Current Noncompliance TX

City of Marion

EPA ID: TX0940001 ยท 1,971 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for City of Marion (TX0940001): 1 unresolved EPA violation on record. With 1 unresolved EPA violation, City of Marion is currently out of full compliance - approximately 1,971 people in its service area.

Data: EPA SDWIS

1,971
People Served
1
ZIP Code Served
3
Violations (5yr)
Surface Water
Water Source
0.005 mg/L
Max Lead Level
3
Contaminants Flagged
$282K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Marion Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$82,534
Median Household Income
6,907
Service Area Population
21%
Disadvantaged Population
40th
Poverty Percentile
30th
Energy Burden Percentile
33%
Pre-1986 Housing

The City of Marion serves a community with a median household income of $82,534 and an estimated 6,907 residents across its service area.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

City of Marion's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

Infrastructure Risk

32 yr
Avg Pipe Age
Copper
Pipe Material
38 yr
Est. Remaining Life
Stable
Decay Status
Installed 46% of expected lifespan used End of life

Detected Contaminants

How City of Marion compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Texas

City of San Augustine
1,971 people
25 violations
City of Flatonia
1,969 people
10 violations
19 violations
Ivanhoe Land of Lakes
1,968 people
2 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,800
PFAS Treatment $500
Total Estimated Cost $2,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,300 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Marion (EPA ID: TX0940001) is a community water system in Texas that serves approximately 1,971 people from surface water sources.

This system serves ZIP code 78124 in Marion.

Violation History

1 current noncompliance record in the accepted 2026Q2 snapshot; none are classified as health-based in this evidence.

Status breakdown for accepted records with record years 2021-2026: 2 resolved, 0 archived, 0 addressed, and 1 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Non-health-based Unaddressed (current)
July 1, 2025 Revised Total Coliform Rule Non-health-based Resolved
October 2, 2021 Lead and Copper Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No
Revised Total Coliform Rule Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.005 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Marion (TX0940001) on EPA.gov.

Frequently Asked Questions

Is City of Marion water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 1 current noncompliance record and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.

How many people does City of Marion serve?

City of Marion serves approximately 1,971 people across 1 ZIP code in Texas.

Where does City of Marion get its water?

The primary water source is surface water.

Frequently Asked Questions

What contaminants are in City of Marion's water?
Detected contaminants include Stage 2 DBP Rule, Lead and Copper Rule, Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Marion serve?
City of Marion serves approximately 1,971 people with drinking water across 1 ZIP code.
What is City of Marion's water source?
City of Marion draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Marion's water?
The maximum detected lead level is 0.005 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Marion's service area?
The City of Marion service area has a median household income of $82,534. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Marion get its water?
City of Marion's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on the exported violation history and environmental factors, the source contamination risk is classified as elevated.

How to cite this page

APA ZipCheckup. (n.d.). City of Marion (TX): 3 EPA Violations. https://zipcheckup.com/water-system/tx0940001/
BibTeX
@misc{zipcheckup-water-system-tx0940001,
  author = {{ZipCheckup}},
  title  = {{City of Marion (TX): 3 EPA Violations}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx0940001/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

City of Marion (EPA ID: TX0940001) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Marion

Get safety alerts for City of Marion, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.