Sienna Municipal Utility District 10
EPA ID: TX0790452 · 7,824 people served · 1 ZIP code
ZipCheckup's reading of EPA records for Sienna Municipal Utility District 10 (TX0790452): 1 violation on record since 2021. Sienna Municipal Utility District 10 has 1 EPA violation on record, all marked resolved in the federal data; the utility serves 7,824 residents.
Data: EPA SDWIS
Service Area Map
Coverage area for Sienna Municipal Utility District 10 Source: EPA SDWIS service area boundaries.
Service area boundary
Demographics of ZIP Codes Served
The ZIP codes associated with Sienna Municipal Utility District 10 have a median household income of $132,758 and about 81,251 residents live in those ZIP codes (Census; not the number of people this system supplies).
💧 Where Does Your Water Come From?
Sienna Municipal Utility District 10's water is classified in EPA records as a groundwater source. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
PFAS in ZIP Codes This System Serves
PFAS ("forever chemicals") have been reported in samples from water systems associated with the ZIP codes in this system's area. These results can come from other water systems serving the same ZIP codes; check the UCMR5 section for any results reported for this system. 4 detections recorded.
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Sienna Municipal Utility District 10 (EPA ID: TX0790452) is a community water system in Texas that serves approximately 7,824 people from groundwater sources.
This system serves ZIP code 77459 in Missouri City.
Violation History
Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| November 1, 2025 | Revised Total Coliform Rule | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Revised Total Coliform Rule | Monitoring & Reporting | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Ask your water utility whether running cold water for 2 minutes is enough to flush your plumbing before drinking.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
- 77459 - Missouri City
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for Sienna Municipal Utility District 10 (TX0790452) on EPA.gov.
Frequently Asked Questions
Is Sienna Municipal Utility District 10 water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Sienna Municipal Utility District 10; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Sienna Municipal Utility District 10 serve?
Sienna Municipal Utility District 10 serves approximately 7,824 people across 1 ZIP code in Texas.
Where does Sienna Municipal Utility District 10 get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected; the table compares each one with the EPA MCL where one exists (April 2024 rule, compliance required from 2029) and with this state's enforceable standard where one exists.
EPA's April 2024 PFAS rule sets MCLs of 4 ppt for PFOA and PFOS and 10 ppt for PFHxS, PFNA and HFPO-DA (GenX); water systems must comply from 2029. Other PFAS compounds have no individual federal MCL. A state standard is shown only where this system's state has its own enforceable PFAS limit. Detection results are EPA UCMR5 samples, not a measurement at your tap.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Sienna Municipal Utility District 10 (TX): 1 EPA Violation. https://zipcheckup.com/water-system/tx0790452/
@misc{zipcheckup-water-system-tx0790452,
author = {{ZipCheckup}},
title = {{Sienna Municipal Utility District 10 (TX): 1 EPA Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/tx0790452/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Sienna Municipal Utility District 10 (EPA ID: TX0790452) - request the latest Consumer Confidence Report or ask about specific contaminants.