Monitoring Violations CT

Bristol Water Department

EPA ID: CT0170011 · 52,079 people served · 7 ZIP codes

7 total violations across five years at Bristol Water Department — every finding closed, utility compliant today, 52,079 served.

Data: EPA SDWIS Last verified: 2026-04-02

B · 78
Avg Safety Score
52,079
People Served
7
ZIP Codes Served
7
Violations (5yr)
Surface Water
Water Source
0.009 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
2
Contaminants Flagged
$252K
Median Home Value in Service Area

Service Area Map

Coverage area for Bristol Water Department Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$99,855
Median Household Income
116,577
Service Area Population
21%
Disadvantaged Population
30th
Poverty Percentile
63th
Energy Burden Percentile
70%
Pre-1986 Housing

The Bristol Water Department serves a community with a median household income of $99,855 and an estimated 116,577 residents across its service area. Approximately 70% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Bristol Water Department's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
47th
Wastewater Discharge Proximity
57th
Superfund Site Proximity

Infrastructure Risk

53 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
14 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 79% of expected lifespan used End of life

Detected Contaminants

How Bristol Water Department compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 21 detections recorded. 8 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.012 ppt, PFOS: 0.016 ppt, PFHxS: 0.018 ppt, PFHpA: 0.018 ppt, PFNA: 0.013 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Connecticut

A 5 violations
Aquarion-greenwich
53,297 people
0 violations
Meriden Water Division
58,441 people
C 5 violations
B 8 violations
Danbury Water Department
62,055 people
C 9 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Radon Mitigation Water Filtration
Flood Insurance $1,200
PFAS Treatment $480
Radon Mitigation $320
Water Filtration $60
Total Estimated Cost $2,060

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,165
10 years
$10,330
20 years
$20,660

Compare: Estimated remediation cost is $2,060 (one-time) vs. $10,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bristol Water Department (EPA ID: CT0170011) is a community water system in Connecticut that serves approximately 52,079 people from surface water sources.

This system provides water to 7 ZIP codes across 6 communities.

Average Home Safety Score: B (78/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

7 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
August 10, 2025 Surface Water Treatment Rule Monitoring Resolved
December 30, 2024 Stage 1 DBP Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 4 No
Stage 1 DBP Rule Treatment Failure 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
06010 0.009 mg/L No N/A
06011 0.009 mg/L No N/A
06013 0.0051 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 5 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bristol Water Department (CT0170011) on EPA.gov.

Frequently Asked Questions

Is Bristol Water Department water safe to drink?

Bristol Water Department has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Bristol Water Department serve?

Bristol Water Department serves approximately 52,079 people across 7 ZIP codes in Connecticut.

Where does Bristol Water Department get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
290
Detections
3
Latest sample
3/13/2024
Highest analyte
PFOA: 4.1 ppt
Analyte Max detected Current MCL Status
PFOA 4.1 ppt 10 ppt Above 2029 federal MCL
PFPeA 3.1 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
17,286
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 52,079
Reported to Connecticut

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Bristol Water Department safe to drink?
Bristol Water Department earns a B safety grade with 7 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Bristol Water Department's water?
Detected contaminants include Surface Water Treatment Rule, Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bristol Water Department serve?
Bristol Water Department serves approximately 52,079 people with drinking water across 7 ZIP codes.
What is Bristol Water Department's water source?
Bristol Water Department draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bristol Water Department's water?
The maximum detected lead level is 0.009 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bristol Water Department's service area?
The Bristol Water Department service area has a median household income of $99,855. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Bristol Water Department get its water?
Bristol Water Department's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bristol Water Department (EPA ID: CT0170011) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Connecticut Bristol Water Department

Get safety alerts for Bristol Water Department, Connecticut

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.