City of Fort Worth
EPA ID: TX2200012 · 955,900 people served · 45 ZIP codes
ZipCheckup's reading of EPA SDWIS for City of Fort Worth (TX2200012): 1 past health-based violation, since resolved. Over the past five years, City of Fort Worth recorded 2 violations, all subsequently resolved through the EPA enforcement process - the supplier currently operates in good standing, with no active actions on file for its 955,900 residents.
Data: EPA SDWIS
Service Area Map
Coverage area for City of Fort Worth Source: EPA SDWIS service area boundaries.
Service area boundary - Grade B
Service Area Demographics
The City of Fort Worth serves a community with a median household income of $74,293 and an estimated 1,409,452 residents across its service area. Approximately 47% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
City of Fort Worth's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
Infrastructure Risk
Detected Contaminants
How City of Fort Worth compares to EPA limits
What This Means For You
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Contaminant 0800 at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 299 detections recorded. 126 exceed federal EPA limits (4 ppt for PFOA/PFOS).
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Fort Worth (EPA ID: TX2200012) is a community water system in Texas that serves approximately 955,900 people from surface water sources.
This system provides water to 45 ZIP codes across 14 communities.
ZIP-Area Home Safety Context: B (72/100)
This is the average Home Safety Score for 31 of 45 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.
Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.
Violation History
Status breakdown for accepted records with record years 2021-2026: 2 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 2, 2025 | Stage 2 DBP Rule | Non-health-based | Resolved |
| March 1, 2021 | Contaminant 0800 | Health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Stage 2 DBP Rule | Treatment Failure | 1 | No |
| Contaminant 0800 | Other Violation | 1 | Yes |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.003 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
This system serves 45 ZIP codes:
76008 · 76028 · 76035 · 76036 · 76040 76052 · 76053 · 76071 · 76102 · 76103 76104 · 76105 · 76106 · 76107 · 76108 76109 · 76110 · 76111 · 76112 · 76114 76115 · 76116 · 76117 · 76118 · 76119 76120 · 76123 · 76126 · 76127 · 76129 76131 · 76132 · 76133 · 76134 · 76135 76137 · 76140 · 76155 · 76164 · 76177 76179 · 76244 · 76247 · 76248 · 76262
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Fort Worth (TX2200012) on EPA.gov.
Frequently Asked Questions
Is City of Fort Worth water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Fort Worth; its 2 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does City of Fort Worth serve?
City of Fort Worth serves approximately 955,900 people across 45 ZIP codes in Texas.
Where does City of Fort Worth get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Above Current MCL
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS compounds were measured above the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
- #21 / 100 Highest Exposure Burden (U.S.)
- #4 / 50 Highest Exposure Burden (Texas)
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). City of Fort Worth (TX): 1 Health Violation. https://zipcheckup.com/water-system/tx2200012/
@misc{zipcheckup-water-system-tx2200012,
author = {{ZipCheckup}},
title = {{City of Fort Worth (TX): 1 Health Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/tx2200012/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Fort Worth (EPA ID: TX2200012) - request the latest Consumer Confidence Report or ask about specific contaminants.