CITY REPORT PA

Lanse, PA: High Radon Risk — 40/100 (2026)

1 ZIP code · 2 water systems · Updated 2026-06-03

Water monitoring data from Lanse, PA tells a below-average story — health violations are present and system-level detail is worth reviewing before drawing conclusions.

How Lanse Compares

Lanse40/100
Pennsylvania avg55/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
2
Water Systems
0
ZIPs with Violations
D · 40
Avg Safety Score
Zone 1
Radon Risk (High)
$1,200
Est. Remediation

What You Should Know About Lanse Water

  • Homes built before 1986: 84% — older plumbing may contain lead solder.
  • Estimated remediation: $1,200 per household.

Who Supplies Your Water in Lanse

In Lanse, PA, residential water supply is distributed across multiple utilities rather than concentrated in one. The 2 leading providers out of 2 tracked systems each control their own infrastructure, file separate EPA compliance reports, and set independent rate schedules.

PAW PHILIPSBURG
Serves ~20,784 people
40
/100
COOPER TWP MUNICIPAL AUTH
Serves ~3,700 people
40
/100

Overview

We track water quality and home safety data for 1 ZIP code in Lanse, Pennsylvania (population ~101), covering 2 community water systems serving approximately 24,484 people region-wide.

No EPA violations recorded across any ZIP codes in Lanse — an excellent indicator of water quality.

Home Safety Score

Average Home Safety Score for Lanse: D (40/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Lanse water systems draw from: Surface water.

Lead & Copper

  • Lead data: not yet available for Lanse
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Areas with No Violations

ZIP Code Safety Score System Population
16849 D COOPER TWP MUNICIPAL AUTH 3,700

All ZIP Codes in Lanse

Data Sources

Updated daily.

Housing & Infrastructure in Lanse

1949
Median Build Year
84%
Built Before 1986
67%
Built Before 1970
Galvanized Steel or Copper
Likely Pipe Material

With 84% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Reading the housing age data for Lanse — median build year 1949 — the overriding implication is that the plumbing materials inside a typical home here reflect pre-1986 construction standards. In practical terms, that means lead-soldered copper joints are common across much of the housing stock. Where those materials are present, water can leach lead as it moves through joints — a pathway that corrosion control treatment under federal rules is designed to reduce, though it cannot eliminate lead risk where the plumbing materials themselves contain lead.

1949
Median Year Built
84%
Pre-1986 (Lead Paint Risk)
67%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (67%) 1970–1986 (17%) Post-1986 (16%)

Over half of homes in Lanse were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Lead Exposure Risk for Children in Lanse

84%
Homes Built Before 1986

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Pulling a tap sample fills the gap that utility data cannot close, particularly here where 84% of housing dates from the pre-rule era and citywide monitoring sits at or above the regulatory mark in Lanse.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

What You Can Do in Lanse

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. An NSF-certified pitcher or under-sink filter removes most common contaminants.
  3. Check your home's plumbing. With 84% of homes built before 1986, lead solder is a real possibility.
  4. Review your water system's CCR. Your utility publishes an annual Consumer Confidence Report with detailed test results. Request it or find it online.

Frequently Asked Questions

Is the water safe to drink in Lanse, PA?
Lanse has an average water safety score of 40/100 (Grade D). No EPA violations on record. Check individual ZIP code reports for details specific to your neighborhood.
How does Lanse compare to Pennsylvania average?
Lanse has an average water safety score of 40/100, which is below the Pennsylvania state average of 55/100.
How many water systems serve Lanse?
Lanse is served by 2 public water systems across 1 ZIP code, serving approximately 101 people.
How much does it cost to fix water issues in Lanse?
Estimated remediation costs in Lanse average $1,200 per household, ranging from $800 to $1,500. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesPennsylvania → Lanse, PA

Get safety alerts for Lanse, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.