Acton Municipal Utility District
EPA ID: TX1110007 · 20,458 people served · 3 ZIP codes
While corrective steps may be in progress, Acton Municipal Utility District currently shows 4 EPA violations unresolved — serving a population of approximately 20,458.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 2 (2022) to 16 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Acton Municipal Utility District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Acton Municipal Utility District serves a community with a median household income of $69,870 and an estimated 85,458 residents across its service area.
Environmental Justice Note: 32% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Acton Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Johnson County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Acton Municipal Utility District compares to EPA limits
What This Means For You
Contaminant 2110 at 1 mg/L exceeds the EPA maximum of 0.005 mg/L. Leukemia & blood cancers (known carcinogen). Consider granular activated carbon (GAC) filtration.
Lead at 1 mg/L (action level) exceeds the EPA maximum of 0.015 mg/L (action level). Brain damage in children, kidney & blood pressure in adults. Consider reverse osmosis filtration.
Consumer Confidence Report Rule at 7 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 5 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 5 presence exceeds the EPA maximum of presence.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded.
Contaminant 2110 was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Acton Municipal Utility District (EPA ID: TX1110007) is a community water system in Texas that serves approximately 20,458 people from surface water sources.
This system provides water to 3 ZIP codes across 2 communities.
Average Home Safety Score: B (82/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Monitoring | Resolved |
| June 1, 2024 | Lead and Copper Rule | Monitoring | Unresolved |
| March 31, 2024 | Stage 1 DBP Rule | Monitoring | Resolved |
| September 29, 2023 | Stage 1 DBP Rule | Monitoring | Resolved |
| May 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| April 1, 2023 | Revised Total Coliform Rule | Monitoring | Unresolved |
| April 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| February 1, 2023 | Lead and Copper Rule | Monitoring | Resolved |
| January 1, 2023 | Contaminant 2959 | Monitoring | Unresolved |
| January 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 7 | Yes |
| Lead and Copper Rule | Treatment Failure | 5 | No |
| Revised Total Coliform Rule | Microbiological | 5 | No |
| Surface Water Treatment Rule | Treatment Failure | 4 | No |
| Stage 1 DBP Rule | Treatment Failure | 3 | No |
| Total Coliform | Microbiological | 2 | No |
| Stage 2 DBP Rule | Treatment Failure | 2 | Yes |
| Lead | Inorganic | 1 | No |
| Contaminant 2110 | Other Violation | 1 | No |
| Contaminant 2959 | Other Violation | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Acton Municipal Utility District (TX1110007) on EPA.gov.
Frequently Asked Questions
Is Acton Municipal Utility District water safe to drink?
Acton Municipal Utility District has recorded 3 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Acton Municipal Utility District serve?
Acton Municipal Utility District serves approximately 20,458 people across 3 ZIP codes in Texas.
Where does Acton Municipal Utility District get its water?
The primary water source is surface water.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from Acton Municipal Utility District Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: Acton Municipal Utility District Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Watershed exposure sources reported
Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.
Treatment classification and chemical list sourced from Acton Municipal Utility District Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Replacement Tracker
This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.
Acton Municipal Utility District
ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.
Learn more about Lead and Copper Rule replacement requirements →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Acton Municipal Utility District (EPA ID: TX1110007) — request the latest Consumer Confidence Report or ask about specific contaminants.