Health Violations Found TX 10 HEALTH VIOLATIONS

City of Stamford

EPA ID: TX1270003 · 3,101 people served · 2 ZIP codes

EPA compliance records for City of Stamford show 6 unresolved violations — findings that remain open and are tracked at the federal level, covering a service territory of approximately 3,101 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 65
Avg Safety Score
3,101
People Served
2
ZIP Codes Served
14
Violations (5yr)
Surface Water
Water Source
0.00872 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
5
Contaminants Flagged
$92K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 6 (2023) to 5 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Stamford Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$69,516
Median Household Income
3,258
Service Area Population
75%
Disadvantaged Population
70th
Poverty Percentile
60th
Energy Burden Percentile
83%
Pre-1986 Housing

The City of Stamford serves a community with a median household income of $69,516 and an estimated 3,258 residents across its service area. Approximately 83% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 75% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

City of Stamford's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
35th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

About 1% of homes in Haskell County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

99 yr
Avg Pipe Age
Galvanized Steel or Lead
Pipe Material
0 yr
Est. Remaining Life
Accelerating Decay
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How City of Stamford compares to EPA limits

Haloacetic Acids (HAA5) 7 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Haloacetic Acids (HAA5) at 7 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Texas

0 violations
Mclennan County Wcid 2
3,100 people
A 1 violation
City of San Saba
3,099 people
B 16 violations
0 violations
410 Water Supply
3,105 people
B 28 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $1,500
Water Filtration $300
Total Estimated Cost $1,800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Property Value Decline $4,603

5% of median home value (EPA est.)

Estimated Cumulative Cost Per Household

5 years
$7,300
10 years
$14,600
20 years
$29,200

Compare: Estimated remediation cost is $1,800 (one-time) vs. $14,600 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

CITY OF STAMFORD (EPA ID: TX1270003) is a community water system in Texas that serves approximately 3,101 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (65/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

10 health-based violations recorded in the past 5 years. 6 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
May 1, 2025 Lead and Copper Rule Monitoring Resolved
April 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
January 1, 2025 Haloacetic Acids (HAA5) Health-based Unresolved
October 17, 2024 Stage 2 DBP Rule Health-based Unresolved
October 17, 2024 Stage 2 DBP Rule Monitoring Unresolved
March 31, 2024 Stage 1 DBP Rule Monitoring Resolved
July 1, 2023 Consumer Confidence Report Rule Monitoring Resolved
April 1, 2023 Stage 1 DBP Rule Health-based Resolved
April 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved
March 31, 2023 Stage 1 DBP Rule Health-based Resolved
January 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Haloacetic Acids (HAA5) Disinfection Byproducts 7 Yes
Stage 1 DBP Rule Treatment Failure 3 Yes
Stage 2 DBP Rule Treatment Failure 2 Yes
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
79553 0.00872 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Stamford (TX1270003) on EPA.gov.

Frequently Asked Questions

Is City of Stamford water safe to drink?

City of Stamford has recorded 10 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does City of Stamford serve?

City of Stamford serves approximately 3,101 people across 2 ZIP codes in Texas.

Where does City of Stamford get its water?

The primary water source is surface water.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

3
Confirmed Lead
56
Galvanized — Replacement Required
64
Unknown Material
1,290
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 3,101
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Stamford safe to drink?
City of Stamford has a C safety grade based on 14 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in City of Stamford's water?
Detected contaminants include Haloacetic Acids (HAA5), Stage 1 DBP Rule, Stage 2 DBP Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Stamford serve?
City of Stamford serves approximately 3,101 people with drinking water across 2 ZIP codes.
What is City of Stamford's water source?
City of Stamford draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Stamford's water?
The maximum detected lead level is 0.00872 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Stamford's service area?
The City of Stamford service area has a median household income of $69,516. EPA EJScreen data classifies 75% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Stamford get its water?
City of Stamford's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Stamford (EPA ID: TX1270003) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Stamford

Get safety alerts for City of Stamford, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.