Monitoring Violations WA

City of Kirkland

EPA ID: WA5342250 · 67,107 people served · 6 ZIP codes

Past issues aside, City of Kirkland cleared all 2 violations and is compliant today, supplying 67,107 residents.

Data: EPA SDWIS Last verified: 2026-04-02

A · 91
Avg Safety Score
67,107
People Served
6
ZIP Codes Served
2
Violations (5yr)
Surface Water
Water Source
0.0029 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
2
Contaminants Flagged
$1.3M
Median Home Value in Service Area

Service Area Map

Coverage area for City of Kirkland Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$164,848
Median Household Income
232,936
Service Area Population
12%
Disadvantaged Population
30th
Poverty Percentile
10th
Energy Burden Percentile
50%
Pre-1986 Housing

The City of Kirkland serves a community with a median household income of $164,848 and an estimated 232,936 residents across its service area. Approximately 50% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

City of Kirkland's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 2% of homes in King County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
22 yr
Est. Remaining Life
Stable
Decay Status
Installed 68% of expected lifespan used End of life

Detected Contaminants

How City of Kirkland compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.01 ppt, PFOS: 0.015 ppt, PFHxS: 0.065 ppt, PFBS: 0.345 ppt, HFPO-DA: 0.024 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Washington

City of Tumwater
66,373 people
B 8 violations
City of Lynnwood
68,204 people
0 violations
0 violations
Southwood
64,155 people
0 violations
City of Bremerton
70,913 people
A 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,200
PFAS Treatment $200
Total Estimated Cost $1,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,400 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Kirkland (EPA ID: WA5342250) is a community water system in Washington that serves approximately 67,107 people from surface water sources.

This system provides water to 6 ZIP codes across 3 communities.

Average Home Safety Score: A (91/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
98033 0.0029 mg/L No N/A
98034 0.0029 mg/L No N/A
98083 0.0029 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 5 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Kirkland (WA5342250) on EPA.gov.

Frequently Asked Questions

Is City of Kirkland water safe to drink?

City of Kirkland has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Kirkland serve?

City of Kirkland serves approximately 67,107 people across 6 ZIP codes in Washington.

Where does City of Kirkland get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(425) 587-3900
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
123 Fifth Avenue, Kirkland, WA 98033

Contact information from City of Kirkland Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinecalcium oxidesodium carbonatefluoride

Source: City of Kirkland Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Kirkland Consumer Confidence Report:
The Washington State Department of Health (DOH) conducted a source water assessment and has determined that all surface water systems are considered highly susceptible to contamination.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
sodium carbonate
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
calcium oxide

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

MicrobialInorganicPesticides and herbicidesOrganicRadioactive

Treatment classification and chemical list sourced from City of Kirkland Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead service line replacement plan from City of Kirkland Consumer Confidence Report:
Kirkland submitted the baseline inventory to Washington State Department of Health (DOH) by the due date, October 16, 2024. No lead service lines were discovered within Kirkland's water service area.

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Kirkland

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
82
Galvanized — Replacement Required
0
Unknown Material
13,250
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Population served: 69,243
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
8.25
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.7 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
21 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.

Aesthetic measurements from City of Kirkland Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Hard water detected in City of Kirkland

Your utility reported water hardness of 243.71 ppm CaCO₃ (1.43 grains per gallon) in its most recent Consumer Confidence Report. This is in the hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.

Solutions for hard water

There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.

Recommended Aquasana system for your hardness level

Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.

Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.

Frequently Asked Questions

Is water from City of Kirkland safe to drink?
City of Kirkland earns a A safety grade with 2 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Kirkland's water?
Detected contaminants include Surface Water Treatment Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Kirkland serve?
City of Kirkland serves approximately 67,107 people with drinking water across 6 ZIP codes.
What is City of Kirkland's water source?
City of Kirkland draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Kirkland's water?
The maximum detected lead level is 0.0029 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Kirkland's service area?
The City of Kirkland service area has a median household income of $164,848. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Kirkland get its water?
City of Kirkland's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Kirkland (EPA ID: WA5342250) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Washington City of Kirkland

Get safety alerts for City of Kirkland, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.