City of Gillette
EPA ID: WY5600019 · 32,222 people served · 4 ZIP codes
City of Gillette carries 1 open EPA violation that remain unresolved in the federal system — approximately 32,222 people fall within its service area.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Gillette Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The City of Gillette serves a community with a median household income of $77,169 and an estimated 45,106 residents across its service area. Approximately 45% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
City of Gillette's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Campbell County, Wyoming rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How City of Gillette compares to EPA limits
What This Means For You
Revised Total Coliform Rule at 3 presence exceeds the EPA maximum of presence.
Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Wyoming
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Gillette, (EPA ID: WY5600019) is a community water system in Wyoming that serves approximately 32,222 people from groundwater sources.
This system provides water to 4 ZIP codes across 2 communities.
Average Home Safety Score: C (65/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| October 1, 2023 | Revised Total Coliform Rule | Monitoring | Unresolved |
| October 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| June 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Revised Total Coliform Rule | Microbiological | 3 | No |
| Surface Water Treatment Rule | Treatment Failure | 2 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 82716 | 0.004 mg/L | No | N/A |
| 82717 | 0.004 mg/L | No | N/A |
| 82718 | 0.004 mg/L | No | N/A |
| 82727 | 0.002 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Gillette (WY5600019) on EPA.gov.
Frequently Asked Questions
Is City of Gillette water safe to drink?
City of Gillette has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does City of Gillette serve?
City of Gillette serves approximately 32,222 people across 4 ZIP codes in Wyoming.
Where does City of Gillette get its water?
The primary water source is groundwater.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from City of Gillette Water Division Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: City of Gillette Water Division Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Watershed exposure sources reported
Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.
Treatment classification and chemical list sourced from City of Gillette Water Division Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
The COG water department has been working diligently to identify service line materials throughout the water system, including conducting 995 field inspections in which no lead lines were found. In November of 2024 a 'Notice of Unknown Material Service Line' letter was mailed to all customers that had an unknown material portion of their service line.
Lead Service Line Replacement Tracker
This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.
City of Gillette Water Division
ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.
Learn more about Lead and Copper Rule replacement requirements →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Aesthetic water quality
These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.
Aesthetic measurements from City of Gillette Water Division Consumer Confidence Report.
Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.
Hard water detected in City of Gillette Water Division
Your utility's most recent Consumer Confidence Report flagged water hardness above EPA's secondary maximum contaminant level (120 ppm CaCO₃). This may cause scale buildup, reduced appliance lifespan, and dry skin or hair.
There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.
Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.
Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Notable events from the utility's CCR
These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.
- The COG completed and submitted the initial Lead and Copper Revised Rule (LCRR) service line inventory.
- A 'Notice of Unknown Material Service Line' letter was mailed to all customers that had an unknown material portion of their service line.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Gillette (EPA ID: WY5600019) — request the latest Consumer Confidence Report or ask about specific contaminants.