CITY REPORT PA

Howard, PA: 17 Violations — 54/100 (2026)

1 ZIP code · 7 water systems · Updated 2026-06-03

Across water systems in Howard, EPA data shows a below-average compliance pattern for PA — health-based violations are on file in several areas, and checking the specific system serving your address is a practical first step for concerned residents.

How Howard Compares

Howard54/100
Pennsylvania avg55/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
7
Water Systems
1
ZIPs with Violations
D · 54
Avg Safety Score
Zone 1
Radon Risk (High)
$207K
Median Home Value
$2,400
Est. Remediation (1.2% of home value)

What You Should Know About Howard Water

  • Your city's water systems recorded 17 violations in the past 5 years.
  • Homes built before 1986: 65% — older plumbing may contain lead solder.
  • Estimated remediation: $2,400 per household.

Who Supplies Your Water in Howard

Residential water in Howard, PA is supplied by 3 separate utilities — not one centralized authority. Each of those providers operates under its own service territory boundary, maintains its own distribution infrastructure, and files compliance documentation with the EPA on its own timeline. Federal data counts 7 water systems in the area, with these providers collectively accounting for the dominant share of household connections.

Walker Twp Water Assoc
Serves ~3,250 people · 17 violations
54
/100
Milesburg Borough Water Authority
Serves ~2,750 people · 17 violations
54
/100
Paw Nittany
Serves ~1,499 people · 17 violations
54
/100

Overview

We track water quality and home safety data for 1 ZIP code in Howard, Pennsylvania, covering 7 community water systems serving approximately 6,346 people.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Howard: D (54/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Howard water systems draw from: Groundwater.

Lead & Copper

  • Lead data: not yet available for Howard
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Surface Water Treatment Rule Treatment Technique 8 1
Contaminant 0700 Other 6 1
Nickel Inorganic 4 1
Haloacetic Acids (HAA5) Disinfection Byproducts 4 1
Radium-228 Radionuclides 4 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
16841 D 17 0 Borough of Howard

All ZIP Codes in Howard

  • 16841 [D] — 17 violations

Data Sources

Updated daily.

Top Contaminants in Howard Water

Surface Water Treatment Rule 8 violations
Treatment Technique
Pathogens may not be adequately removed
Contaminant 0700 6 violations
Other
Nickel 4 violations
Inorganic · EPA limit: 0.1 mg/L
Skin and lung effects at high exposure

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Housing & Infrastructure in Howard

1973
Median Build Year
65%
Built Before 1986
29%
Built Before 1970
Copper
Likely Pipe Material

With 65% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

While newer cities carry lower aggregate plumbing risk from lead-era construction, Howard sits firmly in the older category. The median build year of 1973 indicates that more than half the housing stock was built before 1986, when lead solder was still legally used in residential copper plumbing — and a substantial portion likely predates 1970, when lead pipes were still commonly installed for service lines. These two thresholds together define the elevated plumbing risk environment that older housing cities carry, independent of what the municipal water supply delivers to the meter.

1973
Median Year Built
65%
Pre-1986 (Lead Paint Risk)
29%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (29%) 1970–1986 (36%) Post-1986 (35%)

Over half of homes in Howard were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Cost Context: What Remediation Means for Howard Homeowners

At current valuations, Howard falls in the moderate remediation-share tier — a level where treating this as a budgeted line item rather than an ad-hoc expense is the practical approach.

Median Home Value
$207,100
Est. Remediation
$2,400
Remediation as % of home value 1.2%

Remediation costs are moderate relative to home values in Howard. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 3% below the Pennsylvania average.

Lead Exposure Risk for Children in Howard

65%
Homes Built Before 1986

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Households with kids in the home — for whom CDC guidance places particular weight on minimizing exposure — face a specific local picture in Howard. 65% of homes here come from the pre-rule era, and aggregate utility samples either approach or cross 0.015 mg/L. A baseline draw-test kit and certified lead-removal filtration are available via retailer networks for households confirming conditions at a specific tap.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Flood & Climate Risk in Howard

Taken together, Howard's 5 NFIP flood insurance claims and 100% FEMA flood zone coverage place it in the moderate range of exposure. That middle position has specific implications for water quality. The contamination pathways that flooding can open — surface water overwhelming treatment facility intake, floodwaters infiltrating private wells, distribution pressure changes creating backflow — are not constant risks in a moderate-exposure community. But they do become active during significant flood events, and the claim record here indicates enough of those events to make flood timing an occasional factor in local water quality conversations.

5
Total FEMA Flood Claims
$7,306
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones

Howard has a moderate flood history with 5 FEMA claims averaging $7,306 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Howard

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Howard's water.
  3. Check your home's plumbing. With 65% of homes built before 1986, lead solder is a real possibility.
  4. Review your water system's CCR. Your utility publishes an annual Consumer Confidence Report with detailed test results. Request it or find it online.

Frequently Asked Questions

Is the water safe to drink in Howard, PA?
Howard has an average water safety score of 54/100 (Grade D). 17 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Howard have?
Howard water systems have a total of 17 EPA violations. Violations are tracked across 1 ZIP code.
How does Howard compare to Pennsylvania average?
Howard has an average water safety score of 54/100, which is below the Pennsylvania state average of 55/100.
How many water systems serve Howard?
Howard is served by 7 public water systems across 1 ZIP code, serving approximately 6,346 people.
How much does it cost to fix water issues in Howard?
Estimated remediation costs in Howard average $2,400 per household, ranging from $1,600 to $3,300. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesPennsylvania → Howard, PA

Get safety alerts for Howard, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.