Water System Report TX

Bacliff Municipal Utility District

EPA ID: TX0840011 · 8,900 people served · 3 ZIP codes

Over five tracked years, Bacliff Municipal Utility District has stayed completely violation-free for its 8,900 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 72
Avg Safety Score
8,900
People Served
3
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.00612 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
0
Contaminants Flagged
$246K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2021) to 3 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Bacliff Municipal Utility District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$85,263
Median Household Income
154,970
Service Area Population
42%
Disadvantaged Population
40th
Poverty Percentile
40th
Energy Burden Percentile
39%
Pre-1986 Housing

The Bacliff Municipal Utility District serves a community with a median household income of $85,263 and an estimated 154,970 residents across its service area.

Environmental Justice Note: 42% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Bacliff Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 1% of homes in Galveston County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

36 yr
Avg Pipe Age
Copper
Pipe Material
34 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 51% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 13 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Texas

B 1 violation
0 violations
City of Hillsboro
8,867 people
A 22 violations
A 1 violation
Town of Highland Park
8,959 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Water Filtration
Flood Insurance $2,033
PFAS Treatment $533
Water Filtration $300
Total Estimated Cost $2,867

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $2,867 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bacliff Municipal Utility District (EPA ID: TX0840011) is a community water system in Texas that serves approximately 8,900 people from surface water sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: B (72/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
77518 0.00612 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bacliff Municipal Utility District (TX0840011) on EPA.gov.

Frequently Asked Questions

Is Bacliff Municipal Utility District water safe to drink?

Based on EPA records, Bacliff Municipal Utility District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Bacliff Municipal Utility District serve?

Bacliff Municipal Utility District serves approximately 8,900 people across 3 ZIP codes in Texas.

Where does Bacliff Municipal Utility District get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
87
Detections
7
Latest sample
9/17/2025
Highest analyte
PFPeA: 35.1 ppt
Analyte Max detected Current MCL Status
PFPeA 35.1 ppt
PFBA 13.1 ppt
PFHxA 3.6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
2,216
Unknown Material
1,898
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 8,900
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Bacliff Municipal Utility District safe to drink?
Bacliff Municipal Utility District earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
Bacliff Municipal Utility District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Bacliff Municipal Utility District serve?
Bacliff Municipal Utility District serves approximately 8,900 people with drinking water across 3 ZIP codes.
What is Bacliff Municipal Utility District's water source?
Bacliff Municipal Utility District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bacliff Municipal Utility District's water?
The maximum detected lead level is 0.00612 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bacliff Municipal Utility District's service area?
The Bacliff Municipal Utility District service area has a median household income of $85,263. EPA EJScreen data classifies 42% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Bacliff Municipal Utility District get its water?
Bacliff Municipal Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.
Home Water Systems Texas Bacliff Municipal Utility District

Get safety alerts for Bacliff Municipal Utility District, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.