City of Poth
EPA ID: TX2470002 · 2,994 people served · 2 ZIP codes
ZipCheckup's reading of EPA SDWIS for City of Poth (TX2470002): 1 unresolved EPA violation on record. Tallying the federal enforcement file for City of Poth yields 1 open violation that has not been formally closed - each finding sits in the EPA database while the utility continues to deliver water to approximately 2,994 residents and works through the required corrective action process.
Data: EPA SDWIS
Service Area Map
Coverage area for City of Poth Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The City of Poth serves a community with a median household income of $81,576 and an estimated 4,904 residents across its service area. Approximately 51% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 53% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
City of Poth's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Infrastructure Risk
Detected Contaminants
How City of Poth compares to EPA limits
What This Means For You
Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Total Coliform at 1 presence exceeds the EPA maximum of presence.
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Poth (EPA ID: TX2470002) is a community water system in Texas that serves approximately 2,994 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 5 resolved, 0 archived, 0 addressed, and 1 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| October 1, 2025 | Stage 1 DBP Rule | Non-health-based | Unaddressed (current) |
| August 16, 2025 | Lead and Copper Rule | Non-health-based | Resolved |
| July 1, 2025 | Surface Water Treatment Rule | Non-health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Non-health-based | Resolved |
| May 10, 2024 | Total Coliform | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Stage 2 DBP Rule | Treatment Failure | 2 | Yes |
| Total Coliform | Microbiological | 1 | No |
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Lead and Copper Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.0005 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Poth (TX2470002) on EPA.gov.
Frequently Asked Questions
Is City of Poth water safe to drink?
The accepted 2026Q2 ECHO snapshot shows 1 current noncompliance record and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.
How many people does City of Poth serve?
City of Poth serves approximately 2,994 people across 2 ZIP codes in Texas.
Where does City of Poth get its water?
The primary water source is groundwater.
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). City of Poth (TX): 1 Health Violation. https://zipcheckup.com/water-system/tx2470002/
@misc{zipcheckup-water-system-tx2470002,
author = {{ZipCheckup}},
title = {{City of Poth (TX): 1 Health Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/tx2470002/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Poth (EPA ID: TX2470002) - request the latest Consumer Confidence Report or ask about specific contaminants.