Monitoring Violations TX

City of Electra

EPA ID: TX2430002 · 2,559 people served · 2 ZIP codes

2 open EPA findings remain on record at City of Electra — the utility supplies approximately 2,559 people.

Data: EPA SDWIS Last verified: 2026-04-02

A · 94
Avg Safety Score
2,559
People Served
2
ZIP Codes Served
5
Violations (5yr)
Surface Water
Water Source
0.0041 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
4
Contaminants Flagged
$100K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 4 (2021) to 1 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Electra Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$72,053
Median Household Income
16,705
Service Area Population
56%
Disadvantaged Population
60th
Poverty Percentile
70th
Energy Burden Percentile
73%
Pre-1986 Housing

The City of Electra serves a community with a median household income of $72,053 and an estimated 16,705 residents across its service area. Approximately 73% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 56% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

City of Electra's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

About 2% of homes in Wichita County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

63 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
8 yr
Est. Remaining Life
Stable
Decay Status
Installed 89% of expected lifespan used End of life

Detected Contaminants

How City of Electra compares to EPA limits

What This Means For You

Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 2 detections recorded.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Texas

0 violations
City of Leonard
2,550 people
0 violations
City of Pottsboro
2,571 people
B 37 violations
0 violations
City of Seymour
2,576 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,800
PFAS Treatment $500
Total Estimated Cost $2,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,165
10 years
$10,330
20 years
$20,660

Compare: Estimated remediation cost is $2,300 (one-time) vs. $10,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Electra (EPA ID: TX2430002) is a community water system in Texas that serves approximately 2,559 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: A (94/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

5 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2023 Lead and Copper Rule Monitoring Unresolved
January 7, 2023 Lead and Copper Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Lead and Copper Rule Treatment Failure 2 No
Stage 1 DBP Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No
Revised Total Coliform Rule Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
76360 0.0041 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Electra (TX2430002) on EPA.gov.

Frequently Asked Questions

Is City of Electra water safe to drink?

City of Electra has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Electra serve?

City of Electra serves approximately 2,559 people across 2 ZIP codes in Texas.

Where does City of Electra get its water?

The primary water source is surface water.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
71
Galvanized — Replacement Required
913
Unknown Material
467
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 2,559
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Electra safe to drink?
City of Electra earns a A safety grade with 5 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Electra's water?
Detected contaminants include Lead and Copper Rule, Stage 1 DBP Rule, Consumer Confidence Report Rule, Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Electra serve?
City of Electra serves approximately 2,559 people with drinking water across 2 ZIP codes.
What is City of Electra's water source?
City of Electra draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Electra's water?
The maximum detected lead level is 0.0041 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Electra's service area?
The City of Electra service area has a median household income of $72,053. EPA EJScreen data classifies 56% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Electra get its water?
City of Electra's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Electra (EPA ID: TX2430002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Electra

Get safety alerts for City of Electra, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.