Current Noncompliance TX

Borger Municipal Water System

EPA ID: TX1170001 ยท 12,419 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for Borger Municipal Water System (TX1170001): 1 unresolved EPA violation on record. Borger Municipal Water System shows 1 open EPA violation in current federal records for approximately 12,419 people.

Data: EPA SDWIS

12,419
People Served
1
ZIP Code Served
1
Violations (5yr)
Surface Water
Water Source
0.00166 mg/L
Max Lead Level
Zone 2
Radon Risk ยท Moderate
1
Contaminants Flagged
$95K
Median Home Value in Service Area

Service Area Map

Coverage area for Borger Municipal Water System Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$61,701
Median Household Income
13,927
Service Area Population
43%
Disadvantaged Population
60th
Poverty Percentile
60th
Energy Burden Percentile
81%
Pre-1986 Housing

The Borger Municipal Water System serves a community with a median household income of $61,701 and an estimated 13,927 residents across its service area. Approximately 81% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 43% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Borger Municipal Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

Infrastructure Risk

62 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
3 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 95% of expected lifespan used End of life

Detected Contaminants

How Borger Municipal Water System compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Texas

City of Sweetwater
12,401 people
0 violations
City of Cleveland
12,438 people
3 violations
0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,200
Radon Mitigation $400
Water Filtration $300
Total Estimated Cost $1,900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,900 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Borger Municipal Water System (EPA ID: TX1170001) is a community water system in Texas that serves approximately 12,419 people from surface water sources.

This system serves ZIP code 79007 in Borger.

Violation History

1 current noncompliance record in the accepted 2026Q2 snapshot; none are classified as health-based in this evidence.

Status breakdown for accepted records with record years 2021-2026: 0 resolved, 0 archived, 0 addressed, and 1 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Non-health-based Unaddressed (current)

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.00166 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Borger Municipal Water System (TX1170001) on EPA.gov.

Frequently Asked Questions

Is Borger Municipal Water System water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 1 current noncompliance record and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.

How many people does Borger Municipal Water System serve?

Borger Municipal Water System serves approximately 12,419 people across 1 ZIP code in Texas.

Where does Borger Municipal Water System get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
232

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

What contaminants are in Borger Municipal Water System's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Borger Municipal Water System serve?
Borger Municipal Water System serves approximately 12,419 people with drinking water across 1 ZIP code.
What is Borger Municipal Water System's water source?
Borger Municipal Water System draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Borger Municipal Water System's water?
The maximum detected lead level is 0.00166 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Borger Municipal Water System's service area?
The Borger Municipal Water System service area has a median household income of $61,701. EPA EJScreen data classifies 43% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Borger Municipal Water System get its water?
Borger Municipal Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Borger Municipal Water System (TX): 1 EPA Violation. https://zipcheckup.com/water-system/tx1170001/
BibTeX
@misc{zipcheckup-water-system-tx1170001,
  author = {{ZipCheckup}},
  title  = {{Borger Municipal Water System (TX): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx1170001/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Borger Municipal Water System (EPA ID: TX1170001) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas Borger Municipal Water System

Get safety alerts for Borger Municipal Water System, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.