Annville, PA: 1 Health Violation - Home Safety 47/100
1 ZIP code · 2 water systems · Updated
ZipCheckup grade for Annville: D.
Several federal signals point to home-safety risks in this ZIP.
Your top priority: see the breakdown below and consider a certified water filter. NSF certified filters →
If you're researching Annville, PA tap water quality, the baseline finding is below average - health-based violations are documented in several service areas, and verifying the specific system at your address is the right next step.
How Annville Compares
Data: EPA SDWIS
Annville Water: The Quick Version
- Your city's water systems recorded 8 violations in the past 5 years.
- Average lead level: 0.0071 mg/L.
- Homes built before 1986: 70% - older plumbing may contain lead solder.
- Estimated remediation: $3,600 per household.
Water Systems Serving Annville
Water supply in Annville, PA follows a divided structure: 2 utilities account for the largest share of residential service out of 2 total systems, each managing its own distribution network and EPA reporting. Because these systems operate independently, rate decisions and compliance outcomes are determined separately.
- D
- D
Overview
We track home safety data for 1 ZIP code in Annville, Pennsylvania (population ~11,932), covering 2 community water systems serving approximately 107,200 people region-wide. The EPA snapshots used for this build directly map water systems to 1 of 1 ZIP codes.
1 of 1 ZIP code with a reported violation count in the available EPA record (100%) have recorded EPA violations. 1 health-based violation appear in the available health breakdown.
Home Safety Score
Average Home Safety Score for Annville: D (47/100)
Model 4.0.0 uses four measured components across three equally weighted domains. If a required domain is unavailable, no score is published:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| PFAS MCL Screen | UCMR 5 testing against the covered federal MCLs |
| Radon Risk | EPA radon zone classification |
| Annual AQI | EPA AirData county-year median with at least 90 observed days |
Water Sources
Annville water systems draw from: Surface water.
Lead & Copper
- Average lead level (90th percentile): 0.0071 mg/L (EPA action level: 0.015 mg/L)
- 0 of 1 ZIP code with known status exceed the EPA lead action level
Radon Risk
Dominant radon zone: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting | 10 | 1 |
| Chlorite | Disinfection Byproducts | 2 | 1 |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 2 | 1 |
| Contaminant 0700 | Other | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 17003 | D | 8 | 1 | Pa Amer Water Company |
All ZIP Codes in Annville
- 17003 [D] - 8 violations ⚠
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Reporting periods vary by source. Missing data is shown as unavailable, not as zero.
Key Contaminants Detected in Annville
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
How Old Is Annville's Housing Stock?
With 70% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
Decades of residential development in Annville took place before the two main regulatory milestones that reduced plumbing-era lead risk: the phase-out of lead pipes before 1970, and the federal ban on lead solder in 1986. With a median build year of 1976, the housing stock here is anchored in that earlier period. The distinction between pre-1970 and 1970-to-1986 construction matters: the oldest homes may have lead pipes in the service line and lead solder in the copper joints, while the 1970-to-1986 tier still carries the solder risk even after lead pipes became less common. Together, these two risk layers affect a majority of the residential properties in the city - a fact the aggregate water quality data doesn't directly reveal.
Over half of homes in Annville were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.
Source: U.S. Census Bureau ACS B25034.
Annville: Remediation Cost in Perspective
In Annville, the equity share of documented remediation is meaningful enough to move the household financial perspective from routine maintenance into deliberate budgeting territory - the cost-to-value ratio is moderate, and most homeowners benefit from mapping the full scope against available budgets before committing.
Remediation costs are moderate relative to home values in Annville. The estimated $2,400–$4,800 range is manageable for most homeowners but still worth budgeting for. Home values are 14% above the Pennsylvania average.
Protecting Children from Lead in Annville
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Households with kids in the home - for whom CDC guidance places particular weight on minimizing exposure - face a specific local picture in Annville. 70% of homes here come from the pre-rule era, and aggregate utility samples either approach or cross 0.015 mg/L. A baseline draw-test kit and certified lead-removal filtration are available via retailer networks for households confirming conditions at a specific tap.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Historical Flood-Claim Evidence for Annville
Historical NFIP data for Annville contains 186 flood insurance claims. Among claims with payment data, the average reported building, contents, and ICC component sum is $34,025. Among ZIP codes with claim records, 100% have an A- or V-family dominant rated zone recorded in those historical claims. This is not a complete current FEMA property-map inventory.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. The <strong>$3,600</strong> remediation estimate shown here excludes flood insurance and is not derived from NFIP claim count.
Claim count does not establish current property risk. Check the exact address in FEMA's current map and obtain a property-specific insurance quote when relevant.
Source: historical FEMA National Flood Insurance Program (NFIP) claim records. No current FEMA property-map designation is asserted.
What You Can Do in Annville
- Test your water at home. City-level data shows averages - your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Consumer Confidence Report Rule can reduce the most common contaminant found in Annville's water.
- Check your home's plumbing. With 70% of homes built before 1986, lead solder is a real possibility.
- Review your water system's CCR. Your utility publishes an annual Consumer Confidence Report with detailed test results. Request it or find it online.
Deep Dive Reports
Detailed analysis for Annville, PA