Health Violations Found TX 20 HEALTH VIOLATIONS

Riverside Special Utility District

EPA ID: TX2360010 · 6,492 people served · 6 ZIP codes

Riverside Special Utility District's current EPA file includes 14 unresolved violations — every outstanding finding is documented in federal records for this utility, which supplies water to approximately 6,492 residents across its service territory.

Data: EPA SDWIS Last verified: 2026-04-02

C · 65
Avg Safety Score
6,492
People Served
6
ZIP Codes Served
47
Violations (5yr)
Groundwater
Water Source
0.00239 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
7
Contaminants Flagged
$190K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 6 (2021) to 16 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Riverside Special Utility District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$59,432
Median Household Income
76,304
Service Area Population
68%
Disadvantaged Population
63th
Poverty Percentile
68th
Energy Burden Percentile
54%
Pre-1986 Housing

The Riverside Special Utility District serves a community with a median household income of $59,432 and an estimated 76,304 residents across its service area. Approximately 54% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 68% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Riverside Special Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
37th
Wastewater Discharge Proximity
25th
Superfund Site Proximity

About 2% of homes in Walker County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

57 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 71% of expected lifespan used End of life

Detected Contaminants

How Riverside Special Utility District compares to EPA limits

Haloacetic Acids (HAA5) 21 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Haloacetic Acids (HAA5) at 21 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Lead and Copper Rule at 15 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 5 presence exceeds the EPA maximum of presence.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 18 detections recorded. 4 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Texas

0 violations
City of White Oak
6,469 people
B 9 violations
City of Kenedy
6,454 people
A 9 violations
0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration PFAS Treatment
Flood Insurance $1,560
Water Filtration $540
PFAS Treatment $340
Total Estimated Cost $2,440

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

Estimated Property Value Decline $9,500

5% of median home value (EPA est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$12,415
10 years
$24,830
20 years
$49,660

Compare: Estimated remediation cost is $2,440 (one-time) vs. $24,830 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Riverside Special Utility District (EPA ID: TX2360010) is a community water system in Texas that serves approximately 6,492 people from groundwater sources.

This system provides water to 6 ZIP codes across 5 communities.

Average Home Safety Score: C (65/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

20 health-based violations recorded in the past 5 years. 14 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 30, 2025 Lead and Copper Rule Monitoring Resolved
July 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
May 1, 2025 Lead and Copper Rule Monitoring Unresolved
April 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
February 16, 2025 Lead and Copper Rule Monitoring Resolved
January 24, 2025 Lead and Copper Rule Monitoring Resolved
January 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
December 24, 2024 Haloacetic Acids (HAA5) Monitoring Resolved
December 1, 2024 Lead and Copper Rule Monitoring Resolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
October 1, 2024 Haloacetic Acids (HAA5) Health-based Unresolved
September 18, 2024 Lead and Copper Rule Monitoring Resolved
July 20, 2024 Lead and Copper Rule Monitoring Resolved
July 5, 2024 Lead and Copper Rule Monitoring Resolved
July 2, 2024 Surface Water Treatment Rule Monitoring Resolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
July 1, 2024 Haloacetic Acids (HAA5) Health-based Unresolved
April 1, 2024 Haloacetic Acids (HAA5) Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Haloacetic Acids (HAA5) Disinfection Byproducts 21 Yes
Lead and Copper Rule Treatment Failure 15 No
Revised Total Coliform Rule Microbiological 5 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Surface Water Treatment Rule Treatment Failure 2 No
Stage 1 DBP Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
77367 0.00239 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Riverside Special Utility District (TX2360010) on EPA.gov.

Frequently Asked Questions

Is Riverside Special Utility District water safe to drink?

Riverside Special Utility District has recorded 20 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Riverside Special Utility District serve?

Riverside Special Utility District serves approximately 6,492 people across 6 ZIP codes in Texas.

Where does Riverside Special Utility District get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
87
Detections
2
Latest sample
5/20/2025
Highest analyte
PFPeA: 6.6 ppt
Analyte Max detected Current MCL Status
PFPeA 6.6 ppt
PFBS 3.3 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
2,134
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 6,246
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Riverside Special Utility District safe to drink?
Riverside Special Utility District has a C safety grade based on 47 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Riverside Special Utility District's water?
Detected contaminants include Haloacetic Acids (HAA5), Lead and Copper Rule, Revised Total Coliform Rule, Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Riverside Special Utility District serve?
Riverside Special Utility District serves approximately 6,492 people with drinking water across 6 ZIP codes.
What is Riverside Special Utility District's water source?
Riverside Special Utility District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Riverside Special Utility District's water?
The maximum detected lead level is 0.00239 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Riverside Special Utility District's service area?
The Riverside Special Utility District service area has a median household income of $59,432. EPA EJScreen data classifies 68% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Riverside Special Utility District get its water?
Riverside Special Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Riverside Special Utility District (EPA ID: TX2360010) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas Riverside Special Utility District

Get safety alerts for Riverside Special Utility District, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.