Water System Report WA

South Prairie Town of

EPA ID: WA5382300 · 489 people served · 6 ZIP codes

Unlike many utilities its size, South Prairie Town of carries a violation-free five-year record — no EPA notices, no MCL exceedances, serving 489 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 65
Avg Safety Score
489
People Served
6
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 3
Radon Risk · Low
0
Contaminants Flagged
$490K
Median Home Value in Service Area

Service Area Map

Coverage area for South Prairie Town of Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$120,941
Median Household Income
92,470
Service Area Population
22%
Disadvantaged Population
40th
Poverty Percentile
20th
Energy Burden Percentile
45%
Pre-1986 Housing

The South Prairie Town of serves a community with a median household income of $120,941 and an estimated 92,470 residents across its service area. Approximately 45% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

South Prairie Town of's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
80th
Superfund Site Proximity

About 1% of homes in Pierce County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 80th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

35 yr
Avg Pipe Age
Copper
Pipe Material
35 yr
Est. Remaining Life
Stable
Decay Status
Installed 50% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded.

State limits: PFOA: 0.01 ppt, PFOS: 0.015 ppt, PFHxS: 0.065 ppt, PFBS: 0.345 ppt, HFPO-DA: 0.024 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Washington

0 violations
C 0 violations
0 violations
A 8 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,200
PFAS Treatment $300
Total Estimated Cost $1,500

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,500 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

South Prairie Town of (EPA ID: WA5382300) is a community water system in Washington that serves approximately 489 people from groundwater sources.

This system provides water to 6 ZIP codes across 6 communities.

Average Home Safety Score: C (65/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 5 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for South Prairie Town of (WA5382300) on EPA.gov.

Frequently Asked Questions

Is South Prairie Town of water safe to drink?

Based on EPA records, South Prairie Town of has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does South Prairie Town of serve?

South Prairie Town of serves approximately 489 people across 6 ZIP codes in Washington.

Where does South Prairie Town of get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
88
Unknown Material
164
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 489
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from South Prairie Town of safe to drink?
South Prairie Town of has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
South Prairie Town of meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does South Prairie Town of serve?
South Prairie Town of serves approximately 489 people with drinking water across 6 ZIP codes.
What is South Prairie Town of's water source?
South Prairie Town of draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of South Prairie Town of's service area?
The South Prairie Town of service area has a median household income of $120,941. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does South Prairie Town of get its water?
South Prairie Town of's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

South Prairie Town of (EPA ID: WA5382300) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Washington South Prairie Town of

Get safety alerts for South Prairie Town of, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.