Cross Plains Waterworks
EPA ID: WI1130219 · 4,100 people served · 2 ZIP codes
In the current EPA monitoring period, Cross Plains Waterworks has 2 violations still listed as unresolved, with the utility supplying water to approximately 4,100 residents.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Cross Plains Waterworks Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Cross Plains Waterworks serves a community with a median household income of $97,159 and an estimated 8,917 residents across its service area. Approximately 60% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Cross Plains Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Dane County, Wisconsin rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.
Infrastructure Risk
Detected Contaminants
How Cross Plains Waterworks compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Radium-226 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Radium-226 was detected in this water system. ion exchange (water softener) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Wisconsin
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Cross Plains Waterworks (EPA ID: WI1130219) is a community water system in Wisconsin that serves approximately 4,100 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: C (60/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Resolved |
| July 1, 2024 | Combined Radium | Monitoring | Unresolved |
| April 1, 2024 | Radium-226 | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 2 | No |
| Combined Radium | Radionuclides | 1 | No |
| Radium-226 | Radionuclides | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 53528 | 0.0048 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WI or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Cross Plains Waterworks (WI1130219) on EPA.gov.
Frequently Asked Questions
Is Cross Plains Waterworks water safe to drink?
Cross Plains Waterworks has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Cross Plains Waterworks serve?
Cross Plains Waterworks serves approximately 4,100 people across 2 ZIP codes in Wisconsin.
Where does Cross Plains Waterworks get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Cross Plains Waterworks (EPA ID: WI1130219) — request the latest Consumer Confidence Report or ask about specific contaminants.