Monitoring Violations UT

Santaquin City

EPA ID: UTAH25002 · 17,532 people served · 1 ZIP code

Five-year compliance data for Santaquin City includes 1 violation the EPA has not yet marked resolved — those open findings are part of the utility's current enforcement profile, covering a service population of approximately 17,532 residents across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

B · 81
Avg Safety Score
17,532
People Served
1
ZIP Code Served
1
Violations (5yr)
Groundwater
Water Source
0.0014 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$443K
Median Home Value in Service Area

Service Area Map

Coverage area for Santaquin City Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$97,003
Median Household Income
17,157
Service Area Population
8%
Disadvantaged Population
30th
Poverty Percentile
20th
Energy Burden Percentile
22%
Pre-1986 Housing

The Santaquin City serves a community with a median household income of $97,003 and an estimated 17,157 residents across its service area.

💧 Where Does Your Water Come From?

Groundwater

Santaquin City's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
70th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 1% of homes in Utah County, Utah rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.

Infrastructure Risk

20 yr
Avg Pipe Age
PEX or Copper
Pipe Material
45 yr
Est. Remaining Life
Stable
Decay Status
Installed 31% of expected lifespan used End of life

Detected Contaminants

How Santaquin City compares to EPA limits

What This Means For You

Total Coliform at 1 presence exceeds the EPA maximum of presence.

Comparable Water Systems

Similar-sized systems in Utah

B 2 violations
B 2 violations
Heber City Water System
19,000 people
B 3 violations
Payson City Water System
19,000 people
B 2 violations
White City Wid
15,800 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $1,800
Radon Mitigation $400
Total Estimated Cost $2,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,200 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Santaquin City (EPA ID: UTAH25002) is a community water system in Utah that serves approximately 17,532 people from groundwater sources.

This system serves ZIP code 84655 in Santaquin.

Average Home Safety Score: B (81/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
June 20, 2024 Total Coliform Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Coliform Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
84655 0.0014 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by UT or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Santaquin City (UTAH25002) on EPA.gov.

Frequently Asked Questions

Is Santaquin City water safe to drink?

Santaquin City has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Santaquin City serve?

Santaquin City serves approximately 17,532 people across 1 ZIP code in Utah.

Where does Santaquin City get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
232

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
612
Unknown Material
4,914
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 17,532
Reported to Utah

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Santaquin City safe to drink?
Santaquin City earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Santaquin City's water?
Detected contaminants include Total Coliform. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Santaquin City serve?
Santaquin City serves approximately 17,532 people with drinking water across 1 ZIP code.
What is Santaquin City's water source?
Santaquin City draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Santaquin City's water?
The maximum detected lead level is 0.0014 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Santaquin City's service area?
The Santaquin City service area has a median household income of $97,003. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Santaquin City get its water?
Santaquin City's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Santaquin City (EPA ID: UTAH25002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Utah Santaquin City

Get safety alerts for Santaquin City, Utah

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.