloacetic Acids (HAA5). Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Jenkins Water System serve?
Jenkins Water System serves approximately 2,609 people with drinking water across 5 ZIP codes.
What is Jenkins Water System's water source?
Jenkins Water System draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Jenkins Water System's water?
The maximum detected lead level is 0.0025 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Jenkins Water System's service area?
The Jenkins Water System service area has a median household income of $33,587. EPA EJScreen data classifies 93% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Jenkins Water System get its water?
Jenkins Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Jenkins Water System (EPA ID: KY0670213) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Jenkins Water System

Get safety alerts for Jenkins Water System, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.