Historical Compliance Records TX

City of Franklin

EPA ID: TX1980003 ยท 1,610 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for City of Franklin (TX1980003): 1 EPA violation in the last five years. Dating back across the full five-year EPA tracking window, City of Franklin encountered 1 violation, each subsequently remedied and closed - today the utility meets all federal drinking water requirements for the 1,610 residents in its service area and holds no open enforcement actions.

Data: EPA SDWIS

1,610
People Served
1
ZIP Code Served
1
Violations (5yr)
Groundwater
Water Source
1
Contaminants Flagged
$246K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Franklin Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$90,889
Median Household Income
4,832
Service Area Population
60%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
45%
Pre-1986 Housing

The City of Franklin serves a community with a median household income of $90,889 and an estimated 4,832 residents across its service area. Approximately 45% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 60% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

๐Ÿ’ง Where Does Your Water Come From?

Groundwater

City of Franklin's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

Infrastructure Risk

46 yr
Avg Pipe Age
Copper
Pipe Material
24 yr
Est. Remaining Life
Stable
Decay Status
Installed 66% of expected lifespan used End of life

Detected Contaminants

How City of Franklin compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Texas

City of Rollingwood
1,611 people
3 violations
12 violations
7 violations
City of Archer City
1,601 people
0 violations
City of Joaquin
1,620 people
25 violations

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Franklin (EPA ID: TX1980003) is a community water system in Texas that serves approximately 1,610 people from groundwater sources.

This system serves ZIP code 77856 in Franklin.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 1 record in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
August 1, 2025 Consumer Confidence Report Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Franklin (TX1980003) on EPA.gov.

Frequently Asked Questions

Is City of Franklin water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Franklin; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does City of Franklin serve?

City of Franklin serves approximately 1,610 people across 1 ZIP code in Texas.

Where does City of Franklin get its water?

The primary water source is groundwater.

Frequently Asked Questions

What contaminants are in City of Franklin's water?
Detected contaminants include Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Franklin serve?
City of Franklin serves approximately 1,610 people with drinking water across 1 ZIP code.
What is City of Franklin's water source?
City of Franklin draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of City of Franklin's service area?
The City of Franklin service area has a median household income of $90,889. EPA EJScreen data classifies 60% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Franklin get its water?
City of Franklin's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

How to cite this page

APA ZipCheckup. (n.d.). City of Franklin (TX): 1 EPA Violation. https://zipcheckup.com/water-system/tx1980003/
BibTeX
@misc{zipcheckup-water-system-tx1980003,
  author = {{ZipCheckup}},
  title  = {{City of Franklin (TX): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx1980003/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

City of Franklin (EPA ID: TX1980003) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Franklin

Get safety alerts for City of Franklin, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.