City of Mineral Wells
EPA ID: TX1820001 · 15,564 people served · 3 ZIP codes
Unlike fully compliant utilities, City of Mineral Wells has 4 outstanding EPA violations for approximately 15,564 residents.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 1 (2022) to 8 (2024). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for City of Mineral Wells Source: EPA SDWIS service area boundaries.
Service area boundary — Grade A
Service Area Demographics
The City of Mineral Wells serves a community with a median household income of $83,551 and an estimated 36,654 residents across its service area. Approximately 51% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 57% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
City of Mineral Wells's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Palo Pinto County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How City of Mineral Wells compares to EPA limits
What This Means For You
Contaminant 1009 at 1 mg/L exceeds the EPA maximum of 0.004 mg/L. Intestinal damage, bone damage. Consider reverse osmosis filtration.
Stage 2 DBP Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).
Contaminant 1009 was detected in this water system. reverse osmosis filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Mineral Wells (EPA ID: TX1820001) is a community water system in Texas that serves approximately 15,564 people from surface water sources.
This system provides water to 3 ZIP codes across 2 communities.
Average Home Safety Score: A (88/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| May 15, 2025 | Lead and Copper Rule | Monitoring | Resolved |
| May 1, 2025 | Lead and Copper Rule | Monitoring | Unresolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Monitoring | Resolved |
| August 1, 2023 | Contaminant 1009 | Health-based | Resolved |
| July 1, 2023 | Stage 1 DBP Rule | Monitoring | Resolved |
| January 1, 2023 | Stage 1 DBP Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Stage 2 DBP Rule | Treatment Failure | 4 | Yes |
| Stage 1 DBP Rule | Treatment Failure | 2 | No |
| Lead and Copper Rule | Treatment Failure | 2 | No |
| Contaminant 1009 | Other Violation | 1 | Yes |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Health Risk Details
Beryllium (EPA limit: 0.004 mg/L)
Intestinal damage, bone damage At-risk groups: long-term residents, people with gastrointestinal conditions.
Removal methods: reverse osmosis, activated alumina, coagulation/filtration. Find the right filter →
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Mineral Wells (TX1820001) on EPA.gov.
Frequently Asked Questions
Is City of Mineral Wells water safe to drink?
City of Mineral Wells has recorded 3 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does City of Mineral Wells serve?
City of Mineral Wells serves approximately 15,564 people across 3 ZIP codes in Texas.
Where does City of Mineral Wells get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Mineral Wells (EPA ID: TX1820001) — request the latest Consumer Confidence Report or ask about specific contaminants.