Sebastian Municipal Utility District
EPA ID: TX2450006 · 1,884 people served · 2 ZIP codes
ZipCheckup's reading of EPA SDWIS for Sebastian Municipal Utility District (TX2450006): 3 unresolved EPA violations on record. Federal compliance records for Sebastian Municipal Utility District list 3 open violations that have not yet been resolved - the utility serves approximately 1,884 people, and each outstanding finding remains logged and active in the EPA enforcement database.
Data: EPA SDWIS
Service Area Map
Coverage area for Sebastian Municipal Utility District Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The Sebastian Municipal Utility District serves a community with a median household income of $40,694 and an estimated 5,382 residents across its service area. Approximately 53% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Sebastian Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
Infrastructure Risk
Detected Contaminants
How Sebastian Municipal Utility District compares to EPA limits
What This Means For You
Lead and Copper Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Fecal Coliform at 1 presence exceeds the EPA maximum of presence.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 9 detections recorded.
Chlorite was detected in this water system. ferrous sulfate reduction filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Sebastian Municipal Utility District (EPA ID: TX2450006) is a community water system in Texas that serves approximately 1,884 people from surface water sources.
This system provides water to 2 ZIP codes across 2 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 6 resolved, 0 archived, 0 addressed, and 3 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| November 1, 2025 | Fecal Coliform | Non-health-based | Resolved |
| July 1, 2025 | Surface Water Treatment Rule | Non-health-based | Unaddressed (current) |
| May 1, 2025 | Lead and Copper Rule | Non-health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Unaddressed (current) |
| October 17, 2024 | Stage 2 DBP Rule | Non-health-based | Unaddressed (current) |
| July 1, 2024 | Chlorite | Non-health-based | Resolved |
| August 1, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
| January 11, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
| January 11, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Lead and Copper Rule | Treatment Failure | 4 | No |
| Stage 2 DBP Rule | Treatment Failure | 2 | Yes |
| Chlorite | Disinfection Byproducts | 1 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Fecal Coliform | Microbiological | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Sebastian Municipal Utility District (TX2450006) on EPA.gov.
Frequently Asked Questions
Is Sebastian Municipal Utility District water safe to drink?
The accepted 2026Q2 ECHO snapshot shows 1 current health-based noncompliance record for Sebastian Municipal Utility District. Review the utility's current notices and EPA record. This system-level compliance history cannot determine conditions at a specific tap.
How many people does Sebastian Municipal Utility District serve?
Sebastian Municipal Utility District serves approximately 1,884 people across 2 ZIP codes in Texas.
Where does Sebastian Municipal Utility District get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Sebastian Municipal Utility District: 1 Health Violation. https://zipcheckup.com/water-system/tx2450006/
@misc{zipcheckup-water-system-tx2450006,
author = {{ZipCheckup}},
title = {{Sebastian Municipal Utility District: 1 Health Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/tx2450006/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Sebastian Municipal Utility District (EPA ID: TX2450006) - request the latest Consumer Confidence Report or ask about specific contaminants.