Health Violations Found TX 1 HEALTH VIOLATION

City of Ingleside

EPA ID: TX2050002 · 10,106 people served · 2 ZIP codes

In the current EPA monitoring period, City of Ingleside has 2 violations still listed as unresolved, with the utility supplying water to approximately 10,106 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 79
Avg Safety Score
10,106
People Served
2
ZIP Codes Served
23
Violations (5yr)
Surface Water
Water Source
0.00299 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
7
Contaminants Flagged
$193K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2021) to 4 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Ingleside Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$68,617
Median Household Income
23,075
Service Area Population
63%
Disadvantaged Population
70th
Poverty Percentile
70th
Energy Burden Percentile
41%
Pre-1986 Housing

The City of Ingleside serves a community with a median household income of $68,617 and an estimated 23,075 residents across its service area. Approximately 41% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 63% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

City of Ingleside's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 3% of homes in San Patricio County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

30 yr
Avg Pipe Age
Copper
Pipe Material
41 yr
Est. Remaining Life
Stable
Decay Status
Installed 42% of expected lifespan used End of life

Detected Contaminants

How City of Ingleside compares to EPA limits

Haloacetic Acids (HAA5) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Haloacetic Acids (HAA5) at 2 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Stage 1 DBP Rule at 7 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 6 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 3 presence exceeds the EPA maximum of presence.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Texas

A 9 violations
City of Roanoke
10,127 people
A 0 violations
B 0 violations
B 0 violations
City of Silsbee
10,026 people
C 32 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Water Filtration
Flood Insurance $1,200
PFAS Treatment $500
Water Filtration $300
Total Estimated Cost $2,000

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$7,665
10 years
$15,330
20 years
$30,660

Compare: Estimated remediation cost is $2,000 (one-time) vs. $15,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Ingleside (EPA ID: TX2050002) is a community water system in Texas that serves approximately 10,106 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: B (79/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 2 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
July 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
May 15, 2025 Lead and Copper Rule Monitoring Unresolved
December 30, 2024 Stage 1 DBP Rule Monitoring Resolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
October 1, 2024 Stage 1 DBP Rule Monitoring Resolved
July 2, 2024 Surface Water Treatment Rule Monitoring Resolved
December 31, 2023 Lead and Copper Rule Monitoring Resolved
October 1, 2023 Stage 1 DBP Rule Monitoring Resolved
August 10, 2023 Lead and Copper Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 7 No
Lead and Copper Rule Treatment Failure 6 No
Revised Total Coliform Rule Microbiological 3 No
Haloacetic Acids (HAA5) Disinfection Byproducts 2 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Surface Water Treatment Rule Treatment Failure 2 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
78362 0.00299 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Ingleside (TX2050002) on EPA.gov.

Frequently Asked Questions

Is City of Ingleside water safe to drink?

City of Ingleside has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does City of Ingleside serve?

City of Ingleside serves approximately 10,106 people across 2 ZIP codes in Texas.

Where does City of Ingleside get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
232
Detections
10
Latest sample
2/11/2025
Highest analyte
PFBA: 8.2 ppt
Analyte Max detected Current MCL Status
PFBA 8.2 ppt
PFPeA 3.7 ppt
PFBS 3 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

3
Confirmed Lead
4
Galvanized — Replacement Required
0
Unknown Material
3,542
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-07-01 did not exceed the federal lead action level.
Reporting compliance issue flagged by EPA under Rule 2E.
Compliance issue flagged by EPA under Rule 4G.
Population served: 10,106
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Ingleside safe to drink?
City of Ingleside earns a B safety grade with 23 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Ingleside's water?
Detected contaminants include Haloacetic Acids (HAA5), Stage 1 DBP Rule, Lead and Copper Rule, Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Ingleside serve?
City of Ingleside serves approximately 10,106 people with drinking water across 2 ZIP codes.
What is City of Ingleside's water source?
City of Ingleside draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Ingleside's water?
The maximum detected lead level is 0.00299 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Ingleside's service area?
The City of Ingleside service area has a median household income of $68,617. EPA EJScreen data classifies 63% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Ingleside get its water?
City of Ingleside's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Ingleside (EPA ID: TX2050002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Ingleside

Get safety alerts for City of Ingleside, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.