Monitoring Violations WA

City of Bothell Water

EPA ID: WA5307900 · 33,643 people served · 7 ZIP codes

Unlike fully compliant utilities, City of Bothell Water has 1 outstanding EPA violation for approximately 33,643 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 84
Avg Safety Score
33,643
People Served
7
ZIP Codes Served
4
Violations (5yr)
Surface Water
Water Source
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$882K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Bothell Water Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$139,790
Median Household Income
240,170
Service Area Population
11%
Disadvantaged Population
30th
Poverty Percentile
13th
Energy Burden Percentile
44%
Pre-1986 Housing

The City of Bothell Water serves a community with a median household income of $139,790 and an estimated 240,170 residents across its service area. Approximately 44% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

City of Bothell Water's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
17th
Wastewater Discharge Proximity
59th
Superfund Site Proximity

About 2% of homes in King County, Washington rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

40 yr
Avg Pipe Age
Copper
Pipe Material
29 yr
Est. Remaining Life
Stable
Decay Status
Installed 58% of expected lifespan used End of life

Detected Contaminants

How City of Bothell Water compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded.

State limits: PFOA: 0.01 ppt, PFOS: 0.015 ppt, PFHxS: 0.065 ppt, PFBS: 0.345 ppt, HFPO-DA: 0.024 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Washington

City of Edmonds
34,023 people
A 1 violation
City of Moses Lake
32,428 people
B 16 violations
Spanaway Water Company
31,908 people
A 3 violations
C 2 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,400
PFAS Treatment $167
Total Estimated Cost $1,567

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,567 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Bothell Water (EPA ID: WA5307900) is a community water system in Washington that serves approximately 33,643 people from surface water sources.

This system provides water to 7 ZIP codes across 4 communities.

Average Home Safety Score: B (84/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
March 1, 2024 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2024 Total Trihalomethanes (TTHM) Monitoring Unresolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 2 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 5 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Bothell Water (WA5307900) on EPA.gov.

Frequently Asked Questions

Is City of Bothell Water water safe to drink?

City of Bothell Water has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Bothell Water serve?

City of Bothell Water serves approximately 33,643 people across 7 ZIP codes in Washington.

Where does City of Bothell Water get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
5,122
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Population served: 33,643
Reported to Washington

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Bothell Water safe to drink?
City of Bothell Water earns a B safety grade with 4 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Bothell Water's water?
Detected contaminants include Total Trihalomethanes (TTHM), Surface Water Treatment Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Bothell Water serve?
City of Bothell Water serves approximately 33,643 people with drinking water across 7 ZIP codes.
What is City of Bothell Water's water source?
City of Bothell Water draws water from surface water sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of City of Bothell Water's service area?
The City of Bothell Water service area has a median household income of $139,790. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Bothell Water get its water?
City of Bothell Water's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Bothell Water (EPA ID: WA5307900) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Washington City of Bothell Water

Get safety alerts for City of Bothell Water, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.