Colville Water Department
EPA ID: WA5314200 · 4,955 people served · 1 ZIP code
Based on the latest federal compliance data, Colville Water Department has 5 violations that the EPA has not yet closed — those outstanding findings are part of the enforcement record for a utility that delivers water to approximately 4,955 people throughout its service territory.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 1 (2023) to 1 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Colville Water Department Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Colville Water Department serves a community with a median household income of $61,891 and an estimated 12,939 residents across its service area. Approximately 61% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 58% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Colville Water Department's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 3% of homes in Stevens County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Colville Water Department compares to EPA limits
What This Means For You
Consumer Confidence Report Rule at 7 mg/L exceeds the EPA maximum of mg/L.
Barium at 9 mg/L exceeds the EPA maximum of 2 mg/L.
Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Total Organic Carbon at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Washington
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Colville Water Department (EPA ID: WA5314200) is a community water system in Washington that serves approximately 4,955 people from groundwater sources.
This system serves ZIP code 99114 in Colville.
Average Home Safety Score: C (56/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Barium | Monitoring | Unresolved |
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Resolved |
| April 1, 2025 | Barium | Monitoring | Unresolved |
| January 1, 2025 | Barium | Monitoring | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| March 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2023 | Total Organic Carbon | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Barium | Inorganic | 9 | No |
| Consumer Confidence Report Rule | Reporting Failure | 7 | No |
| Surface Water Treatment Rule | Treatment Failure | 3 | No |
| Total Organic Carbon | Disinfection Byproducts | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 99114 | 0.0011 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WA or modeled from parcel and building-footprint data.
- 99114 — Colville
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Colville Water Department (WA5314200) on EPA.gov.
Frequently Asked Questions
Is Colville Water Department water safe to drink?
Colville Water Department has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Colville Water Department serve?
Colville Water Department serves approximately 4,955 people across 1 ZIP code in Washington.
Where does Colville Water Department get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Colville Water Department (EPA ID: WA5314200) — request the latest Consumer Confidence Report or ask about specific contaminants.