Washington City
EPA ID: UTAH27021 · 45,865 people served · 4 ZIP codes
Looking at the EPA enforcement file for Washington City, 1 violation are listed as unresolved — those findings cover the utility's service area of approximately 45,865 people and remain open in the federal compliance system, awaiting formal corrective action documentation.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Washington City Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Washington City serves a community with a median household income of $78,069 and an estimated 155,765 residents across its service area.
🌊 Where Does Your Water Come From?
Washington City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Washington County, Utah rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Washington City compares to EPA limits
What This Means For You
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Utah
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Washington City (EPA ID: UTAH27021) is a community water system in Utah that serves approximately 45,865 people from surface water sources.
This system provides water to 4 ZIP codes across 3 communities.
Average Home Safety Score: C (64/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| September 1, 2025 | Consumer Confidence Report Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Washington City (UTAH27021) on EPA.gov.
Frequently Asked Questions
Is Washington City water safe to drink?
Washington City has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Washington City serve?
Washington City serves approximately 45,865 people across 4 ZIP codes in Utah.
Where does Washington City get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
- #40 / 50 Most Disadvantaged Populations Served (Utah)
- #25 / 49 Highest Exposure Burden (Utah)
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Washington City (EPA ID: UTAH27021) — request the latest Consumer Confidence Report or ask about specific contaminants.