Water System Report WA

Wanapum Indian Village

EPA ID: WA5329075 · 60 people served · 1 ZIP code

Zero violations in five consecutive years of EPA monitoring — Wanapum Indian Village has held a clean track record across every reporting cycle in that span, with no enforcement activity of any kind on file for the full service population of 60 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 83
Avg Safety Score
60
People Served
1
ZIP Code Served
0
Violations (5yr)
Groundwater
Water Source
0.0012 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged

Service Area Demographics

$90,428
Median Household Income
905
Service Area Population
63%
Disadvantaged Population
70th
Poverty Percentile
30th
Energy Burden Percentile
76%
Pre-1986 Housing

The Wanapum Indian Village serves a community with a median household income of $90,428 and an estimated 905 residents across its service area. Approximately 76% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 63% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Wanapum Indian Village's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 1% of homes in Grant County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

51 yr
Avg Pipe Age
Copper
Pipe Material
19 yr
Est. Remaining Life
Stable
Decay Status
Installed 73% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in Washington

B 0 violations
0 violations
0 violations
0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation
Radon Mitigation $400
Total Estimated Cost $400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

Wanapum Indian Village (EPA ID: WA5329075) is a community water system in Washington that serves approximately 60 people from groundwater sources.

This system serves ZIP code 99321 in Beverly.

Average Home Safety Score: B (83/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
99321 0.0012 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Wanapum Indian Village (WA5329075) on EPA.gov.

Frequently Asked Questions

Is Wanapum Indian Village water safe to drink?

Based on EPA records, Wanapum Indian Village has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Wanapum Indian Village serve?

Wanapum Indian Village serves approximately 60 people across 1 ZIP code in Washington.

Where does Wanapum Indian Village get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
15
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 60
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Wanapum Indian Village safe to drink?
Wanapum Indian Village earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
Wanapum Indian Village meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Wanapum Indian Village serve?
Wanapum Indian Village serves approximately 60 people with drinking water across 1 ZIP code.
What is Wanapum Indian Village's water source?
Wanapum Indian Village draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Wanapum Indian Village's water?
The maximum detected lead level is 0.0012 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Wanapum Indian Village's service area?
The Wanapum Indian Village service area has a median household income of $90,428. EPA EJScreen data classifies 63% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Wanapum Indian Village get its water?
Wanapum Indian Village's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Home Water Systems Washington Wanapum Indian Village

Get safety alerts for Wanapum Indian Village, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.