Monitoring Violations WA

Camas Municipal Water Sewer System

EPA ID: WA5310800 · 31,794 people served · 5 ZIP codes

Compliance tracking for Camas Municipal Water Sewer System shows 1 pending violation logged in the EPA system — the supplier delivers water to approximately 31,794 residents while those findings remain open.

Data: EPA SDWIS Last verified: 2026-04-02

C · 63
Avg Safety Score
31,794
People Served
5
ZIP Codes Served
2
Violations (5yr)
Groundwater
Water Source
0.0015 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$502K
Median Home Value in Service Area

Service Area Map

Coverage area for Camas Municipal Water Sewer System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$95,863
Median Household Income
194,726
Service Area Population
10%
Disadvantaged Population
42th
Poverty Percentile
26th
Energy Burden Percentile
32%
Pre-1986 Housing

The Camas Municipal Water Sewer System serves a community with a median household income of $95,863 and an estimated 194,726 residents across its service area.

💧 Where Does Your Water Come From?

Groundwater

Camas Municipal Water Sewer System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
12th
Wastewater Discharge Proximity
62th
Superfund Site Proximity

About 1% of homes in Clark County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 62th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

32 yr
Avg Pipe Age
Copper
Pipe Material
38 yr
Est. Remaining Life
Stable
Decay Status
Installed 46% of expected lifespan used End of life

Detected Contaminants

How Camas Municipal Water Sewer System compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 21 detections recorded. 9 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.01 ppt, PFOS: 0.015 ppt, PFHxS: 0.065 ppt, PFBS: 0.345 ppt, HFPO-DA: 0.024 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Washington

Spanaway Water Company
31,908 people
A 3 violations
City of Moses Lake
32,428 people
B 16 violations
City of Mercer Island
30,689 people
A 0 violations
C 2 violations
City of Bothell Water
33,643 people
B 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,440
Radon Mitigation $1,200
PFAS Treatment $600
Water Filtration $180
Total Estimated Cost $3,420

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $3,420 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Camas Municipal Water Sewer System (EPA ID: WA5310800) is a community water system in Washington that serves approximately 31,794 people from groundwater sources.

This system provides water to 5 ZIP codes across 3 communities.

Average Home Safety Score: C (63/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 2 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
98607 0.0015 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Camas Municipal Water Sewer System (WA5310800) on EPA.gov.

Frequently Asked Questions

Is Camas Municipal Water Sewer System water safe to drink?

Camas Municipal Water Sewer System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Camas Municipal Water Sewer System serve?

Camas Municipal Water Sewer System serves approximately 31,794 people across 5 ZIP codes in Washington.

Where does Camas Municipal Water Sewer System get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Above Current MCL

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS compounds were measured above the current state-enforceable MCL.

Samples collected
261
Detections
6
Latest sample
10/25/2023
Highest analyte
PFOS: 12 ppt
Analyte Max detected Current MCL Status
PFOS 12 ppt 10 ppt Above current MCL
PFOA 4.4 ppt 10 ppt Above 2029 federal MCL
PFBS 3.8 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
1,378
Unknown Material
8,968
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 31,794
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Camas Municipal Water Sewer System safe to drink?
Camas Municipal Water Sewer System has a C safety grade based on 2 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Camas Municipal Water Sewer System's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Camas Municipal Water Sewer System serve?
Camas Municipal Water Sewer System serves approximately 31,794 people with drinking water across 5 ZIP codes.
What is Camas Municipal Water Sewer System's water source?
Camas Municipal Water Sewer System draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Camas Municipal Water Sewer System's water?
The maximum detected lead level is 0.0015 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Camas Municipal Water Sewer System's service area?
The Camas Municipal Water Sewer System service area has a median household income of $95,863. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Camas Municipal Water Sewer System get its water?
Camas Municipal Water Sewer System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Camas Municipal Water Sewer System (EPA ID: WA5310800) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Washington Camas Municipal Water Sewer System

Get safety alerts for Camas Municipal Water Sewer System, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.